Biosynthesis of silver nanoparticles in collagen gel improves their medical use in periodontitis treatment

Silver nanoparticles (AgNP) suspensions were biosynthesized by silver ions reduction in the presence of collagen, a nontoxic, organic polymer, intending to improve their medical use in periodontitis treatment. Spectrophotometric measurements showed a time- and concentration-dependent increase of AgNP formation in each suspension variant. Transmission electron microscopy revealed spherical morphology of AgNP in collagen and their mean diameter size was around 30?nm. The particle size distribution and zeta potential values of AgNP in collagen were determined by dynamic light scattering measurements. The surface charge of AgNP in collagen was positive, while commercial AgNP stabilized in citrate had negative surface charge. In vitro cytotoxicity testing of AgNP in collagen showed that they were biocompatible with human gingival fibroblasts in a wider range of concentrations than commercial nanoparticles. The antibacterial activity of AgNP in collagen against two pathogenic strains present in the periodontal pocket was dose-dependent and higher than that of AgNP in citrate. All these results demonstrated that AgNP prepared in collagen gel had improved properties, like small diameter, positive surface charge, high biocompatibility in human gingival fibroblasts, efficiency against bacterial growth and, thus, better therapeutic potential in periodontal disease treatment.     

Self-doped N-propansulfonic acid polyaniline-polyethylene terephthalate film used as active sensor element for humidity or gas detection

In this work, we report the fabrication of sensors’ element for humidity or gases, prepared by in situ polymerization of aniline N-propansulfonic acid using ammonium persulfate in acidic medium. The polymer is being used in the form of powder or deposited in multiple layers onto the PET film. Various techniques including Fourier Transform infrared (FTIR), ultraviolet-–visible spectroscopy (UV–vis), X-ray diffraction (XRD) and scanning electron microscopy (SEM) were employed to characterize the as-prepared sensing materials. The film has been tested for humidity influence, where the significant variations in electrical characteristics were observed, suggesting its usefulness for humidity sensors. Also, for different organic and inorganic gases, a relatively low operating temperature and important sensitivity were observed that indicate its applicability as an active element for general gases sensors. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47743.     

Three-dimensional investigation and scoring of extracellular matrix remodeling during lung fibrosis using multiphoton microscopy

The organization of collagen during fibrotic processes is poorly characterized because of the lack of appropriate methodologies. Here we show that multimodal multiphoton microscopy provides novel insights into lung fibrosis. We characterize normal and fibrotic pulmonary tissue in the bleomycin model, and show that second-harmonic generation by fibrillar collagen reveals the micrometer-scale three-dimensional spatial distribution of the fibrosis. We find that combined two-photon excited fluorescence and second-harmonic imaging of unstained lung tissue allows separating the inflammatory and fibrotic steps in this pathology, underlining characteristic features of fibroblastic foci in human Idiopathic Pulmonary Fibrosis samples. Finally, we propose phenomenological scores of lung fibrosis and we show that they unambiguously sort out control and treated mice, with a better sensitivity and reproducibility in the subpleural region. These results should be readily generalized to other organs, as an accurate method to assess extracellular matrix remodeling during fibrosis.     

Assessment of calcium-based chemical looping options for gasification power plants

This paper evaluates various calcium-based chemical looping concepts to be applied in Integrated Gasification Combined Cycle (IGCC) plants for decarbonised energy vectors poly-generation (with emphasis on power generation and hydrogen and power co-generation). Two calcium-based chemical looping configurations were analysed. The first concept is based on post-combustion capture using the flue gases resulted from the power block (combined cycle gas turbine). The second concept is based on pre-combustion capture, the calcium-based chemical looping systems being used simultaneous to capture carbon dioxide (by sorbent enhanced water gas shift) and to concentrate the syngas energy in the form of hydrogen-rich gas.     

