Relationship between solar radiation and surface distribution of vegetation in Fildes Peninsula and Ardley Island,Maritime Antarctica

The aim of this work is to produce a simplified vegetation map of ice-free areas of the Fildes Peninsula (FP) and Ardley Island (AI) thought object-oriented classification using a QuickBird satellite image and to evaluate the influence of the global solar radiation (GSR) over the vegetation distribution. The vegetation data were generated from multiresolution segmentation using the panchromatic and infrared layers, and for the classification we calculated the normalized vegetative difference index (NVDI) and the green NVDI. Two classes were created – Lichen and Moss Cushion SubFormation and Moss Subformation – with 48 vegetation samples collected on surveys during the austral summers of 2008 and 2009. We used a kappa index to evaluate the classification efficiency using 100 sampled points obtained in austral summer of 2013. The GSR was estimated, and in order to evaluate the effect of meteorological phenomena and cloudless, we measured the GSR using a net radiometer model CNR4 installed in FP between 2014 and 2016. The estimate of GSR was done for seasons of 2015, in order to estimate the light compensation point and the saturation point for the plant communities in FP and AI. The kappa index was 0.73 and the global accuracy was 0.78, showing consistency between the classification and ground truth. The area was covered by vegetation in FP was 16.7% and in AI is 59.1%. The vegetation cover is distributed differently at FP and AI, and our results suggest GSR plays an important role in vegetation distribution and these tendencies could be related to greater GSR demand by mosses when compared to lichens.     

Effect of height on the corrosion of steel and galvanized steel in nontropical coastal marine environments

In this study, the behavior of carbon steel and galvanized steel in nontropical coastal marine environments was evaluated. Evaluation was carried out with specimens with dimensions of 10 cm × 10 cm × 0.3 cm. These specimens were exposed to four testing stations (Iquique, Mejillones, Los Vilos, and San Vicente), where racks were installed both at ground level (ground), as well as in the upper zone of electrical transmission towers (tower). In each station, 24 specimens of A36 carbon steel and galvanized steel were placed (12 each). The corrosivity of the environment was measured using the ISO 9223, 9225, and 9226 standards. The specimens were evaluated on-site, monthly, through visual inspection and photographic record. Once withdrawn, the corrosion rate was determined and the corrosion products were analyzed through Raman and Fourier-transform infrared. The results show that, in all cases, the corrosion rate is greater in the tower than on the ground. However, even though the Los Vilos station is located farther from the sea (3,500 vs. ≈500 m), the corrosion rate of steel in the tower is the highest. This is caused by the generation of HCl from the transformation of lepidocrocite into goethite, in the presence of low chloride content, which acidifies the steel/corrosion product interface. In the case of galvanized steel, the corrosion rate is a function of the chloride content in the atmosphere, obtaining an excellent correlation between both parameters.     

Influence of different wood flour fractions on the mechanical properties of injection molded WPC with cellulose propionate

This research investigated the effect of different fractions of commercial wood flour (Type c100 from JRS, Germany) on mechanical and physical properties of wood-polymer composites (WPC). The fractions were named regarding the mean lengths of their particles in µm; 80, 130, 255, 405 and 485. The composite samples were manufactured with 30 wt% of wood flour fractions of all five groups as well as the not fractionated flour, and 70 wt% of cellulose propionate (CP). The melt mass-flow rate (MFR) of the different granules, tensile strength, and modulus of elasticity, flexural strength, flexural modulus and the impact strength of the injection molded specimens as well as the water uptake were determined in this study. WPCs with the specific size range used in this investigation exhibited improved strength and modulus of elasticity in tensile and flexural tests, compared to pure CP. Using fraction 255, the mechanical properties increased the most. Tensile strength rose by 28 and 13% compared to CP and to WPC with the not fractioned wood powder, respectively. Fraction 255 increased flexural strength by 33 and 5% compared to CP and WPC with the not fractioned flour. The MFR (tested at 190 °C with 7.16 kg) of WPC_255 is the lowest with 2.3 g/10 min. Composites with the smallest particles showed the least water uptake.     

Infiltration Capacity Assessment of Urban Pavements Using the LCS Permeameter and the CP Infiltrometer

This paper presents the Cantabrian portable infiltrometer (CP infiltrometer), a specially designed device based on rainfall simulation for the assessment of the infiltration capacity of all types of urban pavements. Several pervious and impervious surfaces were tested with the LCS permeameter, an existing infiltration test based on the use of a column of water, and the CP Infiltrometer, simulating rain intensities with return periods of 10, 50, and 500 years and 5?min duration. The discussion of the results indicates that the CP infiltrometer could be used successfully to identify different levels of infiltration capacity and to assess the correct performance of pervious surfaces on which design, construction, and maintenance decisions are based.     

