Measurement of the delayed-neutron yields in the fission of233U,236U,237Np,240Pu,and241Pu by neutrons from the spectrum of a fast reactor

Translated from Atomnaya Énergiya, Vol. 66, No. 2, pp. 100–103, February, 1989.     

Magnetic anisotropy of Co-Cr thin films as a function of substrate temperature during deposition

A sequence of Co78Cr22films, 500 nm in thickness, was prepared by deposition on glass in a modified Varian D.C. magnetron S-gun sputtering system. The substrate temperature during deposition, Ts, was fixed at various values with an upper limit of 300°C. Specimens were examined by VSM, TM, FMR and TEM. Msrises significantly with increasing Ts, peaking at 200°C at 370 emu/cm³. The effective volume-averaged anisotropy drops for Ts>110°C from +1.6 KOe to progressively negative values (-4.3 KOe at 300°C). From FMR we find indications of the presence, in addition to the transition and bulk layers, of a highly negative anisotropy constituent (sim-11.5KOe anisotropy field). This resonance appears at Tsvalues of 150°C and above. TEM plane and cross-section views taken on a Ts= 150°C specimen show islands composed of tilted columns within the bulk. For vertical recording, specimens prepared at Tsvalues between 50 and 100°C are recommended. On the other hand, for longitudinal recording applications, films prepared at Tsvalues above 250°C would seem to be appropriate.     

Mixed mode fatigue crack growth predictions

This work is aimed at developing a predictive capability for the quantitative assessment of crack growth under fatigue loadings. The crack growth rate relation, $\text{Δa}\text{ΔN}$, may involve all three stress intensity factors k₁-k₃ such that the direction of crack growth may not be known in advance and must be predicted from a preassumed criterion. In principle, both the stress amplitude and the mean stress level should be included in the original expression for $\text{Δa}\text{ΔN}$.The strain energy density factor range, ΔS, is found to be a convenient parameter for predicting fatigue crack growth and can be applied expediently to examine the combined influence of crack geometry, complex loadings and material properties. Assumed is the accumulation of energy, $\text{ΔW}\text{ΔV}$, stored in an element ahead of the crack which triggers subcritical crack growth upon reaching a number of loading cycle, say ΔN. The proposed $\text{δa}\text{ΔN}$ relationship includes both the stress amplitude and mean stress effects.     

High-voltage bridge for measuring spontaneous polarization,dielectric constants,and conductivity of ferroelectric crystals

Translated from Izmeritel'naya Tekhnika, No. 9, pp. 34–35, September, 1989.     

The evolution of RFID security

As RFID technology progresses, security and privacy threats also evolve. By examining RFID's history, we can learn from past mistakes, rediscover successful solutions, and inspire future research.     

Phase transformations in highly disperse powders during their rapid heating and cooling

Phase transformations in particles of ultrafine powders of graphite, hexagonal boron nitride, and quartz during rapid heating and cooling by passage through a laser beam were investigated. A continuous infrared laser with a wavelength of 10.6 μm was used as a heat source through which the powders were recycled several times. Methods of concentrating the product phases are described. Particles of diamond, carbides, cubic boron nitride, koesite and stishovite were obtained in the mixed products.     

Primary hydration of poly(acrylic acid) sodium salts

Summary The equilibrium water contents of linear poly(acrylic acid) sodium salts with different degrees of neutralisation were found to be dependent on temperature and relative humidity. An octahedral model for the primary hydration of poly(acrylic acid) sodium salts (HIRAOKA and YOKOYAMA 1980) was critically evaluated in the light of these findings and an anomaly in the water uptake versus neutralisation curve at approximately 33% neutralisation was explained by the counterion condensation theory. (MANNING 1979).