On the improvement of network resource utilization efficiency for the establishment of static dependable connections in SRLG-constrained WDM translucent networks

In this paper, we investigate the problem of establishing static connections with fault-tolerant requirements, also known as dependable connections, taking into account quality of transmission constraints. To the best of our knowledge, this is the first study that tackles the aforementioned problem under shared risk link group (SRLG) constraints in translucent WDM optical mesh networks where typically a set of strategically localized network nodes are equipped with regeneration capability to overcome physical-layer impairment effects. A novel cross-layer heuristic approach is introduced to solve the problem for an heterogeneous networked scenario relying on a cost-effective two-stage protection procedure which combines the well-known path protection and partial path protection schemes in order to ensure instantaneous recovery from any SRLG-failure event. The proposed heuristic integrates a generic auxiliary graph model that incorporates various network heterogeneity factors such as the number of transceivers at each network node, the number of wavelengths on each fiber link, and the regeneration capability of each node, represented by different edges in the constructed graph. Moreover, the integrated auxiliary graph can be applied efficiently to model either single- or mixed-line-rate translucent WDM optical networks wherein different modulation formats are employed in order to support the transmission at different line rates. Our solution approach aims at maximizing the total number of accommodated requests by reducing network resource consumption through the simultaneous use of the backup–backup and primary–backup multiplexing techniques. We, here, present extended versions of these two techniques that generalize the sharing concept to some other important node resources—specifically, regeneration equipments which constitute the major cost factor in optical transport networks—in addition to link resources (i.e., wavelength channels). As far as we know, this is the first attempt to deploy simultaneously generalized versions of the backup–backup and primary–backup multiplexing techniques when considering static traffic patterns without compromising the 100 % fault-recoverability guarantee. The performances of the proposed heuristic are evaluated and discussed through extensive numerical experiments carried out on different network topologies. Significant improvements are demonstrated, either in terms of network blocking performance or in terms of resource utilization efficiency, in comparison with previously proposed approaches.     

Enhanced Bioavailability of Eicosapentaenoic Acid from Fish Oil After Encapsulation Within Plant Spore Exines as Microcapsules

Benefits of eicosapentaenoic acid (EPA) can be enhanced by raising their bioavailability through microencapsulation. Pollen can be emptied to form hollow shells, known as exines, and then used to encapsulate material, such as oils in a dry powder form. Six healthy volunteers ingested 4.6 g of fish oil containing 20% EPA in the form of ethyl ester first alone and then as 1:1 microencapsulated powder of exines and fish oil. Serum bioavailability of EPA was measured by area under curve (AUC_0–24). The mean AUC_0–24 of EPA from ethyl ester with exine (M = 19.7, SD = 4.3) was significantly higher than ethyl ester without exines (M = 2, SD = 1.4, p < 0.01).The bioavailability of EPA is enhanced by encapsulation by pollen exines.     

Factorial design of experiment (DOE) for parametric exergetic investigation of a steam methane reforming process for hydrogen production

Hydrogen is expected to play a significant role in future energy systems. The efficient production of hydrogen at a minimum cost and in an environmentally acceptable manner is crucial for the development of a hydrogen-including economy. The exergy analysis is a powerful tool to quantify sustainable development potential. An important aspect of sustainable development is minimizing irreversibility. The purpose of this study is to perform the exergy analysis of a steam methane reforming (SMR) process for hydrogen production. As a first step, an exergy analysis of an existing process is shown to be an efficient tool to critically examine the process energy use and to test for possible savings in primary energy consumption. The results of this investigation prove that the exergetic efficiency of the SMR process is 65.47%, and the majority of destroyed exergy is localized in the reformer with a 65.81% contribution to the whole process destroyed exergy. Next, an exergetic parametric study of the SMR has been carried out with a factorial design of experiment (DOE) method. The influence of the reformer operating temperature and pressure and of the steam to carbon ratio (S/C) on the process exergetic efficiency has been studied. A second-order polynomial mathematical model has been obtained through correlating the exergetic efficiencies with the reformer operating parameters. The results of this study show that the rational choice of these parameters can improve the process exergetic performance.     

