Synthesis, 1H−NMR and Electronic Absorption Spectra,and Halochromic Properties of Bis(2-methyl-1-phenyl-3-isoindolyl)-(het)arylmethane Dyes

Several bis(2-methyl-1-phenyl-3-isoindolyl)-(het)arylmethane perchlorate dye salts have been synthesised, the (het)aryl substituent representing the acceptor systems 2-benzothiazolyl, 1-methyl-2-benzimidazolyl, 4-quinolyl, 4- and 2-pyridyl as well as phenyl.The constitution of these green dye salts was supported by their ¹H-NMR spectra. The variation of the electronic absorption maxima of this dye series was in accord with theoretical considerations based on SCF-CI and PMO calculations. They give rise to the statement that the bathochromic effect of the varied (het)aryl group is essentially due to a LUMO-LUMO interaction with the di-isoindolylmethane cyanine moiety, i.e. a second-order perturbation, enlarging the bathochromic shift caused by the increased twist angles inflicted on the central bonds by the bulkiness of the (het)aryl substituents (a first-order perturbation). The halochromic properties of these dyes are explicable on the same basis.The dissociation constants pK^★ and pK^★_R+ were measured and compared with analogous di-indolyl- (1) and di-indolizinyl-hetaryl-methane dyes (4), showing little difference with regard to the former and the distinct sequence indolizinyl > indolyl > isoindolyl dye series for the latter.     

Is Chlorogenic Acid Bitter?

Chlorogenic acid at 5° published threshold concentration (100 mg/ L) in aqueous 0.2% potassium acid tartrate was not significantly more bitter than aqueous 0.2% potassium tartrate alone when evaluated by taste panel.     

Low-threshold, high-power zero-order lateral-mode DQW-SCH metal-clad ridge waveguide (AlGa)As/GaAs lasers

Metal-clad ridge waveguide (MCRW), double quantum well, separately confined heterostrucuture (DQW-SCH) lasers have been fabricated having continuous-wave (CW) threshold currents of 10?12 mA and external differential quantum efficiencies of 41?46% per uncoated facet. Light/current characteristics are linear to >70 mW, and zero-order lateral mode operation was measured at 56 mW. The CW burn-off power density is nearly double the best previously reported value.     

Convergence of genetic algorithms

The mean convergence of various versions of a genetic algorithm are considered. A number of convergence statements are formulated and relevant estimates are obtained. A hypothesis concerning the form of these estimates under variation of the structure of a genetic algorithm is put forward. Roman Riviyanovich Sharapov. Born 1981. Graduated from the Faculty of Mechanics and Mathematics, Ural State University, in 2003. Presently, a postgraduate at the Department of Mathematical Economics at the same university. Scientific interests: genetic algorithms, neural networks, and financial mathematics. Aleksandr Vyacheslavovich Lapshin. Born 1980. Graduated from the Faculty of Mechanics and Mathematics, Ural State University, in 2003. Presently, a postgraduate at the Department of Mathematical Economics at the same university. Scientific interests: financial mathematics, genetic algorithms, and neural networks.     

Optimization of Automated Synthesis of 2-[18F]Fluoro-2-deoxy-D-glucose Involving Base Hydrolysis

Synthesis of 2-[¹⁸F]fluoro-2-deoxy-D-glucose ([¹⁸F]FDG) involving base hydrolysis was optimized. Fluorine-18 was isolated from irradiated water to more than 90% by sorption of [^{1 8}F]fluoride on QMA anion-exchange resin, which was followed by elution with a 96 : 4 (by volume) acetonitrile-water mixture containing Kryptofix 2.2.2 and potassium carbonate (molar ratio 2 : 1). This composition is the best for preparing the complex [K/K2.2.2]^{+ 18}F^- used in nucleophilic fluorinations. No additional azeotropic drying is required. Base hydrolysis under optimized conditions (40-45°C), followed by neutralization with HCl, removal of traces of the solvent, and purification of the final product on a combined SCX/Alumina N column, yielded [^{1 8}F]FDG of high radiochemical (>99%) and chemical purity with minimal product loss. With an RB-86 robotic system (Anatech, Sweden), the synthesis time was 38 min. The procedure is used in the Institute of Human Brain, Russian Academy of Sciences for routine synthesis of FDG; the radiochemical yield of the product by the end of synthesis (EOS) is reproducibly high: 63±3% (n = 40).     

