Liquid phase growth of graphene on silicon carbide

We developed a novel method to produce graphene on silicon carbide (SiC) at a temperature as low as 1000 °C. The method is based on liquid phase growth (LPG) of graphene mediated by liquid gallium, which acts not only as a flux to store carbon dissolved from a surface of SiC when heated, but also as a catalyst to promote the formation of graphene on SiC when cooled. Our experimental results revealed that gallium-treated SiC substrates are coated with uniform and continuous graphene films. The LPG method is able to supply graphene films consisting of one to several hundreds of layers, depending on heating temperatures. Our approach can not only provide an alternative way to form graphene natively on SiC, but will also bring a technological breakthrough in industrial applications of graphene, e.g. the realization of graphene-on-insulator substrates.     

Serum and urine metal levels in patients with metal-on-metal surface arthroplasty

The resurgence of metal-on-metal articulating surfaces for hip arthroplasty has also heightened concerns about the degree and magnitude of metal particle generation and the accompanying increase in circulating metal ion concentrations. In this study, we measured the concentration of chromium in serum and urine and the concentration of cobalt in serum in twenty-five patients with modern metal-on-metal surface arthroplasty of the hip in a prospective manner. The results showed that the mean post-operative chromium in serum levels were 22-fold, 23-fold and 21-fold higher at 3, 6 and 12 months post-operative, respectively, than pre-operative levels. The mean post-operative cobalt in serum levels were 8-fold, 7-fold and 6-fold higher at 3, 6 and 12 months post-operative, respectively, than pre-operative levels. The mean post-operative chromium in urine levels were 9-fold, 10-fold and 14-fold higher at 3, 6 and 12 months post-operative, respectively, than pre-operative levels. The values seen in this study with the current generation of surface arthroplasties are: (a) lower than those seen in an earlier generation of surface arthroplasties; (b) in the same range as those observed in association with metal-on-metal conventional total hip replacements, which typically have smaller head sizes; (c) higher than values observed in patients with conventional metal-on-polyethylene articulating couples.     

Characterisation of properties of nickel in silicon using thermally stimulated capacitance method

Detailed TSCAP measurements on silicon P⁺N and N⁺P diodes confirm the existence of two acceptor levels of nickel lying 0.21 ± 0.01 and 0.41 ÷ 0.01 eV from the valence and conduction bands respectively. Concentration of these centers, their spatial distribution and behaviours after several annealing treatments are also presented.     

First data from the EGLE experiment onboard the ISS

EGLE is a wide frequency band search- coil magnetometer designed and built at the Roma Tre University. It has been installed onboard the ISS by the Italian astronaut Roberto Vittori on April 25, 2005 within the LAZIO- EGLE experiment carried out during the ENEIDE Soyuz mission. The scope of the experiment is to test EGLE in space and to investigate geomagnetic field variations. The main applications of EGLE are the study of electromagnetic environment inside the ISS, the correlation of magnetic field data with particle fluxes detected by LAZIO particle detector, and the monitoring of ionospheric perturbations possibly caused by Earth seismic activity. Since continuous electromagnetic field measurements on board the ISS are important for diverse space applications, a magnetometer with a suitable design is requested. Appropriate solutions for these applications, which have been adopted by EGLE, are in particular the use of 1- Wire technology and the possibility to detect by means of a search- coil magnetometer a large portion of the ULF frequency band, usually measured by flux- gate probes. To investigate the topside ionosphere electromagnetic environment and stability of Van Allen radiation belts in relation with seismic and anthropogenic electromagnetic emissions, a specific satellite mission (the ESPERIA project) has been designed for the Italian Space Agency (ASI), and up to now a few instruments of its payload have been built and tested in space. One of them is exactly the EGLE search- coil magnetometer. The first magnetic observations performed by this instrument reveal to be promising and demand for a further and deeper analysis based on a longer time series of data.     

