Influence of acceleration setting reaction by halogen light‐curing on GIC–dentin interface: Qualitative analysis by SEM

The aim of this study was to evaluate by scanning electron microscope (SEM) photomicrographs the influence of application of halogen light‐curing for fastening the set reaction of high‐viscosity glass ionomer cements (GIC) by assessing the material/dentin interface. Twelve human primary canines were assigned in four groups (n = 3) according to the GIC (Fuji IX, GC or Maxxion R, FGM) and application of halogen light‐curing (60 sec or control—no external energy). Blocks with approximately 6 mm of height were buildup on previously pre‐treated dentin surface in according to the experimental group. After storage at 37 °C, 100% humidity for 48 h, the specimens were then sectioned in slices with 1‐mm thick. The slices were qualitative analyzed using SEM to evaluate possible structural changes. Two examiners independently evaluated the images in order to observe the spherical hollow spaces of each tooth. The photomicrographs revealed the presence of spherical hollow spaces in all experimental groups. However, in both groups that received halogen light‐curing application, it was possible to observe that the presence of these hollow spaces decreased in size and quantity. It can be concluded that the halogen light‐curing application positively decreases in size and quantity in the presence of spherical hollow spaces in GIC.     

Macroscopic and microscopic analysis of the tongue of the common opossum (Didelphis marsupialis)

We performed a macroscopic and microscopic study of the tongues of common opossums, Didelphis marsupialis, from South America. We studied two males and two females. We collected morphometric data on the tongue with precision calipers. For the light microscopy and scanning electron microscopy analyses, we fixed tissue fragments in 10% formaldehyde and 2.5% glutaraldehyde, respectively. The opossum tongues averaged 5.87 ± 0.20 cm in length, 3.27 ± 0.15 cm in width at the lingual body, and 3.82 ± 0.15 cm in width at the root. The mean thickness of the lingual body was 1.8 ± 0.1 cm, and the thickness of the root was 3.82 ± 0.15 cm. Sharp filiform papillae were scattered across the entire tongue; conical filiform papillae occurred on the lingual body and tongue tip; fungiform papillae were scattered among the filiform papillae on the lingual body and tongue tip; and there were three vallate papillae at the root of the tongue. We found two strands of papillary projections in the tongue root. Despite the low variability observed in the lingual papillae, the morphological data obtained in this study may be related to the opossum's diverse food habits and the extensive geographic distribution of the species throughout America. Microsc. Res. Tech. 2012. © 2012 Wiley Periodicals, Inc.     

Inhibition of potato cyst nematode hatch by lignans fromBupleurum salicifolium (Unbelliferae)

A series of lignans fromBupleurum salicifolium Soland (Umbelliferae) were tested for nematostatic activity on the cysts and freed secondstage juveniles of the potato cyst nematodesGlobodera rostochiensis andG. pallida. None of the six lignans tested—bursehernin, matairesinol, syringaresinol, the novel product buplerol, guayarol, and a derivative, nortrachelogenin triacetate—showed nematicidal activity in an in vitro analysis with second-stage juveniles, but significant differences were noted when the lignans were assayed for nematostatic activity as cyst hatching inhibitors. Bursehernin and matairesinol showed the greatest activity, at concentrations of 50 ppm. This is the first known instance of a natural product inhibiting the hatch of the nematodeG. pallida. The HID (hatching inhibiting dose) of bursehernin was estimated, and some conclusions were drawn about the structure-activity relationships of the lignans under study.     

Polymerisation of styrene using Y, USY and β zeolites as catalysts

The homopolymerisation of styrene is studied in the presence of Y, USY and beta zeolites. High molecular weight polymers, in the range 0.7 × 10⁶–1 × 10⁶, are obtained in good yields. The activity of zeolite beta is only slightly increased by calcination of the as-synthesised material, pointing to an important role of the zeolite outer surface. The influence of the catalyst acidity upon the polymer molecular weight is evaluated by the use of dealuminated zeolites. This revised version was published online in July 2006 with corrections to the Cover Date.     