Equal-channel angular extrusion of beryllium

The equal-channel angular extrusion (ECAE) technique has been applied to a powder metallurgy (P/M) source Be alloy. Extrusions have been successfully completed on Ni-canned billets of Be at approximately 425°C. No cracking was observed in the billets, and significant grain refinement was achieved. In this article, microstructural features and dislocation structures are discussed for a singlepass extrusion, including evidence of <c> and <c+a> dislocations. Significant crystallographic texture developed during ECAE, which is discussed in terms of this unique deformation processing technique and the underlying physical processes which sustain the deformation. S.R. AGNEW, formerly with the Oak Ridge National Laboratory, Oak Ridge, TN 37831-6115 This article is based on a presentation made in the symposium entitled “Defect Properties and Mechanical Behavior of HCP Metals and Alloys” at the TMS Annual Meeting, February 11–15, 2001, in New Orleans, Louisiana, under the auspices of the following ASM committees: Materials Science Critical Technology Sector, Structural Materials Division, Electronic, Magnetic & Photonic Materials Division, Chemistry & Physics of Materials Committee, Joint Nuclear Materials Committee, and Titanium Committee.     

Simulation of magnetic component models in electric circuitsincluding dynamic thermal effects

It is essential in the simulation of power electronics applications to model magnetic components accurately. In addition to modeling the nonlinear hysteresis behavior, eddy currents and winding losses must be included to provide a realistic model. In practice the losses in magnetic components give rise to significant temperature increases which can lead to major changes in the component behavior. In this paper a model of magnetic components is presented which integrates a nonlinear model of hysteresis, electro-magnetic windings and thermal behavior in a single model for use in circuit simulation of power electronics systems. Measurements and simulations are presented which demonstrate the accuracy of the approach for the electrical, magnetic and thermal domains across a variety of operating conditions, including static thermal conditions and dynamic self heating     

Front Cover

In this paper, the authors present the results of experiments which clearly demonstrate a technical basis confirming that the carrier frequency harmonics data can be used for diagnostics relative to motor stator insulation degradation.     

Determination of dislocation densities in HCP metals from X-ray diffraction line-broadening analysis

X-Ray diffraction (XRD) line-broadening analysis has been performed on highly textured Zr-2.5Nb specimens which had been deformed in tensile tests to produce well-controlled dislocation structures. An iterative deconvolution method has been applied to extract the broadening function for the material, using as standards, a Zr single crystal and a 0 pct deformed specimen. In both cases, for specific tensile tests, a significant contribution to the basal line braodening was observed, which was clearly not directly related to the dislocation structure generated by the deformation, i.e., so-called c-component dislocations having a component of their Burgers vectors perpendicular to the basal plane. Calculations showed that the extent of basal line broadening cannot be attributed to the secondary effect of strain from a-type dislocations, i.e., dislocations with Burgers vectors parallel with the basal plane. It is concluded that most of the line broadening observed was the result of intergranular strain distributions. These distributions are most prominent for grains oriented with their c-axes perpendicular to the tensile-deformation axis and resulted in basal-plane line broadening even when there were few, if any, c-component dislocations present. This article is based on a presentation made in the symposium entitled “Defect Properties and Mechanical Behavior of HCP Metals and Alloys” at the TMS Annual Meeting, February 11–15, 2001, in New Orleans, Louisiana, under the auspices of the following ASM committees: Materials Science and Critical Technology Sector, Structural Materials Division, Electronic, Magnetic & Photonic Materials Division, Chemistry & Physics of Materials Committee, Joint Nuclear Materials Committee, and Titanium Committee.