Spouted bed drying of cork stoppers

The spouted bed is commonly used to dry granular particles as it displays some special characteristics which render it capable of performing cyclic operations, with particles that are very difficult to fluidize under a different type of bed.Information on the characteristic drying rates of cork stoppers is still very limited in the technical and scientific literature, and until now no published data was found on the spouted bed drying of cork stoppers.The characterization of the drying performance of Port wine cork stoppers was carried out in a laboratory scale spouted bed. Characteristic drying curves were determined with 29 mm × 21 mm cork stoppers under several operating conditions. Values for the effective diffusivity were obtained in the range of 1.36 × 10⁻⁹ to 4.44 × 10⁻⁹ m²/s, with the temperature dependence represented by an Arrhenius-type relationship. The activation energy obtained was 28.72 kJ/mol.     

Speciation of the semivolatile hydrocarbon engine emissions from sunflower biodiesel

Biodiesel fuel is a very attractive alternative to conventional fuel and its effects in the engine performance and regulated emissions have been widely studied. However, the impact on unregulated individual compounds or chemical characteristics of exhaust emissions is not fully characterized. In this paper, the semivolatile fractions of the exhaust emissions of biodiesel blends and conventional fuel have been speciated. The results show great differences between the compounds emitted, especially regarding oxygenated and aromatic species. Likewise, there is a clear relationship between speciated hydrocarbons and other important emissions such as total hydrocarbons (HC), particulate matter (PM), volatile organic fraction (VOF) and mean particle diameter (Dm) of PM.     

Specific consumption of liquid biofuels in gasoline fuelled engines

Oxygenated fuels increase fuel consumption due to their low enthalpy of combustion; however, their high antiknock index renders them suitable for use in engines with a high compression rate, increasing their thermal yield. This study evaluated the performance of biorenewable oxygenated fuels (ethanol and isoamyl alcohol) and partially renewable fuels (ETBE: ethyl tert-butyl ether, TAEE: tert-amyl ethyl ether and di-TAE: di-tert-amyl ether) with high degree of purity and in mixtures with automotive gasoline, based on tests with Otto cycle engines. Among the oxygenated fuels evaluated here, di-TAE was found to present the best characteristics of performance, both individually and in mixtures with gasoline.     

Nonisothermal melt-crystallization kinetics of isotactic polypropylene synthesized with a metallocene catalyst and compounded with different quantities of an α nucleator

The nonisothermal crystallization kinetics of a metallocene-made isotactic polypropylene (m-iPP) and its compounds with 0.1 wt % and 0.3 wt % of a sorbitol derivative [1,3:2,4-bis(3,4-dimethylbenzylidene)sorbitol (DMDBS); an α nucleator] were investigated by differential scanning calorimetry at different cooling rates from the melt. The nucleation efficiency was proved by a significant increase in the crystallization temperatures (accompanied by a slight augmentation of the degree of crystallinity and a decrease in the crystal sizes). This increase in the crystallization temperatures led to higher amounts of fractional content in the γ polymorph, even though DMDBS was supposed to be a nucleator for the α form. The Avrami and Ozawa methods effectively described only the early stage of crystallization, whereas a combined Avrami–Ozawa method was valid for the whole crystallization process. The values of the exponent for this method decreased for nucleated samples in the later stage of crystallization, especially in the case of m-iPP with 0.3 wt % DMDBS added (m-iPP03). The activation energy of the process and the surface free energy were also estimated. The production of considerable proportions of the γ polymorph in m-iPP03 corresponded to higher values of the activation energy and lower values of the surface free energy. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Potential applications of poly(vinyl alcohol)‐congo red aqueous solutions and hydrogels as liquids for hydraulic fracturing

The authors report on the viscoelastic characterization of guar hydrogels obtained through complexation reactions with borax ions. These gels are compared with hydrogels obtained from poly(vinyl alcohol) of different degree of hydrolysis through complexation reactions with congo red. The effect of the degree of hydrolysis and both, the concentration of PVA and the concentration of congo red, on the viscoelastic properties of the hydrogels is analyzed. The potential use of the PVA‐based hydrogels as hydraulic fracturing liquids is discussed in relation to the commonly used fracturing liquid based on the guar–borax system. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Faculty and Student Attitudes Toward Community Service: A Comparative Analysis

The Humanitarian Engineering initiative, sponsored by the William and Flora Hewlett Foundation, at the Colorado School of Mines, is creating a program that will support engineering students in understanding their responsibility for solving community development problems that exist throughout the world. As part of this effort, data has been collected on faculty and student attitudes using the ‘Community Service Attitudes Scale,” developed and validated by Shiarella, McCarthy, and Tucker. During the fall 2004, 78 students and 34 faculty members responded to this instrument. Statistically significant differences were found between the attitudes of students and faculty, males and females, and among different age groupings with respect to service activities. A general finding was that faculty displayed better attitudes toward community service than the students.     

How disorder can diminish avalanche risks: effect of size distribution

We study the behavior of disk assemblies with a variable disorder distribution. The packing is first consolidated and then continuously tilted very slowly. The amount of displaced disks for each tilted angle is recorded. Large displacements of the disks can occur due to some local or global mechanical instabilities. The definition of neighboring disks is based on radical (extension of Voronoï) tessellation rules to decompose, in a unique and perfectly defined manner, the two-dimensional space for polydisperse disks. In this way, by comparing the characteristics of stability for one disk to the neighboring ones for local ordered cluster, we can predict the global amount of displaced disks. Some tilting cycles have been performed to check the correlation between the instability of the packing structure (collective displacements) with micro and macro order parameters.     

Nodally exact Ritz discretizations of 1D diffusion–absorption and Helmholtz equations by variational FIC and modified equation methods

This article presents the first application of the Finite Calculus (FIC) in a Ritz-FEM variational framework. FIC provides a steplength parametrization of mesh dimensions, which is used to modify the shape functions. This approach is applied to the FEM discretization of the steady-state, one-dimensional, diffusion–absorption and Helmholtz equations. Parametrized linear shape functions are directly inserted into a FIC functional. The resulting Ritz-FIC equations are symmetric and carry a element-level free parameter coming from the function modification process. Both constant- and variable-coefficient cases are studied. It is shown that the parameter can be used to produce nodally exact solutions for the constant coefficient case. The optimal value is found by matching the finite-order modified differential equation (FOMoDE) of the Ritz-FIC equations with the original field equation. The inclusion of the Ritz-FIC models in the context of templates is examined. This inclusion shows that there is an infinite number of nodally exact models for the constant coefficient case. The ingredients of these methods (FIC, Ritz, MoDE and templates) can be extended to multiple dimensions