氧气放电辅助激光淀积原位制备高T_c超导薄膜

采用低压氧气放电辅助的激光淀积方法,原位外延生长出零电阻温度91K,临界电流密度10~5A/cm~2的Y-Ba-Cu-O高温超导薄膜。扫描电镜和X光衍射分析结果表明,薄膜中超导相晶粒的生长具有c轴垂直于表面的择优取向。     

发射极δ掺杂的InGaAs/InPDHBT的特性分析

设计了一种新结构的InGaAs/InP双异质结晶体管(DHBT),其中发射结采用δ掺杂和阻挡层结构,集电极采用N+掺杂复合结结构.考虑隧穿作用和发射结空间电荷区复合电流的影响,计算了δ掺杂浓度和N+、n-层厚度等参数变化对InGaAs/InP DHBT电流、I-V输出特性、电流增益的影响,计算结果表明,随着这些参数值增大,InGaAs/InP DHBT输出特性逐渐改善.当δ掺杂浓度大于2×1012cm-3时,电流增益趋于饱和.     

纸张用有机硅抗水剂的制备

采用氨基硅油、十二烷基三甲氧基硅烷、甲基三乙氧基硅烷配成11种抗水剂,用于纸张的抗水处理.通过渗透法和接触角法测试发现,有机硅抗水剂对实验选择的9种纸张均有明显的抗水效果;其中采用氨基硅油配制的抗水剂效果最好,经其处理的生宣纸与空白样相比,接触角由完全润湿提高到125°,渗透时间由0提高到18 s.最佳应用工艺为:将氨基硅油配制成质量分数为2.041%的甲苯溶液,按照10g/m2的涂布量喷涂于纸张表面,自然晾干3～5天至恒定质量.     

中山古镇风韵独具

特殊的自然地理环境和社会、经济、文化的影响,形成了重庆市江津中山镇鲜明的地域文化特色,这些特色突出地表现在城镇形态格局、街巷空间布局、建筑空间开合等方面。本文对此进行了深入的研究。     

Comparative study of the elimination of toluene vapours in twin biotrickling filters using two microorganisms Bacillus cereus S1 and S2

BACKGROUND: To investigate the microbial degradation performance of organic pollutants in the atmosphere using a biotrickling filter, two microorganism strains, Bacillus cereus S1 and Bacillus cereus S2, were selected, identified and inoculated into a twin biotrickling filter for comparison. RESULTS: Both strains showed good performance towards the degradation of model organic pollutants when gas flow rates ranged from 100 to 600 L h⁻¹. For S1, the total maximum removal efficiency (RE) of toluene was maintained nearly 100% not only at gas flow rates of 100 L h⁻¹ corresponding to empty bed residence time (EBRT) 199.44 s, but also at gas flow rates of 200 L h⁻¹ (EBRT = 99.72 s) and 300 L h⁻¹ (EBRT = 66.48 s). However, S2 had a much lower degradation capability; near 100% removal efficiency was obtained only at the gas flow rate of 100 L h⁻¹ although both bacteria belong to the same Bacillus cereus. With further increase in gas flow rate, the total REs for both S1 and S2 decreased slightly at first and then dropped sharply to 46% and 35%, respectively, at an EBRT of 33.24 s, corresponding to a gas flow rate of 600 L h⁻¹. Starvation for between 2 and 10 days resulted in the re‐acclimation times of both strains ranging between 1.0 and 15.5 h. CONCLUSION: Strain S1 would be a better choice for inoculation into a biotrickling filter than strain S2, because of its much higher toluene removal capacity and rapid recovery to full performance. Copyright © 2008 Society of Chemical Industry     

CX6112车铣复合机床设计方案的研究与探讨

文章较系统地论述了车铣复合机床设计方案的形成过程，同时分析了该设计方案的持点，并简要介绍了该产品的主要技术参数和用途，简评了该产品的技术水平。     

FFFIS编解码算法与实现

在对FFFIS(Form Fit Function Interface Specification)的Eurobalise报文特点进行简单介绍的基础上,对其编解码算法进行了探讨,并根据FFFIS标准提出了高速算法以及系统软硬件实现方案,最后对其应用进行了简单介绍。     

Reduction of triceps muscle force after shortening of the distal humerus: a computational model

A retrospective case reference study examining the use of alcohol and tobacco in 303 women aged 40 or over suffering from oral or oropharyngeal cancer was conducted in the south-west Netherlands. Both alcohol and tobacco consumption are important in the development of oral and oropharyngeal cancer with increased consumption of both markedly increasing the risks of cancer, but alcohol having the greater effect.     

关系数据库在专家系统中的应用

在传统的专家系统中，对推理机工作过程的控制是程序实现的。本文介绍了一个用数据库技术引导推理过程的专家系统－精神分裂症诊断专家系统（ＥＳＳＤ）的推理控制策略。在这个专家系统中，作者将有关推理过程的控制信息用关系数据库技术进行存储和管理，达到了将控制策略数据化的目的。将数据库技术引入到专家系统的推进控制机制中可以使控制策略比较容易调整，且而可以大大压缩程序篇幅，显著提高系统运行效率，为专家系统的结构设     

立管系统中严重段塞流的一维瞬态模型

严重段塞流主要出现在下倾管段、紧接有一上倾管段或立管段的气、液两相混输海底管道中。根据严重段塞流形成的4个阶段,从一维瞬态流体力学方程出发,建立了一个简化的、准平衡态的严重段塞流数学模型,该模型考虑了流体的物性及流动瞬态效应,可对严重段塞长度、段塞周期、流动速度、压力等特性参数的变化进行模拟。与其他瞬态多相流模型相比,本文模型具有数学模型简单、计算效率高的特点。数值模拟结果表明:当管径较小时,无论介质是空气和水,还是空气和油,由本文模型计算得到的段塞周期和压力结果都与实验数据吻合较好;当管径较大时,若介质为空气和水,则本文模型计算结果与OLGA软件模拟结果较接近;若介质为石油和天然气,在模拟工况范围内,除了小气量工况下偏差较大外,本文模型计算结果与OLGA软件模拟结果相比,段塞周期偏差在25%以内,压力偏差在10%以内;此外,用本文模型计算液塞生长阶段时间t1比Saga-tun模型模拟结果更接近实测结果。