Electrospinning pure protein solutions in core–shell fibers

Electrospinning of protein‐loaded fibers faces many challenges, e.g. burst release owing to segregation of the protein on the fiber surface, loss of activity due to electrospinning conditions, limitation of loading capacity etc. Core–shell electrospinning provides an effective way to electrospin fibers wherein the core can be loaded with bioactive molecules in friendly conditions of a compatible polymer solution, thereby protecting the molecules from the electrostatic field and organic solvent of shell solutions. The shell polymer, after the electrospinning, acts as a barrier to control the release of the loaded molecules. However, the limitation of loading capacity still remains due the prerequisite of using an additional polymer as additive to achieve the minimum viscosity of the core solution required for viscous drag by the shell solution being drawn by the electrostatic force. The work reported here aims to alleviate the need of a polymer additive by using aqueous protein solutions of very high concentration. High concentrations of protein solutions were successfully electrospun as the core of the protein–poly(lactide‐co‐glycolic acid) core–shell fibers. A partitioning effect was seen in the controlled release of hydrophilic proteins as they were retained in the aqueous core for longer times. Using lysozyme as a model protein, it was shown that the activity is significantly retained after electrospinning, compared with electrospinning in monolithic fibers. Moreover, the lysozyme activity was also comparable with the lysozyme released from core–shell fibers spun using poly(vinyl acetate) as additive in the core. Copyright © 2012 Society of Chemical Industry     

Effect of diethyl ether blended with neem oil methyl esters in CI engine

Vegetable oils are now considered to be a potential alternative that can be used in place of partial or total substitution of diesel fuels. In this study, we used diethyl ether as an oxygenated additive to investigate the possible use of higher percentages of biodiesel in an unmodified diesel engine. Neem oil was selected for biodiesel production. The tests were performed at a steady-state condition in a single-cylinder constant speed DI diesel engine. The combustion process involved in diesel engine would be improved and the particulate matter would be reduced if these biodiesels are blended. An experimental investigation is carried out to establish the emission characteristics of a direct injection diesel engine using diethyl ether as additive in Neat Neem oil Biodiesel. Emissions of hydro carbon oxides of nitrogen and carbon monoxide significantly reduced by adding diethyl ether into neem oil biodiesel at 10% and 20% on volume basis.     

Green microalga Chlorella vulgaris as a potential feedstock for biodiesel

BACKGROUND: A major bottleneck in microalgal biodiesel production is lipid content, which is often low in microalgal species. The present study examines Chlorella vulgaris as a potential feedstock for biodiesel by identifying and evaluating the relationships between the critical variables that enhance the lipid yield, and characterizes the biodiesel produced for various properties. RESULTS: Factors affecting lipid accumulation in a green microalga, Chlorella vulgaris were examined. Multifactor optimization raised the lipid pool to 55% dry cell weight against 9% control. When C. vulgaris cells pre‐grown in glucose (0.7%)‐supplemented medium were transferred to the optimized condition at the second stage, the lipid yield was boosted to 1974 mg L^?1, a value almost 20‐fold higher than for the control. The transesterified C. vulgaris oil showed the presence of ～82% saturated fatty acids, with palmitate and stearate as major components, thus highlighting the oxidative stability of C. vulgaris biodiesel. The fuel properties (density, viscosity, acid value, iodine value, calorific value, cetane index, ash and water contents) are comparable with the international (ASTM and EN) and Indian (IS) biodiesel standards. CONCLUSION: C. vulgaris biomass with 55% lipid content and adequate fuel properties is potentially a renewable feedstock for biodiesel. Copyright © 2011 Society of Chemical Industry     

Variation in the volatile terpenoids of two industrially important basil (Ocimum basilicum L.) cultivars during plant ontogeny in two different cropping seasons from India

BACKGROUND: Two Ocimum basilicum cultivars, ‘Vikarsudha’ and ‘CIM‐Saumya’, grown in the Kumaon region of western Himalaya were evaluated for their essential oil yield and composition at different stages of plant growth during two distinct cropping seasons (spring–summer and rain–autumn). RESULTS: The highest yield of essential oil was obtained at full bloom stage in both cultivars in both cropping seasons. The essential oils obtained from different stages in two cropping seasons were analysed by capillary gas chromatography with flame ionisation detection, and gas chromatography–mass spectrometry. The major component of cultivar ‘Vikarsudha’ was methyl chavicol (84.3–94.3%), while for cultivar ‘CIM‐Saumya’ the main components were methyl chavicol (62.5–77.6%) and linalool (14.4–34.1%). CONCLUSION: This study clearly indicated that cultivar, cropping season, plant ontogeny and plant part had significant effects on the yield and quality of the essential oil of O. basilicum. Further, the amount of methyl chavicol in the cultivars grown in this region was higher than in cultivars from other parts of India. Copyright © 2011 Society of Chemical Industry     

