Transient measurements of adsorption and diffusion in H-ZSM-5 membranes

A transient permeation method presented here not only determines the adsorption and diffusion properties of the pores that are the transport pathways through zeolite membranes, but nondestructively estimates the effective thickness of the membrane. Transient responses of the permeate concentration to step changes in the feed were measured on two H-ZSM-5 tubular membranes and modeled assuming Maxwell-Stefan diffusion and Langmuir adsorption. The adsorption isotherms determined from these transient measurements at 298 K of N₂ and CO₂ were nearly identical to those measured by calorimetry on H-ZSM-5 powders. The CH₄ isotherm at 298 K was similar to isotherms measured by calorimetry and gravimetric techniques on Na-ZSM-5 and silicalite powders. The similarity of the isotherms indicates that transport of these light gases occurs mainly through zeolite pores. The Maxwell-Stefan diffusion coefficients D_MS depended on concentration and were higher for higher feed partial pressures. Average D_MS values for the two membranes were 7.5, 5 and 1.5×10⁻¹⁰ m²/s for N₂, CH₄, and CO₂, respectively; these are in the same range and order as diffusion coefficients measured in zeolite crystals.     

Detecting similarities in virtual machine behavior for cloud monitoring using smoothed histograms

The growing size and complexity of cloud systems determine scalability issues for resource monitoring and management. While most existing solutions consider each Virtual Machine (VM) as a black box with independent characteristics, we embrace a new perspective where VMs with similar behaviors in terms of resource usage are clustered together. We argue that this new approach has the potential to address scalability issues in cloud monitoring and management. In this paper, we propose a technique to cluster VMs starting from the usage of multiple resources, assuming no knowledge of the services executed on them. This innovative technique models VMs behavior exploiting the probability histogram of their resources usage, and performs smoothing-based noise reduction and selection of the most relevant information to consider for the clustering process. Through extensive evaluation, we show that our proposal achieves high and stable performance in terms of automatic VM clustering, and can reduce the monitoring requirements of cloud systems.     

Test-data generation for control coverage by proof

Many tools can check if a test set provides control coverage; they are, however, of little or no help when coverage is not achieved and the test set needs to be completed. In this paper, we describe how a formal characterisation of a coverage criterion can be used to generate test data; we present a procedure based on traditional programming techniques like normalisation, and weakest precondition calculation. It is a basis for automation using an algebraic theorem prover. In the worst situation, if automation fails to produce a specific test, we are left with a specification of the compliant test sets. Many approaches to model-based testing rely on formal models of a system under test. Our work, on the other hand, is not concerned with the use of abstract models for testing, but with coverage based on the text of programs.     

Effect of cold environment on hepatic microsomal Δ6 and Δ9 desaturase activity of male rats

Male rats maintained at 24 C and then shifted to 5 C for 5 days increased food intake and decreased in growth rate and food conversion. No modification was observed in Δ6 desaturase activity, while Δ9 desaturase activity decreased after this period of time. These results were confirmed by liver microsomal and mitochondrial fatty acid composition. The phospholipid composition of liver microsomes was unaltered, whereas in mitochondria, phosphatidylcholine and sphingomyelin decreased and phosphatidylethanolamine increased due to the cold environment. The influence of food intake and weight changes on fatty acid metabolism was studied using (i) rats maintained at 5 C with restricted food intake to match the food intake of those kept at 24 C with food ad libitum and (ii) rats maintained at 24 C whose food intake was also restricted so that their growth rate would be the same as that of rats maintained at 5 C with food ad libitum, respectively. These results indicate that the negative metabolic balance state of these cold conditions is not an active factor modifier of Δ6 desaturase activity, whereas it decreases Δ9 desaturase activity, reflecting the lipogenic characteristics of the latter enzyme.     

Electrodialytic extraction of Cu,Pb and Cl from municipal solid waste incineration fly ash suspended in water