Analysis of the interfacial micromorphology of adhesive systems in cavities prepared with Er,Cr:YSGG, Er:YAG laser and bur

The purpose of this in vitro study was to evaluate the interaction pattern of adhesive systems on laser and bur cavities. Cavities were prepared according to the following groups (n=9): (G1) conventional diamond bur (No. 1013); (G2) Er:YAG laser (250 mJ, 4 Hz, 80.6 J/cm2); (G3) Er,Cr:YSGG laser (3.5 W, 20 Hz, 61.7 J/cm2). After cavity preparation, specimens were divided into three subgroups differing the adhesive systems used (n=3): (GA) AdheSE; (GB) Clearfil standard error (SE) Bond; (GC) Single Bond. After insertion of a micro-hybrid composite resin, the specimens were sectioned across the bonded surface dividing the teeth into two halves, which were prepared for SEM analysis. Cavities prepared with laser appeared to be more irregular than the bur cavities. Different patterns of gap formation and resin tags could be observed, showing the differences, advantages, and disadvantages of both types of cavities. Under the settings of the present study, resin tags were more pronounced in lased dentin than bur prepared dentin independently of the bonding systems used. On the other hand gap formation between dentin and resin in laser prepared cavities was observed suggesting collagen alteration.     

Degradation of the antibiotic amoxicillin by photo-Fenton process--chemical and toxicological assessment

The influence of iron species on amoxicillin (AMX) degradation, intermediate products generated and toxicity during the photo-Fenton process using a solar simulator were evaluated in this work. The AMX degradation was favored in the presence of the potassium ferrioxalate complex (FeOx) when compared to FeSO₄. Total oxidation of AMX in the presence of FeOx was obtained after 5 min, while 15 min were necessary using FeSO₄. The results obtained with Daphnia magna biossays showed that the toxicity decreased from 65 to 5% after 90 min of irradiation in the presence of FeSO₄. However, it increased again to a maximum of 100% after 150 min, what indicates the generation of more toxic intermediates than AMX, reaching 45% after 240 min. However, using FeOx, the inhibition of mobility varied between 100 and 70% during treatment, probably due to the presence of oxalate, which is toxic to the neonates. After 240 min, between 73 and 81% TOC removal was observed. Different pathways of AMX degradation were suggested including the opening of the four-membered β-lactamic ring and further oxidations of the methyl group to aldehyde and/or hydroxylation of the benzoic ring, generating other intermediates after bound cleavage between different atoms and further oxidation to carboxylates such acetate, oxalate and propionate, besides the generation of nitrate and ammonium.     

Kinetics of nitrate and perchlorate removal and biofilm stratification in an ion exchange membrane bioreactor

The biological degradation of nitrate and perchlorate was investigated in an ion exchange membrane bioreactor (IEMB) using a mixed anoxic microbial culture and ethanol as the carbon source. In this process, a membrane-supported biofilm reduces nitrate and perchlorate delivered through an anion exchange membrane from a polluted water stream, containing 60 mg/L of NO₃⁻ and 100 μg/L of ClO₄⁻. Under ammonia limiting conditions, the perchlorate reduction rate decreased by 10%, whereas the nitrate reduction rate was unaffected. Though nitrate and perchlorate accumulated in the bioreactor, their concentrations in the treated water (2.8 ± 0.5 mg/L of NO₃⁻ and 7.0 ± 0.8 μg/L of ClO₄⁻, respectively) were always below the drinking water regulatory levels, due to Donnan dialysis control of the ionic transport in the system.Kinetic parameters determined for the mixed microbial culture in suspension showed that the nitrate reduction rate was 35 times higher than the maximum perchlorate reduction rate. It was found that perchlorate reduction was inhibited by nitrate, since after nitrate depletion perchlorate reduction rate increased by 77%. The biofilm developed in the IEMB was cryosectioned and the microbial population was analyzed by fluorescence in situ hybridization (FISH). The results obtained seem to indicate that the kinetic advantage of nitrate reduction favored accumulation of denitrifiers near the membrane, whereas per(chlorate) reducing bacteria were mainly positioned at the biofilm outer surface, contacting the biomedium. As a consequence of the biofilm stratification, the reduction of perchlorate and nitrate occur sequentially in space allowing for the removal of both ions in the IEMB.     

