Friction and wear characteristics of organic thiophosphoro derivatives — a critical appraisal

The friction- and wear-reducing characteristics of a number of oil soluble sulphurised and phosphosulphurised derivatives for automotive and industrial applications have been reviewed. A critical appraisal of the suggested causes and mechanism of friction reduction and antiwear characteristics has been made. A review of the investigations carried out so far indicates that the creation of in situ films of simple inorganic salts, such as molybdenum disulphide, iron sulphide or phosphates of low shear strength and lamellar structures, does not appear to be the primary cause of low friction and wear. The authors have, therefore, undertaken a programme to synthesise and study the chemistry and tribochemical reactions in relation to friction and wear characteristics of hydrocarbon-soluble thiophosphoro derivatives of alkyl phenol, alcohols and fatty esters, in order to establish relationships between the reactivity, chemical nature and crystal structure of films formed on rubbing surfaces, and antifriction and antiwear characteristics. Molybdenum salts of various phosphorothio derivatives of pentadecylphenol and lauryl oleate of specific structures have been synthesised, and the friction and wear properties of their blends in mineral oil base stock have been studied. It can be clearly inferred from the results that type of bonding between sulphur, phosphorus and molybdenum, and reactivity of these derivatives with rubbing surfaces, determine their friction-reducing and antiwear characteristics. Their reactivity with iron and the nature of films formed are under investigation.     

Simultaneous interpenetrating networks for tough matrix composites

Graphite fiber reinforced epoxy composites normally exhibit low impact strength, poor delamination resistance, and low damage tolerance. Because delamination is a matrix-dominated failure mode, tougher matrix resins may be utilized to reduce or eliminate the adverse effects of delamination on the structural integrity of fiber composites. The effects of modifying epoxy network morphology by introducing polyurethane in the form of an interpentrating network were studied. The compatibility, toughness, and tensile properties of the matrix as well as the properties of the resultant laminates were evaluated. One of the conclusions arising was that the interpenetrating network morphology results in superior resin and composites toughness with increasing polyurethane content. However, the benefits of increased resin toughness did not necessarily translate into proportionally increased composite owing to the geomertical limitations placed on the plastic deformation zones in laminates.     

Simulation of population balance model-based particulate processes via parallel and distributed computing

Population Balance Models (PBMs), a class of integro partial differential equations, are utilized for simulating dynamics of numerous particulate systems. PBMs describe the time evolutions and distributions of many particulate processes and their efficient and quick simulation are critical for enhanced process control and optimization, especially for real-time applications. However, their intensive computational resource requirement is largely a prohibitive factor in the utility of PBMs for control and optimization. This paper describes how distributed computing systems may be leveraged to execute PBM-based simulations thus achieving time savings, using MATLAB's Distributed Computing Toolbox. A parallel computing algorithm was developed for a three dimensional and four dimensional population balance model with built-in constructs such as SPMD that ran efficiently on a cluster of two quad-core machines linked via a gigabit ethernet cable. Speedup of 6.2 and 5.7 times were achieved with 8 workers, over an un-parallelized code, for a 3 and 4 dimensional PBM respectively. Evaluations on work efficiency and scalability further affirm the algorithms’ respectable performance on larger clusters despite significant memory transfer overheads.     

First and second law analyses of a typical solar air dryer system: a case study

This communication presents an experimental study based on energy and exergy analyses of a typical solar air dryer. On the basis of the experimental results, the first and the second law efficiencies are calculated with respect to the available solar radiation. It is found that the second law efficiency is much less than the first law efficiency irrespective of the mass flow rate of the circulating fluid. It is also found that both efficiencies are an increasing function with respect to the mass flow rate of the working fluid. For a particular day, it is also found that first and second law efficiencies fluctuate according to radiation. The results obtained in this article are found to be consistent with those obtained by earlier authors as given in the literature.     