Isolation and Characterization of New Microsatellite Markers for the Invasive Softshell Clam, Mya arenaria (L.) (Bivalvia: Myidae)

The invasive softshell clam (Mya arenaria Linnaeus, 1758) is native to the northwestern region of the Atlantic Ocean. This species has been introduced in the northeast Pacific and along the European coasts, due to intense naval transports and aquaculture, and it is now present in all the European seas. In this paper we describe seven new microsatellite loci for Mya arenaria. The isolated loci are polymorphic with a number of alleles per locus between 6 and 14. The observed and expected heterozygosities ranged from 0.417 to 0.951, and from 0.643 to 0.895, with an average of 0.716 and 0.775, respectively. These microsatellite markers should be useful in analyzing this species' genetic diversity, which could explain various processes of its invasion history.     

Amorphous alumina coatings: processing, structure and remarkable barrier properties

Amorphous aluminium oxide coatings were processed by metalorganic chemical vapour deposition (MOCVD); their structural characteristics were determined as a function of the processing conditions, the process was modelled considering appropriate chemical kinetic schemes, and the properties of the obtained material were investigated and were correlated with the nanostructure of the coatings. With increasing processing temperature in the range 350 degrees C-700 degrees C, subatmospheric MOCVD of alumina from aluminium tri-isopropoxide (ATI) sequentially yields partially hydroxylated amorphous aluminium oxides, amorphous Al2O3 (415 degrees C-650 degrees C) and nanostructured gamma-Al2O3 films. A numerical model for the process allowed reproducing the non uniformity of deposition rate along the substrate zone due to the depletion of ATI. The hardness of the coatings prepared at 350 degrees C, 480 degrees C and 700 degrees C is 6 GPa, 11 GPa and 1 GPa, respectively. Scratch tests on films grown on TA6V titanium alloy reveal adhesive and cohesive failures for the amorphous and nanocrystalline ones, respectively. Alumina coating processed at 480 degrees C on TA6V yielded zero weight gain after oxidation at 600 degrees C in lab air. The surface of such low temperature processed amorphous films is hydrophobic (water contact angle 106 degrees), while the high temperature processed nanocrystalline films are hydrophilic (48 degrees at a deposition temperature of 700 degrees C). It is concluded that amorphous Al2O3 coatings can be used as oxidation and corrosion barriers at ambient or moderate temperature. Nanostructured with Pt or Ag nanoparticles, they can also provide anti-fouling or catalytic surfaces.     

Sinanodonta woodiana (mollusca: bivalvia: unionidae): isolation and characterization of the first microsatellite markers

Sinanodonta woodiana (Lea, 1834) is a large Unionid species with a real invasion success. It colonized Europe, Central America, the Indonesian Islands and recently North America. The species life cycle involves a larval parasitic stage on freshwater fish species which contributes to the spread of the mussel. In this paper we describe, for the first time, eight polymorphic microsatellite loci for the species Sinanodonta woodiana. The genetic screening of individuals confirmed that all loci were highly polymorphic. The number of alleles per locus ranged from 7 to 14 and the observed heterozygosity ranged from 0.650 to 0.950. These loci should prove useful to study the species population genetics which could help to infer important aspects of the invasion process.     

Biomolecular urease thin films grown by laser techniques for blood diagnostic applications

Matrix assisted pulsed laser evaporation (MAPLE) was used for growing urease thin films designed for bio-sensor applications in clinical diagnostics. The targets exposed to laser radiation were made from a frozen composite manufactured by dissolving biomaterials in distilled water. We used a UV KrF* (λ = 248 nm, τ_FWHM ? 30 ns, ν = 10 Hz) excimer source for multipulse laser irradiation of the frozen targets cooled with Peltier elements. The laser source was operated at an incident fluence of 0.4 J/cm². Urease activity and kinetics were assayed by the Worthington method that monitors urea hydrolysis by coupling ammonia production to a glutamate dehydrogenase reaction. A decrease in absorbance was measured at 340 nm and correlated with the enzymatic activity of urease. We show that the urease films obtained by MAPLE techniques remain active up to three months after deposition.     

基于知网的词语语义相似度改进算法研究

词语语义相似度计算在很多自然语言处理相关领域都有着广泛应用.基于知网的现有词语语义相似度计算方法未深入考虑同棵义原层次树的义原距离、义原深度、义原密度及主次关系的影响,致使相似度计算结果并不够精确.针对该问题,提出一种词语语义相似度改进算法,通过分析知网中的义项表达式和义原层次树,用集合的加权平均值代替了义项相似度最大...