Elimination of organic matter present in wastewaters from the cork industry by membrane filtration

BACKGROUND: The first stage of the cork industrial process generates great volumes of wastewater with moderate to high organic pollutant content that must be purified using different procedures, such as filtration by membranes. RESULTS: The tangential filtration of these wastewaters was studied using two different laboratory equipments. In the first one, three ultrafiltration (UF) membranes were tested, with molecular weight cut‐off (MWCO) 100 kDa and 30 kDa, and two operating modes were used: total recycling of permeate and retentate streams, and in continuous mode, without recycling both streams. In the total recycling UF experiments, the influence of the operating variables on the permeate flux was first established. The effectiveness of the different membranes was determined by evaluating the rejection coefficients for several parameters that measure the global pollutant content of the effluent. The values found for these rejection coefficients were in the following order: ellagic acid and color > absorbance at 254 nm > tannic content > COD (chemical oxygen demand). In the continuous mode experiments, the fouling mechanism for each membrane was established by fitting the experimental data to various filtration fouling models given in the literature. The operating mode in the second equipment was batch concentration, and additional experiments were carried out with an UF membrane (2 kDa), and with a NF membrane (with MWCO in the range 150–300 Da). CONCLUSIONS: The three operating modes tested provided different rejection levels of organic matter; among them, the most effective procedure tested was batch concentration mode using a NF membrane. Copyright © 2007 Society of Chemical Industry     

Sequential batch reactor for eucalypt kraft pulp effluent treatment with Trametes versicolor

BACKGROUND: A sequential batch reactor (SBR) was used for eucalypt kraft pulp effluent treatment with Trametes versicolor. A 2³ full factorial design and response surface methodology were applied to optimise the batch fermentation conditions. Effluent concentration, culture medium and inoculum age were the factors selected for this study in order to optimise the reduction of chemical oxygen demand (COD). RESULTS: The presence of Trametes Defined Medium (TDM) in the fermentation was required to obtain a significant COD reduction. Experiments in the batch reactor confirmed, in general, the predicted results of optimisation developed from Erlenmeyer batch assays. The T. versicolor culture remained active during 42 days of study in the SBR, providing approximately 80% of COD reduction. CONCLUSION: Trametes versicolor may be considered as very promising for the biological treatment of effluents from kraft pulp mills in an SBR system instead of the activated sludge mixed cultures traditionally used. Copyright © 2008 Society of Chemical Industry     

A rubber-modified thermoplastic where the morphology produced by phase-separation induced by polymerization disappears at high conversions

An unexpected experimental finding is reported where the primary morphology developed during polymerization-induced phase separation in a rubber-modified thermoplastic practically disappears at high conversions. This process was evidenced by light scattering (LS) and scanning electron microscopy (SEM) for a particular composition of solutions of polyisobutylene oligomers (PIB) in isobornylmethacrylate (IBoMA), during the free-radical polymerization of the monomer. The primary phase separation produced a dispersion of domains rich in PIB containing significant amounts of the monomer (IBoMA). Polymerization of the monomer in these domains occurred at high overall conversions producing the filling of dispersed domains with a PIBoMA-PIB blend that could not be distinguished from the matrix. Under these conditions the final material had the appearance of a homogeneous blend.     

Xylene Isomerization in a ZSM-5/SS Membrane Reactor

A membrane reactor containing different types of ZSM-5/porous SS membranes was used to perform the xylene isomerization reaction. The parent Na-ZSM-5 layer was synthesized by secondary growth on top of porous stainless steel tubes. The xylene isomerization reaction was carried out at different temperatures in the membrane reactor and in a fixed-bed reactor of identical geometry for comparison. Two different kinds of membranes were prepared by ion exchange: a Pt/H-ZSM-5 catalytic membrane and two Ba-ZSM-5 composites with different Ba²⁺ concentration. The p-xylene production using 100% exchanged Ba-membrane was about 28% higher than the fixed-bed reactor at 370 °C, when m-xylene was fed.     

