In times of survival, the right of silence

The purpose of this study was to assess cortical and cancellous bone responses to unilateral limb immobilization and, subsequently, to remobilization with exercise, in a young adult canine model. Right forelimbs of 14 1-2-year old mongrel dogs were immobilized in a non-weight-bearing position by a bandage for 16 weeks. Six control dogs were untreated. At 16 weeks, seven immobilized and three control dogs were euthanized. The remaining seven immobilized dogs began a recovery protocol consisting of 16 weeks of kennel confinement (without the right forelimb bandaged) followed by 16 weeks of treadmill exercise conducted three times per week. These seven dogs and three control dogs were euthanized at 48 weeks. Bone mineral density of the proximal radii was determined with dual-energy X-ray absorptiometry and humeral middiaphyseal cross-sectional areas were determined with computed tomography. Humeri were tested in cranio-caudal three-point bending to failure. Cancellous bone cores from the lateral humeral condyles had wet apparent density determined and were tested to failure in compression. Mechanical properties, bone density, and cross-sectional areas were compared between immobilized (right forelimb), contralateral weight bearing (left forelimb), and control forelimbs with Kruskal-Wallis and post hoc tests. At 16 weeks, bone mineral density, cortical load, yield, and stiffness as well as cancellous bone failure stress, yield stress, and modulus were significantly lower (p < 0.02) for immobilized limbs than control limbs. Immobilized limb cancellous bone mechanical properties were 28%-74% of control values, and cortical bone mechanical properties were 71%-98% of control values. After 32 weeks of remobilization, cortical and cancellous bone mechanical properties were not different from control values except that cortical bone failure stress and modulus were significantly higher (p < 0.01) between remobilized and control limbs. In summary, 16 weeks of forelimb immobilization was associated with significantly lower mechanical properties, and with greater differences in cancellous than cortical bone properties. Mechanical properties were not different from control values after 32 weeks of recovery that included 16 weeks of treadmill exercise.     

Predictive equation for acquisition of hepatitis B in hospital workers in a general hospital

A cross-sectional study was performed to obtain risk factors for hepatitis B disease, HBsAg carriers and immunised personnel, among 2470 workers in a general hospital in Madrid, Spain. The data obtained were analyzed with multiple logistic regression to obtain beta coefficients for variables. The results of the analysis show that being a nurse or being regularly exposed to blood are the most important risk factors for hepatitis B acquisition. The length of time working at the same job activity was also a risk factor. The resulting beta coefficients allow the construction for a hepatitis non-immunised, HBsAg carrier and immunised HBV status, which can select subjects for a hepatitis B vaccination program.     

Climatic solar roof: an ecological alternative to heat dissipation in buildings

A new system based on the harnessing of solar and wind power is presented for heat dissipation in air conditioning facilities. The innovation offered by the new system is the integration of two well-known subsystems: a cooling tower and a solar chimney which increases the air flow without the use of electric power. The system is described and presented together with a model for its study. The field data acquired from the prototype built in southern Spain establishes the actual potential of the system, which provides a new approach to a sustainable technological development.     

Generation of Technology-Independent Retargetable Analog Blocks

This paper introduces a complete methodology for retargeting of analog cells to different sets of specifications. This methodology is technology-independent, thus allowing the migration, from one technology to another, of the circuit under retargeting. Careful integration of the device sizing and layout generation tasks via the incorporation of layout constraints during the sizing process allows to generate fully functional designs in a few minutes. The methodology is illustrated via the retargeting of a fully-differential Miller-compensated two-stage operational amplifier for a new set of specifications and two different technological processes.An erratum to this article can be found at     

Comparative study of the colorants monascus and cochineal used in the preparation of gels made with various gelling agents

The possibilities of using monascus to colour gels were studied by comparing it with cochineal. Gels were prepared with four gelling agents—carrageenan, gellan, gelatine and xanthan—and their colour was measured with a Hunter Lab colorimeter. The equations relating L^* and h with the concentrations of sugar [SU] and colorant [COL] were deduced, and it was found that [COL] had more influence on colour than [SU]. In general, for these four gelling agents the colour of monascus gels is orange-red and the colour of cochineal gels is purplish red. The gels made with xanthan were always the lightest, whether they were made with cochineal or with monascus.     

NO emission characteristics in counterflow diffusion flame of blended fuel of H2/CO2/Ar

Flame structure and NO emission characteristics in counterflow diffusion flame of blended fuel of H₂/CO₂/Ar have been numerically simulated with detailed chemistry. The combination of H₂, CO₂ and Ar as fuel is selected to clearly display the contribution of hydrocarbon products to flame structure and NO emission characteristics due to the breakdown of CO₂. A radiative heat loss term is involved to correctly describe the flame dynamics especially at low strain rates. The detailed chemistry adopts the reaction mechanism of GRI 2.11, which consists of 49 species and 279 elementary reactions. All mechanisms including thermal, NO₂, N₂O and Fenimore are taken into account to separately evaluate the effects of CO₂ addition on NO emission characteristics. The increase of added CO₂ quantity causes flame temperature to fall since at high strain rates a diluent effect is prevailing and at low strain rates the breakdown of CO₂ produces relatively populous hydrocarbon products and thus the existence of hydrocarbon products inhibits chain branching. It is also found that the contribution of NO production by N₂O and NO₂ mechanisms are negligible and that thermal mechanism is concentrated on only the reaction zone. As strain rate and CO₂ quantity increase, NO production is remarkably augmented. Copyright © 2002 John Wiley & Sons, Ltd.