Dynamic S-Box Generation Using Novel Chaotic Map with Nonlinearity Tweaking

A substitution box (S-Box) is a crucial component of contemporary cryptosystems that provide data protection in block ciphers. At the moment, chaotic maps are being created and extensively used to generate these S-Boxes as a chaotic map assists in providing disorder and resistance to combat cryptanalytical attempts. In this paper, the construction of a dynamic S-Box using a cipher key is proposed using a novel chaotic map and an innovative tweaking approach. The projected chaotic map and the proposed tweak approach are presented for the first time and the use of parameters in their working makes both of these dynamic in nature. The tweak approach employs cubic polynomials while permuting the values of an initial S-Box to enhance its cryptographic fort. Values of the parameters are provided using the cipher key and a small variation in values of these parameters results in a completely different unique S-Box. Comparative analysis and exploration confirmed that the projected chaotic map exhibits a significant amount of chaotic complexity. The security assessment in terms of bijectivity, nonlinearity, bits independence, strict avalanche, linear approximation probability, and differential probability criteria are utilized to critically investigate the effectiveness of the proposed S-Box against several assaults. The proposed S-Box’s cryptographic performance is comparable to those of recently projected S-Boxes for its adaption in real-world security applications. The comparative scrutiny pacifies the genuine potential of the proposed S-Box in terms of its applicability for data security.     

Biodiesel from mutton fat using KOH impregnated MgO as heterogeneous catalysts

The use of MgO impregnated with KOH as heterogeneous catalysts for the transesterification of mutton fat with methanol has been evaluated. The mutton fat (fat) with methanol (1:22 M ratio) at 65 °C showed > 98% conversion to biodiesel with 4 wt% of MgO–KOH-20¹ (MgO impregnated with 20 wt% of KOH) in 20 min. The reaction conditions optimized were; the amount of KOH impregnation (5–20 wt%), the amount of catalyst (1.5–4 wt%, catalyst/fat), the reaction temperature (45–65 °C), fat to methanol molar ratio (1:11–1:22) and the effect of addition of water/oleic acid/palmitic acid (upto 1 wt%). Although, transesterification of fresh fat (moisture content 0.02 wt% and free fatty acids 0.002 wt%) with methanol in the presence of KOH (homogenous catalyst) resulted in the complete conversion to biodiesel, but in the presence of additional 1 wt% of either free fatty acid or moisture content, formation of soap was observed. The MgO–KOH-20 catalyst was found to tolerate additional 1 wt% of either the moisture or FFAs in the fat.     

One‐Pot Lipase Entrapment Within Silica Particles to Prepare a Stable and Reusable Biocatalyst for Transesterification

In order to enhance the reusability, Rhizomucor miehei lipase was entrapped in a single step within silica particles having an oleic acid core (RML@SiO₂). Characterization of RML@SiO₂ by scanning and transmission electron microscopy and Fourier transform infrared studies supported the lipase immobilization within silica particles. The immobilized enzyme was employed for transesterification of cottonseed oil with methanol and ethanol. Under the optimum reaction conditions of a methanol‐to‐oil molar ratio of 12:1 or ethanol‐to‐oil molar ratio of 15:1, stirring speed of 250 revolutions/min (flask radius = 3 cm), reaction temperature of 40 °C, and biocatalyst concentration of 5 wt% (with respect to oil), more than 98 % alkyl ester yield was achieved in 16 and 24 h of reaction duration in case of methanolysis and ethanolysis, respectively. The immobilized enzyme did not require any buffer solution or organic solvent for optimum activity; hence, the produced biodiesel and glycerol were free from metal ion or organic molecule contamination. The activation energies for the immobilized enzyme‐catalyzed ethanolysis and methanolysis were found to be 34.9 ± 1.6 and 19.7 ± 1.8 kJ mol^?1, respectively. The immobilized enzyme was recovered from the reaction mixture and reused in 12 successive runs without significant loss of activity. Additionally, RML@SiO₂ demonstrated better reusability as well as stability in comparison to the native enzyme as the former did not lose the activity even upon storage at room temperature (25–30 °C) over an 8‐month period.     

Environmentally Sustainable Construction: Knowledge and Learning in London Planning Departments

Environmentally sustainable construction is now recognised as a significant element of the broader sustainable development agenda and planners are being called upon to play a role in delivering more sustainable patterns of construction and development. This puts particular demands on the knowledge resources of planners since knowledge is implicated in the power relations between planners and developers. This paper examines the interrelationship between knowledge of environmentally sustainable construction and practice in planning departments. Drawing on a survey of and interviews with planners in London, it discusses the construction of knowledge within the dynamics of planning organisations and the potential for learning to promote a more sustainable built environment. Wenger's concept of communities of practice frames the analysis, alongside consideration of the translation of knowledge into bureaucratic and usable forms and the role of knowledge brokers in this process.     

