Concrete Beams Exposed to Live Loading during Carbon Fiber Reinforced Polymer Strengthening

The need for structural rehabilitation of concrete structures all over the world is well known. Extensive amounts of research have been carried out and are ongoing in this field. Most of the laboratory research has been undertaken on structural elements without live load during the strengthening process. Normally owners of structures want to continue their activity or service during strengthening. Full-scale applications have shown that this is possible, but there is a lack of understanding as to how cyclic loads are distributed during strengthening; for example, traffic loads affect the final strengthening result. This paper presents laboratory tests on concrete beams strengthened with carbon fiber-reinforced polymer laminates and near-surface mounted reinforcement. The beams were subjected to a cyclic load during setting of the adhesive, and after additional hardening were then loaded by deformation control up to failure.     

1H-spectroscopic imaging with read gradient during acquisition in inhomogeneous fields: analysis, measurement strategy, and data processing

The proton magnetic resonance spectroscopic imaging techniques that use read gradient during acquisition produce proton spectra with high spatial and moderately high spectroscopic resolution in a reasonable time forin vivo applications. These techniques suffer mainly from the spatial and pectral distortions caused by the convolution of spectral/spatial information (chemical-shift artifacts) and from the spectral shifts caused by static magnetic field inhomogeneities. The investigators analyze the chemical-shift artifacts in the presence of nonnegligible static magnetic field inhomogeneities and propose a postdetection processing scheme to correct for such effects. Spectral artifacts caused by chemical shifts, spectral line overlapping, streak broadening, and magnetic field inhomogeneities are discussed. The postdetection data processing scheme is demonstrated on measurements of a phantom as well as a human leg. Supported by the Swedish Medical Research Council, project B-96-17x-006676-14A, and by Uppsala University are gratefully acknowledged. One of us (J.W.) is indebted to the Institute of Measurement Science, Slovak Academy of Sciences, for continuous support, VEGA Grant No. 95/5305/585,468 & 2/1207/96     

Control applications of nonlinear convex programming

Since 1984 there has been a concentrated effort to develop efficient interior-point methods for linear programming (LP). In the last few years researchers have begun to appreciate a very important property of these interior-point methods (beyond their efficiency for LP): they extend gracefully to nonlinear convex optimization problems. New interior-point algorithms for problem classes such as semidefinite programming (SDP) or second-order cone programming (SOCP) are now approaching the extreme efficiency of modern linear programming codes. In this paper we discuss three examples of areas of control where our ability to efficiently solve nonlinear convex optimization problems opens up new applications. In the first example we show how SOCP can be used to solve robust open-loop optimal control problems. In the second example, we show how SOCP can be used to simultaneously design the set-point and feedback gains for a controller, and compare this method with the more standard approach. Our final application concerns analysis and synthesis via linear matrix inequalities and SDP.     

Open Embedded Control

Embedded control devices today usually allow parameter changes, and possibly activation of different pre-implemented algorithms. Full reprogramming using the complete source code is not allowed for safety, efficiency, and proprietary reasons. For these reasons, embedded regulators are quite rigid and closed concerning the control structure. In several applications, like industrial robots, there is a need to tailor the low level control to meet specific application demands. In order to meet the efficiency and safety demands, a way of building more generic and open regulators has been developed. The key idea is to use pieces of compiled executable code as functional operators, which in the simplest case may appear as ordinary control parameters. In an object oriented framework, this means that new methods can be added to controller objects after implementation of the basic control, even at run-time. The implementation was carried out in industrially well accepted languages such as C and C++. The dynamic binding at run-time differs from ordinary dynamic linking in that only a subset of the symbols can be used. This subset is defined by the fixed part of the system. The safety demands can therefore still be fulfilled. Encouraged by results from fully implemented test cases, we believe that extensive use of this concept will admit more open, still efficient, embedded systems.     

Local effects in the vicinity of inserts in sandwich panels

The paper considers local bending effects induced in the vicinity of inserts in sandwich panels. Such local bending effects are associated with an increase of bending stresses in the sandwich faces and normal and shear stresses in the sandwich core. An earlier developed analytic model [Proceedings of the Sixth International Conference on Sandwich Structures (ICSS-6) (2002) 551] is adapted for the case of a sandwich panel with circular insert, with elastic properties differing from those of the core. The locally induced stresses in the faces and core due to presence of the insert are expressed via simple analytic relations (and charts) enabling an estimation of these local stresses. Finite element analysis is employed to demonstrate the applicability of the analytic model, and a good correspondence between the numerical and the analytical data is found. A study case related to marine applications, namely a circular insert in a sandwich deck panel used for mounting of a rigging fixture, is considered, and optimization of an existing design is carried out.     