High performance air pollution modeling for a power plant environment

The aim of this work is to provide a high performance air quality simulation using the STEM-II (Sulphur Transport Eulerian Model 2) program, a large-scale pollution modeling application. First, we optimize the sequential program with the aim of increasing data locality. Then, we parallelized the program using OpenMP directives for shared memory systems, and the MPI library for distributed memory machines. Performance results are presented for a SGI O2000 multiprocessor, a Fujitsu AP3000 multicomputer and a Cluster of PCs. Experimental results show that the parallel versions of the code achieve important reductions in the CPU time needed by each simulation. This will allow us to obtain results with adequate speed and reliability for the industrial environment where it is intended to be applied.     

Thomas Fincke und die <Emphasis Type="Italic">Geometria rotundi</Emphasis>

Thomas Fincke (January 6^th, 1561–April 24^th, 1656), born in Flensburg (Germany), was one of the very most important and significant scientists in Denmark during the seventeenth century, a mathematician and astrologer and physician in the beginning of modern science, a representative of humanism and an influentual academic organizer. He studied in Strasbourg (since 1577) and Padua (since 1583) and received his M.D. in Basel (1587), he practised as a physician throughout his life (since 1587 or 1590) and became a professor at Copenhagen (1591). But he was best known because of his Geometriae rotundi libri XIIII (1583), a famous book on plane and spherical trigonometry, based not on Euclid but on Petrus Ramus. In this influentual work, in which Fincke introduced the terms tangent and secant and probable first noticed the Law of Tangents and the so-called Newton-Oppel-Mauduit-Simpson-Mollweide-Gauss-formula, he showed himself to be „abreast of the mathematics of his time“.      

Fish assemblages and stream hydraulics: consistent relations across spatial scales and regions

General relationships between organisms and their habitat, consistent across spatial scales and regions, suggest the existence of repeatable ecological processes and are useful for the management of stream networks. From published data, we defined four guilds of European fish species with contrasting preferences for microhabitat hydraulics within stream reaches. At the scale of stream reaches and across 139 French sites (590 460 fishes sampled), we analysed how fish guild proportions were related to reach hydraulics (proportion of pools vs. riffles %POOL; median discharge by unit width Q50/W). The strongest correlations were observed between two fish guilds and %POOL (p < 0.001, r² ≥ 0.41) and between one fish guild proportion and Q50/W (p < 0.001, r² = 0.10). These reach–scale relationships were consistent across six large French basins, and consistent with the analyses made at the microhabitat scale. Therefore, microhabitat preferences for hydraulics are strong enough to generate consistent reach‐scale community responses to hydraulics across regions, despite the influence of other filters such as temperature, nutrient levels or history. The distribution of basic geomorphic features (pools, riffles) in streams and their modification (by dams, weirs and dikes) can modify the proportion of fish guilds by up to 80%, probably contributing to the long‐term decline of riffle‐dwelling species in Europe. Copyright © 2006 John Wiley & Sons, Ltd.     

Uncertainty analysis based on sensitivity applied to angle-ply composite structures

This article describes a finite element-based formulation for the statistical analysis of the response of stochastic structural composite systems whose material properties are described by random fields. A first-order technique is used to obtain the second-order statistics for the structural response considering means and variances of the displacement and stress fields of plate or shell composite structures. Propagation of uncertainties depends on sensitivities taken as measurement of variation effects. The adjoint variable method is used to obtain the sensitivity matrix. This method is appropriated for composite structures due to the large number of random input parameters. Dominant effects on the stochastic characteristics are studied analyzing the influence of different random parameters. In particular, a study of the anisotropy influence on uncertainties propagation of angle-ply composites is carried out based on the proposed approach.     

Crystallization study of chemically vapour-deposited amorphous silicon films by in situ x-ray diffraction

The solid phase crystallization kinetics of chemically vapour-deposited amorphous silicon films were studied by in situ X-ray diffraction. We determined the crystalline volume directly from the Bragg peak intensities at various times during isothermal annealing in the temperature range 578 °C < T < 658 °C. From these experiments we deduced that the crystallization was due to nucleation predominantly at the substrate-film interface followed by crystal growth perpendicular to this interface. The crystal growth rate was thermally activated with an activation energy E_v of 3.1 eV. A strong 〈111〉 preferred orientation of the growing polycrystal was observed and the grain size remained constant at about 60 nm. Evidence of stresses at the amorphous-crystalline interface during the early stages of crystallization was observed. A comparison with previous conductivity measurements is also carried out.