Purification of Biorefinery Lignin with Alcohols

After hydrothermal pretreatment and enzymatic hydrolysis of wheat straw, a slurry rich in lignin but with a high content of inorganic substances, especially silica, and residual carbohydrates is produced. This slurry was used to develop an ethanol organosolv separation method to produce silica-free lignin fractions. The addition of para toluene sulphonic acid (PTSA) and the use of two alternative long-chain alcohols, oleyl alcohol or nonylphenol, were tested. In every reaction, two lignin fractions were produced and their molecular size and elemental composition were characterized. The yield of each fraction and the change in MWD were studied as a function of temperature and solid to liquid ratio. At 100, 150, and 200°C and with the use of PTSA, high-purity lignin fractions were obtained. After lignin fractionation with nonylphenol, a liquid silica-free product with high lignin content was obtained in yields between 17 and 72%.     

Optimal control and the Pontryagin's principle in chemical engineering: History,theory, and challenges

In the mid-1950s, Pontryagin et al. published a principle that became a fundamental concept in optimal control (OC) theory. The principle provides theoretical and practical methods to find the solution of OC problems, in particular, open-loop control problems. In chemical engineering, the principle has played an important role as a decision making framework for more than 60 years. This study gathers the main contributions on the application of the Pontryagin's principle to the dynamic optimization of chemical processes. A concise overview of the optimality conditions for a wide class of constrained OC problems is provided. Numerical methods to solve the necessary conditions and strategies to address inequality constraints are summarized. The information and illustrative case study presented in this work can be used as a guide to implement the principle in different settings. Opportunities for further application of the principle in relevant chemical engineering problems are also discussed.     

A nested online scheduling and nonlinear model predictive control framework for multi-product continuous systems

In the pursuit of integrated scheduling and control frameworks for chemical processes, it is important to develop accurate integrated models and computational strategies such that optimal decisions can be made in a dynamic environment. In this study, a recently developed switched system formulation that integrates scheduling and control decisions is extended to closed-loop operation embedded with nonlinear model predictive control (NMPC). The resulting framework is a nested online scheduling and control loop that allows to obtain fast and accurate solutions as no model reduction is needed and no integer variables are involved in the formulations. In the outer loop, the integrated model is solved to calculate an optimal product switching sequence such that the process economics is optimized, whereas in the inner loop, an NMPC implements the scheduling decisions. The proposed scheme was tested on two multi-product continuous systems. Unexpected large disturbances and rush orders were handled effectively.     

Thermal Analysis of Charcoal from Fast-Growing Eucalypt Wood: Influence of Raw Material Moisture Content

This study aimed to investigate the influence of raw material moisture content on the properties of charcoal from fast-growing Eucalyptus benthamii wood. For that, three treatments were performed with 0, 30, and 50% in relation to the wet basis moisture of the wood samples. The carbonization process used an electric kiln with a heating rate of 1.60°C min^?1, initial temperature of 25 to 600°C at the end, kept constant at that temperature for two hours. Variables were statistically analyzed for charcoal yield, non-condensable gases, liquor, and fixed carbon and properties: fixed carbon content, volatile, ash, bulk density, and moisture content of charcoal. According to the results, the charcoal produced from dry wood presented the highest properties, yet the charcoal produced from wood with 30% moisture content showed similar properties.     

Integrating superstructure-based design of molecules,processes, and flowsheets

The key to many chemical and energy conversion processes is the choice of the right molecule, for example, used as working fluid. However, the choice of the molecule is inherently coupled to the choice of the right process flowsheet. In this work, we integrate superstructure-based flowsheet design into the design of processes and molecules. The thermodynamic properties of the molecule are modeled by the PC-SAFT equation of state. Computer-aided molecular design enables considering the molecular structure as degree of freedom in the process optimization. To consider the process flowsheet as additional degree of freedom, a superstructure of the process is used. The method results in the optimal molecule, process, and flowsheet. We demonstrate the method for the design of an organic Rankine cycle considering flowsheet options for regeneration, reheating, and turbine bleeding. The presented method provides a user-friendly tool to solve the integrated design problem of processes, molecules, and process flowsheets.     