Shallow Trench Isolation for the 45-nm CMOS Node and Geometry Dependence of STI Stress on CMOS Device Performance

In the present work, a high aspect ratio process (HARP) using a new O₃/TEOS based sub atmospheric chemical vapor deposition process was implemented as STI gapfill in sub-65-nm CMOS. Good gapfill performance up to aspect ratios greater than 10:1 was demonstrated. Since the HARP process does not attack the STI liner as compared to HDP, a variety of different STI liners can be implemented. By comparing HARP with HDP, the geometry dependence of nand p-FET performance due to STI stress is discussed     

Design of an enhanced access point to optimize TCP performance in Wi-Fi hotspot networks

In the last years, the number of Wi-Fi hotspots at public venues has undergone a substantial growth, promoting the WLAN technologies as the ubiquitous solution to provide high-speed wireless connectivity in public areas. However, the adoption of a random access CSMA-based paradigm for the 802.11 MAC protocol makes difficult to ensure high throughput and a fair allocation of radio resources in 802.11-based WLANs. In this paper we evaluate extensively via simulations the interaction between the flow control mechanisms implemented at the TCP layer and the contention avoidance techniques used at the 802.11 MAC layer. We conducted our study considering initially M wireless stations performing downloads from the Internet. From our results, we observed that the TCP downlink throughput is not limited by the collision events, but by the inability of the MAC protocol to assign a higher chance of accessing the channel to the base station. We propose a simple and easy to implement modification of the base station’s behavior with the purpose of increasing the TCP throughput reducing useless MAC protocol overheads. With our scheme, the base station is allowed to transmit periodically bursts of data frames towards the mobile hosts. We design a resource allocation protocol aimed at maximizing the success probability of the uplink transmissions by dynamically adapting the burst length to the collision probability estimated by the base station. By its design, our scheme is also beneficial to achieve a fairer allocation of the channel bandwidth among the downlink and uplink flows, and among TCP and UDP flows. Simulation results confirm both the improvement in the TCP downlink throughput and the reduction of system unfairness.     

Tobramycin Supplemented Small-Diameter Vascular Grafts for Local Antibiotic Delivery: A Preliminary Formulation Study

Peripheral artery occlusive disease is an emerging cardiovascular disease characterized by the blockage of blood vessels in the limbs and is associated with dysfunction, gangrene, amputation, and a high mortality risk. Possible treatments involve by-pass surgery using autologous vessel grafts, because of the lack of suitable synthetic small-diameter vascular prosthesis. One to five percent of patients experience vascular graft infection, with a high risk of haemorrhage, spreading of the infection, amputation and even death. In this work, an infection-proof vascular graft prototype was designed and manufactured by electrospinning 12.5% w/v poly-L-lactic-co-glycolic acid solution in 75% v/v dichloromethane, 23.8% v/v dimethylformamide and 1.2% v/v water, loaded with 0.2% w/w_PLGA. Polymer and tobramycin concentrations were selected after viscosity and surface tension and after HPLC-UV encapsulation efficiency (EE%) evaluation, respectively. The final drug-loaded prototype had an EE% of 95.58% ± 3.14%, with smooth fibres in the nanometer range and good porosity; graft wall thickness was 291 ± 20.82 μm and its internal diameter was 2.61 ± 0.05 mm. The graft’s antimicrobic activity evaluation through time-kill assays demonstrated a significant and strong antibacterial activity over 5 days against Staphylococcus aureus and Escherichia coli. An indirect cell viability assay on Normal Human Dermal Fibroblasts (NHDF) confirmed the cytocompatibility of the grafts.     

Ru-Containing Polymeric Catalysts for Cellulose Conversion to Polyols

In this paper Ru-containing catalysts based on hypercrosslinked polystyrene (MN-270) and its functional analogues (MN-100 and MN-500) were studied for the first time in cellulose hydrolytic hydrogenation. The catalysts were characterized using transmission electron microscopy (TEM), high resolution TEM, and porosity measurements. Catalytic studies demonstrated that the catalyst containing 1.0 % Ru and based on MN-270 is the most active. The total yield of sorbitol and mannitol was 50 % on the average at 85 % cellulose conversion.