Multi-electrode microbial fuel cell (MEMFC): A close analysis towards large scale system architecture

Microbial fuel cells are capable of producing electricity through the treatment of wastewater, however, the low power density poses main hurdles towards their wide application. In present work, microbial fuel cell based on multiple anodes, acting as baffle is constructed for achieving higher performance which can be scaled up for real life application. It is investigated for continuous sixty two days using distillery wastewater (WW) in three batches under ambient condition. During first batch, the WW is maintained under stagnant condition inside the anode chamber where as in the rest of the two batches WW is recirculated in the chamber. A maximum power density 427 mW m⁻², is achieved under stagnant condition which is further enhanced to 597 mW m⁻² under recirculation mode. Recirculation of WW reduces the internal resistance arising from the mass transfer by 50%. Maximum COD removal and Coulombic efficiency obtained is 43% and 23%. Biofouling on the surface of the membrane facing anode chamber is observed.     

Secure Key Agreement with Rekeying Using FLSO Routing Protocol in Wireless Sensor Network

Wireless Personal Communications - A challenge in wireless sensor network (WSN) is to design an energy efficient and secure network protocol because sensors are the wireless device with limited...     

Copper‐Catalyzed C–N,C–O Coupling Reaction of Arylglyoxylic Acids with Isatins

The copper(II)‐catalyzed decarboxylative coupling reactions of arylglyoxylic acids with isatins afford 4H‐benzo[d][1,3]oxazin‐4‐ones via decarbonylation and concurrent C–N, C–O bond formation.

     

Mechanical and thermal properties of wood fibers reinforced poly(lactic acid)/thermoplasticized starch composites

Thermoplasticized starch (TPS) filled poly(lactic acid) (PLA) blends are usually found to have low mechanical properties due to poor properties of TPS and inadequate adhesion between the TPS and PLA. The purpose of this study was to investigate the reinforcing effect of wood fibers (WF) on the mechanical properties of TPS/PLA blends. In order to improve the compatibility of wood with TPS/PLA blends, maleic anhydride grafted PLA (MA‐g‐PLA) copolymer was synthesized and used. TPS, TPS/PLA blends, and WF reinforced TPS/PLA composites were prepared by twin‐screw extrusion and injection molded. Scanning electron microscope and crystallinity studies indicated thermoplasticity in starch. WF at two different weight proportions, that is, 20% and 40% with respect to TPS content were taken and MA‐g‐PLA at 10% to the total weight was chosen to study the effect on mechanical properties. At 20% WF and 10% MA‐g‐PLA, the tensile strength exhibited 86% improvement and flexural strength exhibited about 106% improvement over TPS/PLA blends. Increasing WF content to 40% further enhanced tensile strength by 128% and flexural strength by 180% with respect to TPS/PLA blends. Thermal behavior of blends and composites was analyzed using dynamic mechanical analysis and thermogravimetric analysis. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46118.     

Iron(III)-mediated ATRP systems of n-docosyl acrylate with AIBN and BPO

Well-defined poly(n-docosyl acrylate) (PDA) with narrow molecular weight distribution has been synthesized by atom transfer radical polymerization (ATRP) and reverse ATRP of n-docosyl acrylate (DA) at 80 °C in N,N-dimethylformamide using the carbon tetrabromide/FeCl₃/2,2′-bipyridine (bpy) initiation system in the presence of 2,2′-azobisisobutyronitrile (AIBN) and benzoyl peroxide (BPO) as the source of reducing agent. The rates of polymerization for both the systems exhibit first-order kinetics with respect to the monomer, however, peroxide-initiated system shows slow rate of polymerization as compared to the azo-system. The effect of various reaction parameters on number average molecular weight (M _n ) and molecular weight distribution (M _w/M _n ) have been investigated. The resulting PDA that obtained in presence of AIBN and BPO systems has been compared for both the conventional and reverse ATRP. The reverse ATRP initiated by peroxides behaves differently than that of the azo initiators. In reverse ATRP with BPO, the rate of polymerization (R _p) has been significantly increased with the increase of BPO resulting higher M _n and broader M _w/M _n . The reverse ATRP of DA did not exhibit living characteristics with BPO system. PDA has been characterized by GPC, FTIR, and NMR spectroscopy.