Subjective Probability Intervals: How to Reduce Overconfidence by Interval Evaluation.

Format dependence implies that assessment of the same subjective probability distribution produces different conclusions about over- or underconfidence depending on the assessment format. In 2 experiments, the authors demonstrate that the overconfidence bias that occurs when participants produce intervals for an uncertain quantity is almost abolished when they evaluate the probability that the same intervals include the quantity. The authors successfully apply a method for adaptive adjustment of probability intervals as a debiasing tool and discuss a tentative explanation in terms of a naive sampling model. According to this view, people report their experiences accurately, but they are naive in that they treat both sample proportion and sample dispersion as unbiased estimators, yielding small bias in probability evaluation but strong bias in interval production. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Reconstruction of General Curves,Using Factorization and Bundle Adjustment

In this paper, we extend the notion of affine shape, introduced by Sparr, from finite point sets to curves. The extension makes it possible to reconstruct 3D-curves up to projective transformations, from a number of their 2D-projections. We also extend the bundle adjustment technique from point features to curves.The first step of the curve reconstruction algorithm is based on affine shape. It is independent of choice of coordinates, is robust, does not rely on any preselected parameters and works for an arbitrary number of images. In particular this means that, except for a small set of curves (e.g. a moving line), a solution is given to the aperture problem of finding point correspondences between curves. The second step takes advantage of any knowledge of measurement errors in the images. This is possible by extending the bundle adjustment technique to curves.Finally, experiments are performed on both synthetic and real data to show the performance and applicability of the algorithm.     

Misidentification of Vibrio cholerae O155 isolated from imported shrimp as O serogroup O139 due to cross-agglutination with commercial O139 antisera

Fish and shellfish products imported into Denmark are routinely analyzed for pathogenic Vibrio spp., particularly Vibrio cholerae, if products originate from subtropical or tropical areas. A V. cholerae strain that agglutinated commercial O139 antiserum but not the O1, Inaba, or Ogawa antisera was isolated from imported raw frozen shrimp. The toxigenicity of the strain was analyzed, and the results of a polymerase chain reaction showed that the V. cholerae strain did not contain the virulence genes ctx, tcpA, and zot, which are normally found in V. cholerae O1 and O139. The strain was resistant to colistin and spectinomycin. The high susceptibility of the strain to antimicrobial agents was confirmed by the lack of an SXT element, a self-transmissible, chromosomal genetic element that is normally present in 0139 strains and encodes resistance to sulfonamides, trimethoprim, and streptomycin. The strain contained two plasmids, in contrast to other O139 strains, which normally do not contain plasmids. The characteristics of the strain led to further agglutination testing with other antisera that are not commercially available, and the strain was found to agglutinate O155 antiserum in repeated testing. Manufacturers of 0139 antiserum should be aware of the closely related O antigens of the O139, O22, and O155 serogroups and should be aware that their commercial diagnostic O139 antiserum must be absorbed to remove cross-reacting agglutinins of O22 and O155 strains.     

Effect of preheating on potato texture

Preheating potatoes at 50 to 80°C has a firming effect on the cooked potato tissue. This effect is particularly pronounced at a preheating temperature of 60 to 70°C followed by cooling. Several theories have been presented in the literature to explain this firming effect: retrogradation of starch, leaching of amylose, stabilization of the middle lamellae and cell walls by the activation of the pectin methylesterase (PME) enzyme, and by the release of calcium from gelatinized starch and the formation of calcium bridges between pectin molecules. Most probably, none of these theories alone can explain the phenomenon and more than one mechanism seems to be involved. Some of these mechanisms seem to be interdependent. As an example, calcium could be considered as a link all the way through release after starch gelatinization to cross‐linking pectin substances in the cell wall and the middle lamellae, which has been demethylated by the PME enzyme. More research and “clear cut” experiments are needed in order to elucidate the role of each mechanism, especially which of them is the main contributor to the process of firming. Most probably, the calcium‐pectin‐PME mechanism plays a secondary role, that is, it only retards the collapse of the tissue structure that would otherwise occur during the final heating without preheating, and it is not the main factor of firmness.