Processing and characterization of nanostructured Cu-carbon nanotube composites

Carbon nanotube (CNT) reinforced nanostructured Cu matrix composite with a grain size less than 25 nm has been successfully fabricated via a combination of ball milling and high-pressure torsion. CNTs were found to be homogeneously dispersed into the metal matrix, leading to grain refinement with a narrow grain size distribution and significant increase in hardness.     

Poly(3-hexylthiophene) and hexafluoro-2-propanol-substituted polysiloxane based OFETs as a sensor for explosive vapor detection

The organic field effect transistors (OFETs) with regioregular poly 3-hexylthiophene (rr-P3HT) and hexafluoro-2-propanol-substituted polysiloxane (SXFA) as an organic layer, have been used for detection of explosive vapors with excellent sensitivity of less than 70 ppt for 1,3,5-trinitro-1,3,5-triazacyclohexane (RDX) and less than 100 ppt for 2,4,6-trinitrotoluene (TNT). The sensor response (% change in saturation current) was found to be 125 ± 10% for TNT and 90 ± 10% for RDX. It was also observed that the incorporation of Cu^II tetraphenylporphyrin (CuTPP) into rr-P3HT/SXFA matrix resulted in an improved selectivity for the vapors of nitro based analytes (TNT, RDX and DNB) as compared to the vapors of non explosive oxidizing agents such as nitrobenzene (NB), benzoquinone (BQ) and benzophenone (BP). This is attributed to the increased binding of the vapors containing nitro compound to the thin films due to the presence of CuTTP. Spin coated thin films were further characterized by Atomic Force Microscopy (AFM) and Electrostatic Force Microscopy (EFM).     

Deformation Behavior of Metastable Austenitic Steel at Low and Moderate Temperatures

Metal Science and Heat Treatment - The TRIP effect and deformation behavior of metastable austenitic steel were studied under tension in the temperatures range from –120 to +200°C. The...     

Effect of Retrogression and Re-Aging on Tensile Mechanical Properties in Transverse Direction of Extruded Rods from Aluminum Alloy AA7049

Metal Science and Heat Treatment - The effect retrogression and re-aging (RRA treatment) on the tensile properties in the transverse direction of extruded rods from aluminum alloy AA7049 is...     

Modeling the drain current and its equation parameters for lightly doped symmetrical double-gate MOSFETs

A 2D model for the potential distribution in silicon film is derived for a symmetrical double gate MOSFET in weak inversion. This 2D potential distribution model is used to analytically derive an expression for the subthreshold slope and threshold voltage. A drain current model for lightly doped symmetrical DG MOSFETs is then presented by considering weak and strong inversion regions including short channel effects, series source to drain resistance and channel length modulation parameters. These derived models are compared with the simulation results of the SILVACO (Atlas) tool for different channel lengths and silicon film thicknesses. Lastly, the effect of the fixed oxide charge on the drain current model has been studied through simulation. It is observed that the obtained analytical models of symmetrical double gate MOSFETs are in good agreement with the simulated results for a channel length to silicon film thickness ratio greater than or equal to 2.     

Propagation delay and power dissipation for different aspect ratio of single-walled carbon nanotube bundled TSV

Through-silicon vias (TSVs) have provided an attractive solution for three-dimensional (3D) integrated devices and circuit technologies with reduced parasitic losses and power dissipation, higher input-output (I/O) density and improved system performance. This paper investigates the propagation delay and average power dissipation of single-walled carbon nanotube bundled TSVs having different via radius and height. Depending on the physical configuration, a comprehensive and accurate analytical model of CNT bundled TSV is employed to represent the via (vertical interconnect access) line of a driver-TSV-load (DTL) system. The via radius and height are used to estimate the bundle aspect ratio (AR) and the cross-sectional area. For a fixed via height, the delay and the power dissipation are reduced up to 96.2% using a SWCNT bundled TSV with AR = 300 : 1 in comparison to AR = 6 : 1.     

Study of Temperature Dependence of Electrode–Glass Ceramic Interface Using Impedance Spectroscopy

The electrical behavior of strontium titanate borosilicate glass ceramics (SrO.TiO₂- 2SiO₂.B₂O₃) with additives K₂O, La₂O₃, CoO and Nb₂O₅ was studied by using Impedance Spectroscopy as a function of temperature and composition. An equivalent circuit model having three parallel RC's connected in series with a capacitor C₄ could represent the data well. By comparing the complex modulus plots with simulated ones and looking at the values of the time constants these RC's were attributed to represent crystalline, glassy and glass-crystal interface regions of the glass- ceramic whereas C₄ represented the glass-ceramic sample and contact electrode interface. When the glass ceramic sample contained only SrTiO₃ crystalline phase and the remaining glassy matrix, the interface capacitance showed an Arrhenius type of nature with an activation energy (0.11 ± 0.04) eV and when the glass- ceramic sample contained number of crystalline phases no clear cut trend appeared. These findings are useful in selecting suitable electrodes for applications as well as in deciding upon experimental techniques for measurement of dielectric constants of materials.     

Analysis of Fatty Acid and Lignan Composition of Indian Germplasm of Sesame to Evaluate Their Nutritional Merits

An attempt was made to individually analyze a germplasm collection of 54 indigenous Indian sesame cultivars for fatty acid and lignan composition of their seed oil by gas chromatography and high performance liquid chromatography, respectively. The entries varied in their fatty acid and lignan composition. The mean percentage contents of palmitic, stearic, oleic, linoleic and α‐linolenic acids ranged between 10–22, 5–10, 38–50, 18–43 and less than 1 whereas sesamol, sesamin and sesamolin scored between 3–37, 27–67, 20–59 of the total percentage of lignan, respectively. The highest percentage of α‐linolenic acid (ALA) was obtained in Var‐9 (1.3 % of the total fatty acids). Among the lignans, high sesamin content is considered to be significant, particularly in terms of long shelf life and nutraceutical value of sesame seed oil. The study has broadened our understanding related to differential biochemical composition of the rich sesame germplasms, thereby providing us with a useful groundwork for identifying potential targets and suitable cultivars for genetic engineering approaches to be undertaken in order to improve the nutritional quality of sesame oil, which in turn would be beneficial towards human health.