Impulse Pressure Assisted Diffusion Bonding of Low Carbon Steel Using Silver Interlayer

In the present study, impulse pressure assisted diffusion bonding of low carbon steel was carried out using silver interlayer. To study the influence of input process parameters namely bonding temperature (T), maximum pulse pressure (P), and number of pulses (N), experiments of diffusion bonding were conducted according to the Taguchi L9 orthogonal array. To reveal the typical bond interface characteristics, selected samples were examined by scanning electron microscopy (FESEM) equipped with energy dispersive spectroscopy (EDS). The EDS analysis revealed a diffusion affected zone at the interface due to the diffusion of silver and iron across the interface. Lap joints were developed to measure the shear strength of the diffusion bonds. The optimum level of bonding temperature, maximum pulse pressure and number of pulses (875 °C, 10 MPa and 10 pulses) were identified. The ANOVA results indicated that bonding temperature had the highest statistical effect of 66.37% on shear strength followed by number of pulses and maximum pulse pressure. The fracture surface of the lap joints was also examined by FESEM and X-ray diffraction analysis.     

Motion analytics of zebrafish using fine motor kinematics and multi-view trajectory

Zebrafish is a useful animal model for studying human diseases such as muscle disorders. However, manual monitoring of fish motion is time-consuming and prone to subjective variations. In this paper, an automatic fish motion analytics framework is proposed. The proposed framework could be exploited to help validate zebrafish models of transgenic zebrafish that express human genes carrying mutations which lead to muscle disorders, thus affecting their ability to swim normally. To differentiate between wild-type (normal) and transgenic zebrafish, the proposed framework consists of two approaches to exploit discriminative spatial–temporal kinematic features which are extracted to represent zebrafish movements. First, the proposed approach studies precise quantitative measurements of motor movement abnormalities using a camera with the capability to record videos with high frames rates (up to 1,000 frames per second). This differs from previous works, which only tracked each fish as a single point over time. Second, the proposed approach studies multi-view spatial–temporal swimming trajectories. This differs from previous works which typically only considered single-view analysis of fish swimming trajectories. The proposed motion features are then incorporated into a supervised classification approach to identify abnormal fish movements. Experimental results have shown that the proposed approach is capable of differentiating between wild-type and transgenic zebrafish, thus helping to validate the zebrafish models.     

An efficient hybrid evolutionary heuristic using genetic algorithm and simulated annealing algorithm to solve machine loading problem in FMS

In this paper, a machine loading problem in a flexible manufacturing system (FMS) is discussed, with bi-criterion objectives of minimising system imbalance and maximising system throughput in the occurrence of technological constraints such as available machining time and tool slots. A mathematical model is used to select machines, assign operations and the required tools in order to minimise the system's imbalance while maximising the throughput. An efficient evolutionary algorithm by hybridising the genetic algorithm (GA) and simulated annealing (SA) algorithm called GASA is proposed in this paper. The performance of the GASA is tested by using 10 sample dataset and the results are compared with the heuristics reported in the literature. The influence of genetic operators on the evolutionary search in GASA is studied and reported. Two machine selection heuristics are proposed and their influence on the quality of the solution is also studied. Extensive computational experiments have been carried out to evaluate the performance of the proposed evolutionary heuristics and the results are presented in tables and figures. The results clearly support the better performance of GASA over the algorithms reported in the literature.     

Investigation of in vitro bone cell adhesion and proliferation on Ti using direct current stimulation

Our objective was to establish an in vitro cell culture protocol to improve bone cell attachment and proliferation on Ti substrate using direct current stimulation. For this purpose, a custom made electrical stimulator was developed and a varying range of direct currents, from 5 to 25 μA, was used to study the current stimulation effect on bone cells cultured on conducting Ti samples in vitro. Cell–material interaction was studied for a maximum of 5 days by culturing with human fetal osteoblast cells (hFOB). The direct current was applied in every 8 h time interval and the duration of electrical stimulation was kept constant at 15 min for all cases. In vitro results showed that direct current stimulation significantly favored bone cell attachment and proliferation in comparison to nonstimulated Ti surface. Immunochemistry and confocal microscopy results confirmed that the cell adhesion was most pronounced on 25 μA direct current stimulated Ti surfaces as hFOB cells expressed higher vinculin protein with increasing amount of direct current. Furthermore, MTT assay results established that cells grew 30% higher in number under 25 μA electrical stimulation as compared to nonstimulated Ti surface after 5 days of culture period. In this work we have successfully established a simple and cost effective in vitro protocol offering easy and rapid analysis of bone cell–material interaction which can be used in promotion of bone cell attachment and growth on Ti substrate using direct current electrical stimulation in an in vitro model.