Fully redundant decimal addition and subtraction using stored-unibit encoding

Decimal computer arithmetic is experiencing a revived popularity, and there is quest for high-performance decimal hardware units. Successful experiences on binary computer arithmetic may find grounds in decimal arithmetic. For example, the traditional fully redundant (i.e., the result and both of the operands are represented in a redundant format) and semi-redundant (i.e., the result and only one of the operands are redundant) binary addition schemes have influenced the design and implementation of similar decimal arithmetic units. However, special comparison and correction steps are required when decimal arithmetic algorithms are implemented on binary hardware. To circumvent these difficulties, alternative encodings of decimal digits and a variety of decimal arithmetic algorithms have been examined by many researchers over decades. In this paper we offer a new redundant decimal digit set [−8, 9] and a fully redundant addition/subtraction scheme. The proposed digit set, faithfully encoded as a mix of posibits, negabits, and unibits, is shown to obviate the need for any compare-to-9 operations and leads to minimal penalty subtraction using the addition circuitry. Moreover, conversion from the standard BCD encoding to the proposed stored-unibit encoding is possible with the latency of one logic level. However, the reverse conversion, like any other redundant to nonredundant conversion, involves carry propagation.     

Signal Integrity: Fault Modeling and Testing in High-Speed SoCs

As we approach 100 nm technology the interconnect issues are becoming one of the main concerns in the testing of gigahertz system-on-chips. Voltage distortion (noise) and delay violations (skew) contribute to the signal integrity loss and ultimately functional error, performance degradation and reliability problems. In this paper, we first define a model for integrity faults on the high-speed interconnects. Then, we present a BIST-based test methodology that includes two special cells to detect and measure noise and skew occurring on the interconnects of the gigahertz system-on-chips. Using an inexpensive test architecture the integrity information accumulated by these special cells can be scanned out for final test and reliability analysis.     

Functionalization of Graphene Oxide Films with Au and MoOx Nanoparticles as Efficient p‐Contact Electrodes for Inverted Planar Perovskite Solar Cells

A graphene oxide (GO) film is functionalized with metal (Au) and metal‐oxide (MoO_x) nanoparticles (NPs) as a hole‐extraction layer for high‐performance inverted planar‐heterojunction perovskite solar cells (PSCs). These NPs can increase the work function of GO, which is confirmed with X‐ray photoelectron spectra, Kelvin probe force microscopy, and ultraviolet photoelectron spectra measurements. The down‐shifts of work functions lead to a decreased level of potential energy and hence increased V_oc of the PSC devices. Although the GO‐AuNP film shows rapid hole extraction and increased V_oc, a J_sc improvement is not observed because of localization of the extracted holes inside the AuNP that leads to rapid charge recombination, which is confirmed with transient photoelectric measurements. The power conversion efficiency (PCE) of the GO‐AuNP device attains 14.6%, which is comparable with that of the GO‐based device (14.4%). In contrast, the rapid hole extraction from perovskite to the GO‐MoO_x layer does not cause trapping of holes and delocalization of holes in the GO film accelerates rapid charge transfer to the indium tin oxide substrate; charge recombination in the perovskite/GO‐MoO_x interface is hence significantly retarded. The GO‐MoO_x device consequently shows significantly enhanced V_oc and J_sc, for which its device performance attains PCE of 16.7% with great reproducibility and enduring stability.     

Down-link OFDRMA communications

Wireless Networks - Orthogonal frequency-division multiplexing with random multiple access (OFDRMA) is discussed for down-link communications, whereby a single base-station transmits information...     

Superior Thermoelectric Performance of Textured Ca3Co4−xO9+δ Ceramic Nanoribbons

Calcium cobaltite Ca₃Co_4−xO_9+δ (CCO) is a promising p-type thermoelectric (TE) material for high-temperature applications in air. The grains of the material exhibit strong anisotropic properties, making texturing and nanostructuring mostly favored to improve thermoelectric performance. On the one hand multitude of interfaces are needed within the bulk material to create reflecting surfaces that can lower the thermal conductivity. On the other hand, low residual porosity is needed to improve the contact between grains and raise the electrical conductivity. In this study, CCO fibers with 100% flat cross sections in a stacked, compact form are electrospun. Then the grains within the nanoribbons in the plane of the fibers are grown. Finally, the nanoribbons are electrospun into a textured ceramic that features simultaneously a high electrical conductivity of 177 S cm⁻¹ and an immensely enhanced Seebeck coefficient of 200 µV K⁻¹ at 1073 K are assembled. The power factor of 4.68 µW cm⁻¹ K⁻² at 1073 K in air surpasses all previous CCO TE performances of nanofiber ceramics by a factor of two. Given the relatively high power factor combined with low thermal conductivity, a relatively large figure-of-merit of 0.3 at 873 K in the air for the textured nanoribbon ceramic is obtained.     