Environmental Open Data in Urban Platforms: An Approach to the Big Data Life Cycle

ABSTRACT

Through a literature review, this paper proposes an assessment framework to evaluate environmental open data in urban platforms under the data life cycle approach. For this purpose, a set of quantitative and qualitative indicators has been defined for each of the stages of the data life cycle: acquisition, access, analysis, and application. As confirmation of the capabilities of this approach, we illustrate the results of its application in six data portals along with analyses, comparisons, and conclusions regarding the results. The cases reveal that an interest exists in providing environmental information, but the capability to transform the data information into knowledge relevant for cities is rather low.     

Metal profiles used as environmental markers of green turtle (Chelonia mydas) foraging resources

The Baja California Peninsula, Mexico serves an important role for feeding and developing sea turtles. High concentrations of metals detected in green turtles (Chelonia mydas) from Magdalena Bay prompted an investigation into the sources of metals in the region. We compared metal concentrations in sea turtle tissues with plant species found in their stomach contents, and with the same species of plants collected inside a sea turtle refuge area known as Estero Banderitas. Differences in the metal concentrations between marine plant species were minimal. Principal components analysis of the percent contribution of individual metals to the overall metal signature of each plant or tissue sample generated three principal components that explained 80.7% of the total variance in the data. The plant samples collected within Estero Banderitas formed a separate grouping from the green turtle tissue samples and the plants from the stomach contents. The plants in the stomach contents contained greater percent contributions of Cd and Zn than the plants collected inside the bay, while Pb and Mn contributed more to the metal profiles in the bay samples. The metal profiles in the sea turtle tissues more closely resembled the stomach contents than the same species of plants collected within Estero Banderitas, and suggest that sea turtles collected inside Magdalena Bay use foraging resources outside of the Estero Banderitas region. This work supports the suggestion that metal profiles can be used as "environmentally acquired markers" to improve our understanding of the extent of sea turtle foraging areas.     

Morphological description of the immature stages of Hermetia illucens (Linnaeus, 1758) (Diptera: Stratiomyidae)

In the dipteran genus Hermetia, only 6 of the 78 valid species have documented immature stages: H. albitarsis Fabricius, 1805, H. aurata Bellardi, 1859, H. concinna Williston, 1900, H. illucens (Linnaeus, 1758), H. panamensis Greene, 1940 and H. pulchra Weidemann, 1830. In particular, H. illucens stands out due to its reported applicability for forensic, medical and economic purposes. Here, we described the morphology of eggs and immature stages of this species, with a view to detecting differences between instars and in the pupal stage, which should eventually help properly identifying larval age. We utilized both optical and scanning electron microscopy tools. The eggs are elliptical and elongated, and color varies from cream white to yellowish. The larvae are apodal, hemichephalic and holopneustic, flattened dorso‐ventrally and may be recognized by the head elongated, dorsal and ventral chaetotaxy of the cephalic capsule, thoracic and abdominal segments, and the morphology of the anterior and posterior spiracles. The pupae are adecticous and coarctate, tegument dark brown and pruinescence varying from brown to golden. The overall morphology across instars is similar, but marked variations were observed in the shape of the antennal articuli and the shape of the setae (first instar compared to the others). Our results supplement the biological information on Hermetia illucens and should aid the proper identification and aging of juveniles in the field, as a way to minimize errors in the calculation of the post‐mortem interval.