The possibility of using fly ash from municipal solid waste incineration (MSWI) in, for example, concrete is considered. MSWI fly ash, however, has too high a concentration of heavy metals, which may cause leaching problems during use or problems with waste handling at the end of the lifetime of the concrete. The Cl content in MSWI fly ash is also too high and will cause corrosion problems in reinforced concrete. The possibility of removing some of the unwanted heavy metals (Cu and Pb) together with Cl from an MSWI fly ash suspended in water using an electrodialytic separation method was investigated. The removal of Pb and Cu was found to be highly pH dependent and the highest contents removed were 41 and 90%, respectively. The Cu concentration of the ash decreased from 2200 to 860 mg kg^?1 but the Pb concentration increased from 8560 to 16 800 mg kg^?1, showing that Pb is mainly found in the ash fraction that is least soluble. Hence electrodialytic treatment of the ash suspended in water is not a solution to improve the ash quality in terms of Pb. The water‐soluble Cl content per unit weight of the original ash was 12.4%. The removal of water‐soluble Cl was efficient and >98% of Cl was removed (calculated on the basis of mean initial and final concentrations). This result indicates that electrodialytic extraction may be a method that can be used for the removal of Cl from ash prior to its utilization in concrete. Copyright © 2006 Society of Chemical Industry     

Barocalorimetric technique for monitoring pressurized copolymer reactors

The problem of on‐line estimation of the conversion and composition evolutions in a pressurized batch copolymer reactor with temperature and pressure measurements was addressed. The estimation model consisted of mass and energy balances with a pressure equation built from phase‐equilibrium considerations. The application of a nonlinear geometric estimation approach yielded the underlying solvability condition with physical meaning, a straightforward estimator construction, and a conventional‐like tuning procedure. The resulting barocalorimetric estimator was an on‐line dynamic measurement processor with a model‐based predictor and a measurement‐driven corrector, and whose implementation did not require the polymerization rates and heat‐transfer coefficient function dependencies. The technique was tested with a representative laboratory styrene–butadiene system. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 475–482, 2005     

Comparing global land-cover products – implications for geoscience applications: an investigation for the trans-boundary Mekong Basin

In this article we present the results of a comparison of six globally available land-cover products for the Mekong Basin – an area that spans 795,000 km² and comprises parts of six riparian countries: China, Myanmar, Thailand, Laos, Cambodia, and Vietnam. The basin covers most climatic zones: from high-altitude, snow-covered mountainous regions in the north, to subtropical and tropical rainforest areas and agricultural land further south. The geopolitically important region not only is home to over 72,000,000 inhabitants, but also is a centre of attention of several environmental modelling experts, trying to assess future hydrologic dynamics, climate variability, as well probable land-use developments in the area.

We compare land-cover products of the University of Maryland, UMD 1992–1993, the GLC 2000 product, the GlobCover products of 2004–2006 and 2009, as well as the MODIS-derived land-cover products of 2001 and 2009. For harmonization of individual legends, the Land Cover Classification System, LCCS, has been employed. However, even after harmonization, cross-tabulation among the products reveals extreme differences, where the impact of differing classification algorithms weighs higher than the impact of temporal coincidence of products. Especially, differences within mixed-vegetation classes are large, strongly impacting the overall assessment of forested land, other vegetated land, and even cultivated land in the Mekong Basin. The findings presented here are of high relevance for the modelling community as well as Mekong-related environmental studies, which should consider global remote-sensing-derived products with caution and solid background knowledge.     

Spatio‐temporal geometry fusion for multiple hybrid cameras using moving least squares surfaces

Multi‐view reconstruction aims at computing the geometry of a scene observed by a set of cameras. Accurate 3D reconstruction of dynamic scenes is a key component for a large variety of applications, ranging from special effects to telepresence and medical imaging. In this paper we propose a method based on Moving Least Squares surfaces which robustly and efficiently reconstructs dynamic scenes captured by a calibrated set of hybrid color+depth cameras. Our reconstruction provides spatio‐temporal consistency and seamlessly fuses color and geometric information. We illustrate our approach on a variety of real sequences and demonstrate that it favorably compares to state‐of‐the‐art methods.     

Study of the thermomechanical and electrical properties of conducting composites containing natural rubber and carbon black

This work describes the preparation and characterization of composite materials obtained by the combination of natural rubber (NR) and carbon black (CB) in different percentages, aiming to improve their mechanical properties, processability, and electrical conductivity, aiming future applications as transducer in pressure sensors. The composites NR/CB were characterized through optical microscopy (OM), DC conductivity, thermal analysis using differential scanning calorimetry (DSC), dynamic mechanical thermal analysis (DMA), thermogravimetry (TGA), and stress–strain test. The electrical conductivity varied between 10^?9 and 10 S m^?1, depending on the percentage of CB in the composite. Furthermore, a linear (and reversible) dependence of the conductivity on the applied pressure between 0 and 1.6 MPa was observed for the sample with containing 80 wt % of NR and 20% of CB. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007