Observation of oxygen pyramid tilting induced polarization rotation in strained BiFeO3 thin film

Oxygen octahedral tilting has been recognized to strongly interact with spin, charge, orbital, and lattice degrees of freedom in perovskite oxides. Here, we observe a strain-driven stripe-like morphology of two supertetragonal (monoclinic Cc and Cm ) phases in the strained BiFeO₃/LaAlO₃ thin films. The two supertetragonal phases have a similar giant axial ratio but differences in oxygen pyramid tilting mode. Especially, the competition between polar instability and oxygen pyramid tilting is identified using atomically resolved scanning transmission electron microscopy, leading to the polarization rotation across the phase boundary. In addition, microtwins are observed in the Cc phase. Our findings provide new insights of the coupling between ferroelectric polarization and oxygen pyramid tilting in oxide thin films and will help to design novel phase morphology with desirable ferroelectric polarization and properties for new applications in perovskite oxides.     

Margarine-Like Emulsions Prepared with Coconut and Palm Oils: Analysis of Microstructure and Freeze–Thaw Stability by Differential Scanning Calorimetry

The objective was to study the microstructure and freeze–thaw stability of margarine-like emulsions formulated with vegetable fats using differential scanning calorimetry. Emulsions were prepared with 20% w/w dispersed aqueous phase and a continuous lipid phase composed by coconut oil (CO) and/or palm oil (PO) plus polyglycerol polyricinoleate (PGPR) as emulsifier. Mean temperature (T_M) and crystallization enthalpy (ΔH_c) were obtained from the exothermic peaks corresponding to freezing of aqueous phase. Successive cooling–heating–cooling cycles were applied to analyze changes in the exothermic peak. The emulsion prepared with CO (without PO) and 1% w/w PGPR in lipid phase showed higher water droplets size (T_M = −44.8 ± 0.1 °C) and lower quantity of stabilized aqueous phase (ΔH_c = 28.9 ± 1.2 J g⁻¹) prior to application of temperature cycles, while coalescence and (presumably) water transfer processes occurred during the treatment. The use of 2% w/w PGPR was sufficient to accomplish full stabilization of aqueous phase (T_M = −45.9 ± 0.1 °C; ΔH_c = 42.6 ± 0.3 J g⁻¹) before and after the freeze–thaw treatment. The total or partial (50%) substitution of CO by PO in emulsions with 1% w/w PGPR also improved the stability of the system, exhibiting slight microstructural changes. This enhanced stability would be linked to reduced water droplets size because of more rapid crystallization of lipid phase and immobilization of aqueous phase after emulsion preparation. In conclusion, it is possible to obtain margarine-like emulsions prepared with CO and/or PO using relatively low emulsifier concentration and maintaining a desired microstructure after freeze-thawing if the percentage ratio of both fats is controlled.     

Black Sand-Based Photocatalyst for Hydrogen Production from EDTA Solutions Under UV–Vis Irradiation

Topics in Catalysis - Black sand from coastal deposits composed by a mixture containing oxides (Fe2O3, TiO2, SiO2, ZrO2, MnO, Al2O3, etc.) and metals (V, Cr, Ni, Sr, Ce, etc.). Both this mineral,...     

Melt processing of ethylene–vinyl acetate/banana starch/Cloisite 20A organoclay nanocomposite films: structural,thermal and composting behavior

This work shows the preparation of ethylene vinyl acetate copolymer/banana starch/Cloisite 20A organoclay (EVA/starch/C20A) nanocomposites by melt processing. Wide angle X-ray diffraction (WAXD), field emission scanning electron microscopy (FE-SEM), differential scanning calorimetry and thermogravimetric analysis were used to characterize the obtained nanocomposites. Mechanical properties were also determined. In addition, the performance of the nanocomposite films under composting was preliminarily studied; it was conducted using the soil burial test method. Despite knowing that the starch is difficult to process by extrusion, nanocomposite films with high homogeneity were obtained. In this case, C20A organoclay acts as an effective surfactant to make the starch natural polymer compatible with the EVA synthetic polymer. The good compatibility between EVA, starch and C20A clay was also deduced by the formation of intercalated and intercalated-exfoliated structures determined by WAXD and FE-SEM. Physical evidence of the damage in EVA/starch/C20A nanocomposite films after the composting test was observed. It is worth noting that despite the absence of starch, the EVA/C20A nanocomposite film, used as a control, also showed surface damage. This behavior is related to the organic modifier linked to clay C20A, which contains molecules derived from fatty acids that can be used as a food source for microorganisms.