Flexible and Autonomous Integrated System for Characterizing Metal Oxide Gas Sensor Response in Dynamic Environment

Characterization and calibration of gas sensor is a complex problem due to the dynamic behavior of gases and the limitations of current technology. This article reports a flexible, robust, and autonomous integrated system that is able to perform characterization on metal oxide-based gas sensors in dynamic environments. The system controls the concentration and flow of the relevant gases into the gas chamber and simultaneously measuring the sensor response. This feature allows the characterization of the sensor under continuous dynamic flow of gases similar to conditions on a robot or flow pipes. Several experiments have been performed on the system using hydrogen sulfide. The results provide information on the general characteristics of the sensor as well as its sensitivity. The noise levels were studied with different reference voltages. Overall, the results verify that the system is reliable and able to produce repeatable measurements.     

Laparoscopy for the impalpable testes. Initial experience of one center

Endoscopic treatment of acute pancreatitis has been proposed in different conditions: acute biliary pancreatitis, pancreatitis related to pancreas divisum or in case of pseudocysts. The efficacy of such endoscopic procedure is discussed.     

A tool to minimize the time costs of parallel computations through optimal processing power allocation

In this paper, we present a software system, OPAS (Optimal Allocation System), that incorporates the optimal allocation policy in the analysis of the time-cost behaviour of parallel computations. OPAS assumes that the underlying system which supports the executions of parallel computations has a finite number of processors, that all the processors have the same speed and that the communication is achieved through a shared memory. OPAS defines the time cost as a function of the input, the algorithm, the data structure, the processor speed, the number of processors and the processing power allocation. In analysing the time cost of a computation, OPAS first uses the optimal allocation policy that we developed previously to determine the amount of processing power each node receives and then derives the computation's time cost. OPAS can evaluate different time-cost behaviours, such as the minimum time cost, the maximum time cost, the average time cost and the time-cost variance. It can also determine the speed-up and efficiency, and plot the time-cost curve and time-cost distribution.     

Electrical properties of TeAsGe films

The effect of temperature T, electrode separation d and substrate temperature T_s on the I–V characteristics of amorphous films 3500 Å thick, vapour deposited from the alloy TeAsGe (53:36:11 at. %) onto a glass substrate at room temperature, were investigated. The material displayed the behaviour of a negative resistance device with a memory. The behaviour for T=constant is described by the relation V = CIexp (?αI), where C and α are constants for a specimen at constant temperature. The threshold voltage at which the off state transforms to the negative resistance state decreased with T according to the relation V_th = V₀exp (E_v/2 kT), where E_v = 0.21 eV. V_th increased with d and decreased with T_s and was related to changes in resistance and structure. Microscope examination showed the formation of filaments containing recrystalized structure arising from Joule heating.     

Ethylene glycol poisoning with a normal anion gap caused by concurrent ethanol ingestion: importance of the osmolal gap

Ethylene glycol poisoning classically presents as a metabolic acidosis with an increased anion gap. Metabolism of ethylene glycol to organic acids, and increased production of lactate, are responsible for the increased gap. We report the case of an alcohol user who consumed ethanol and ethylene glycol concurrently, and presented without acidosis, with a normal anion gap. Several hours later, when his serum ethanol level had declined, he developed severe acidosis with an elevated anion gap. An increased osmolal gap, not accounted for by the serum ethanol level, proved to be an important clue to the diagnosis. In this patient, ingestion of ethanol inhibited the hepatic metabolism of ethylene glycol to organic acids, obscuring the diagnosis. In intoxicated alcohol users, even in the absence of metabolic acidosis, serum osmolality measurements and calculation of the osmolal gap may facilitate the rapid diagnosis of ethylene glycol poisoning.     

A comparative analysis of hardware and software fault tolerance: Impact on software reliability engineering

Today's digital systems are growing increasingly complex, and are being used in increasingly critical functions. The first premise makes them more prone to contain faults, and the second premise makes their failure less tolerable. This widening gap highlights the need for fault tolerant techniques, which make provisions for reliable operation of digital systems despite the presence and occasional manifestation of faults. In this paper we present a brief comparative survey of fault tolerance as it arises in hardware systems and software systems. We discuss logical models as well as statistical models of fault tolerance, and use these models to analyze design tradeoffs of fault tolerant systems. This revised version was published online in June 2006 with corrections to the Cover Date.     

Discrimination des modes pour l’étude des discontinuités dans les circuits planaires

The study of the dispersion phenomena of a planar transmission line in boxed structure is very intricate. In this paper we will try to determine the origin of the different modes by varying the geometrical parameters of the structure at a given frequency. We will also study the complex modes and their effects on thee characterisation of the planar discontinuities.