Task scheduling mechanisms in cloud computing: A systematic review

Today, cloud computing has developed as one of the important emergent technologies in communication and Internet. It offers on demand, pay per use access to infrastructure, platforms, and applications. Due to the increase in its popularity, the huge number of requests need to be handled in an efficient manner. Task scheduling as one of the challenges in the cloud computing supports the requests for assigning a particular resource so as to perform effectively. In the resource management, task scheduling is performed where there is the dependency between tasks. Many approaches and case studies have been developed for the scheduling of these tasks. Up to now, a systematic literature review (SLR) has not been presented to discover and evaluate the task scheduling approaches in the cloud computing environment. To overcome, this paper presents an SLR‐based analysis on the task scheduling approaches that classify into (a) single cloud environments that evaluate cost‐aware, energy‐aware, multi‐objective, and QoS‐aware approaches in task scheduling; (b) multicloud environment that evaluates cost‐aware, multi‐objective, and QoS‐aware task scheduling; and (c) mobile cloud environment that is energy‐aware and QoS‐aware task scheduling. The analytical discussions are provided to show the advantages and limitations of the existing approaches.     

Cardiac motion and deformation recovery from MRI: a review

Magnetic resonance imaging (MRI) is a highly advanced and sophisticated imaging modality for cardiac motion tracking and analysis, capable of providing 3D analysis of global and regional cardiac function with great accuracy and reproducibility. In the past few years, numerous efforts have been devoted to cardiac motion recovery and deformation analysis from MR image sequences. Many approaches have been proposed for tracking cardiac motion and for computing deformation parameters and mechanical properties of the heart from a variety of cardiac MR imaging techniques. In this paper, an updated and critical review of cardiac motion tracking methods including major references and those proposed in the past ten years is provided. The MR imaging and analysis techniques surveyed are based on cine MRI, tagged MRI, phase contrast MRI, DENSE, and SENC. This paper can serve as a tutorial for new researchers entering the field.     

Thermal annealing effect on zinc nitride thin films deposited by reactive rf-magnetron sputtering process

Zinc nitride films were deposited by reactive radio-frequency magnetron sputtering using a zinc target in a nitrogen and argon plasma. The deposited films were annealed in either air or O₂ at 300 °C to investigate the annealing effect on the microstructure, optical properties, and electronic characteristics of zinc nitride films. It was found that the annealing process decreased the crystallinity of zinc nitride films. It was also found that the optical band gap decreased from 1.33 eV to 1.14 eV after annealing. The analysis of film composition suggested that the concentration of oxygen increased slightly after annealing. Although the conduction type of both as-deposited and annealed films were n-type, the annealed films exhibited a higher resistivity, lower carrier concentration and lower mobility than the as-deposited films. Also, it was found that the as-deposited films did not exhibit any photoconducting behavior whereas the annealed films exhibited a pronounced photoconducting behavior.     

Polarizability,Susceptibility, and Dielectric Constant of Nanometer‐Scale Molecular Films: A Microscopic View

The size‐dependence of the polarizability, susceptibility, and dielectric constant of nanometer‐scale molecular layers is explored theoretically. First‐principles calculations based on density functional theory are compared to phenomenological modeling based on polarizable dipolar arrays for a model system of organized monolayers composed of oligophenyl chains. Size trends for all three quantities are primarily governed by a competition between out‐of‐plane polarization enhancement and in‐plane polarization suppression. Molecular packing density is the single most important factor controlling this competition and it strongly affects the bulk limit of the dielectric constant as well as the rate at which it is approached. Finally, the polarization does not reach its “bulk” limit, as determined from the Clausius–Mossotti model, but the susceptibility and dielectric constant do converge to the correct bulk limit. However, whereas the Clausius–Mossotti model describes the dielectric constant well at low lateral densities, finite size effects of the monomer units cause it to be increasingly inaccurate at high lateral densities.