Variation in patient dose due to differences in calibration and dosimetry protocols

For precise and accurate patient dose delivery,the dosimetry system must be calibrated properly according to the recommendations of standard dosimetry protocols such as TG-51 and TRS-398. However, the dosimetry protocol followed by a calibration laboratory is usually different from the protocols that are followed by different clinics, which may result in variations in the patient dose.Our prime objective in this study was to investigate the effect of the two protocols on dosimetry measurements.Dose measurements were performed for a Co-60 teletherapy unit and a high-energy Varian linear accelerator with 6 and 15 MV photon and 6, 9, 12, and 15 MeV electron beams, following the recommendations and procedures of the AAPM TG-51 and IAEA TRS-398 dosimetry protocols. The dosimetry systems used for this study were calibrated in a Co-60 radiation beam at the Secondary Standard Dosimetry Laboratory(SSDL) PINSTECH,Pakistan, following the IAEA TRS-398 protocol. The ratio of the measured absorbed doses to water in clinical setting,D_w(TG-51/TRS-398), was 0.999 and 0.997 for 6 and15 MV photon beams,whereas these ratios were 1.013,1.009, 1.003, and 1.000 for 6, 9, 12, and 15 MeV electron beams, respectively. This difference in the absorbed dosesto-water D_w ratio may be attributed mainly due to beam quality(K_Q) and ion recombination correction factor.     

Preparation and characterization of starch-based composite films reinforced by apricot and walnut shells

Starch-based biodegradable films were prepared by using solution-casting method and reinforced by agricultural residues [apricot and walnut shell (APS and WNS) powder]. The powder of both shells was added in different ratios (0, 2.5, 5, 7.5, and 10%) to investigate the microstructures and performances (mechanical and thermal properties) of the starch-based film. Different techniques such as impact, tensile testing, scanning electron microscope, optical microscope (OM), X-ray diffraction (XRD), water vapor transmission rate (WVTR), and dynamic mechanical analysis were applied to study the thermomechanical and barrier properties of the composite films. Results showed that the incorporation of both shells significantly improved the WVTR and mechanical properties of starch-based films. The shells powder was significantly increased the Young's modulus and tensile strength of the starch-based films. Both OM and SEM results showed reasonably good compatibility between starch and reinforced shells. OM and XRD indicated that the APS and WNS not only retained their crystalline structure in the film but they also strengthened the peak intensity of the film. This phenomenon can be used to explain the mechanism of mechanical reinforcement. Since all the components used in the preparation of the films are food grade ingredients, it is expected that the films developed in this work will be used for food packaging applications. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47978.     

Plasmodium species aware based quantification of malaria parasitemia in light microscopy thin blood smear

Malaria is a serious worldwide disease, caused by a bite of a female Anopheles mosquito. The parasite transferred into complex life round in which it is grown and reproduces into the human body. The detection and recognition of Plasmodium species are possible and efficient through a process called staining (Giemsa). The staining process slightly colorizes the red blood cells (RBCs) but highlights Plasmodium parasites, white blood cells and artifacts. Giemsa stains nuclei, chromatin in blue tone and RBCs in pink color. It has been reported in numerous studies that manual microscopy is not a trustworthy screening technique when performed by nonexperts. Malaria parasites host in RBCs when it enters the bloodstream. This paper presents segmentation of Plasmodium parasite from the thin blood smear points on region growing and dynamic convolution based filtering algorithm. After segmentation, malaria parasite classified into four Plasmodium species: Plasmodium falciparum, Plasmodium ovale, Plasmodium vivax, and Plasmodium malaria. The random forest and K‐nearest neighbor are used for classification base on local binary pattern and hue saturation value features. The sensitivity for malaria parasitemia (MP) is 96.75% on training and testing of the proposed approach while specificity is 94.59%. Beside these, the comparisons of the two features are added to the proposed work for classification having sensitivity is 83.60% while having specificity is 94.90% through random forest classifier based on local binary pattern feature.     

Numerical Simulation of Metal Melt Flow in a One-Strand Tundish Regarding Active Filtration and Reactive Cleaning

Metallurgical and Materials Transactions B - In the paper, two different cleaning strategies for nonmetallic inclusions in steel melts, active filtration and reactive cleaning, are examined in a...     

Microscopic melanoma detection and classification: A framework of pixel‐based fusion and multilevel features reduction

The numbers of diagnosed patients by melanoma are drastic and contribute more deaths annually among young peoples. An approximately 192,310 new cases of skin cancer are diagnosed in 2019, which shows the importance of automated systems for the diagnosis process. Accordingly, this article presents an automated method for skin lesions detection and recognition using pixel‐based seed segmented images fusion and multilevel features reduction. The proposed method involves four key steps: (a) mean‐based function is implemented and fed input to top‐hat and bottom‐hat filters which later fused for contrast stretching, (b) seed region growing and graph‐cut method‐based lesion segmentation and fused both segmented lesions through pixel‐based fusion, (c) multilevel features such as histogram oriented gradient (HOG), speeded up robust features (SURF), and color are extracted and simple concatenation is performed, and (d) finally variance precise entropy‐based features reduction and classification through SVM via cubic kernel function. Two different experiments are performed for the evaluation of this method. The segmentation performance is evaluated on PH2, ISBI2016, and ISIC2017 with an accuracy of 95.86, 94.79, and 94.92%, respectively. The classification performance is evaluated on PH2 and ISBI2016 dataset with an accuracy of 98.20 and 95.42%, respectively. The results of the proposed automated systems are outstanding as compared to the current techniques reported in state of art, which demonstrate the validity of the proposed method.