Azaaurones as Potent Antimycobacterial Agents Active against MDR- and XDR-TB

Herein we report the screening of a small library of aurones and their isosteric counterparts, azaaurones and N-acetylazaaurones, against Mycobacterium tuberculosis. Aurones were found to be inactive at 20 μm , whereas azaaurones and N-acetylazaaurones emerged as the most potent compounds, with nine derivatives displaying MIC₉₉ values ranging from 0.4 to 2.0 μm . In addition, several N-acetylazaaurones were found to be active against multidrug-resistant (MDR) and extensively drug-resistant (XDR) clinical M. tuberculosis isolates. The antimycobacterial mechanism of action of these compounds remains to be determined; however, a preliminary mechanistic study confirmed that they do not inhibit the mycobacterial cytochrome bc1 complex. Additionally, microsomal metabolic stability and metabolite identification studies revealed that N-acetylazaaurones are deacetylated to their azaaurone counterparts. Overall, these results demonstrate that azaaurones and their N-acetyl counterparts represent a new entry in the toolbox of chemotypes capable of inhibiting M. tuberculosis growth.     

From stochastic single atomic switch to nanoscale resistive memory device

We study the switching characteristics of nanoscale junctions created between a tungsten tip and a silver film covered by a thin ionic conductor layer. Atomic-sized junctions show spectacular current induced switching characteristics, but both the magnitude of the switching voltage and the direction of the switching vary randomly for different junctions. In contrast, somewhat larger junctions with diameters of a few nanometres display a well defined, reproducible switching behavior attributed to the formation and destruction of nanoscale channels in the ionic conductor surface layer. Our results define a lower size limit of 3 nm for reliable ionic nano-switches, which is well below the resolution of recent lithographic techniques.     

Assorted analytical and spectroscopic techniques for the optimization of the defect-related properties in size-controlled ZnO nanowires

In this article, the important role of the intrinsic defects in size-controlled ZnO nanowires (NWs) which play a critical role in the properties of the NWs, was studied with a combined innovative experimental analysis. The NWs prepared by both the aqueous solution method and chemical vapour deposition process were of increasing length and decreasing size-to-volume (S/V) ratio. The combined approach involved different analytical and spectroscopic techniques and from the correlation between the different measurements, the concentration of the oxygen vacancies jointly with the zinc interstitials defects and the zinc vacancy defects was observed to be positively or negatively correlated, respectively, with the magnitude of the photoluminescence intensity and radiative lifetimes. Furthermore, the experimental results also suggest that the oxygen vacancy defects are not only spatially located on the surface of the NW but an increasing fraction of the total oxygen vacancy defects connected with the green emission is also located in an annulus region beneath the surface as the ZnO NWs elongate. On the other hand, as the donor concentration plays a critical function in the properties of the ZnO NWs, an analytical model was derived for the calculation of the donor concentration of the NWs directly from its reverse-biased current-voltage characteristics obtained from the conductive atomic force microscopy measurements.     

Synthesis and Evaluation of the Anticancer and Trypanocidal Activities of Boronic Tyrphostins

Molecules containing an (cyanovinyl)arene moiety are known as tyrphostins because of their ability to inhibit proteins from the tyrosine kinase family, an interesting target for the development of anticancer and trypanocidal drugs. In the present work, (E)‐(cyanovinyl)benzeneboronic acids were synthesized by Knoevenagel condensations without the use of any catalysts in water through a simple protocol that completely avoided the use of organic solvents in the synthesis and workup process. The in vitro anticancer and trypanocidal activities of the synthesized boronic acids were also evaluated, and it was discovered that the introduction of the boronic acid functionality improved the activity of the boronic tyrphostins. In silico target fishing with the use of a chemogenomic approach suggested that tyrosine‐phosphorylation‐regulated kinase 1a (DYRK1A) was a potential target for some of the designed compounds.     

Management scenarios for olive oil mill waste based on characterization and leaching tests

BACKGROUND: Olive oil mill waste is a serious environmental problem in the Mediterranean basin given its particular characteristics of high organic content, seasonal and localized generation, and the type of processing involved. RESULTS: Olive mill waste from a three‐phase mill was characterized by means of total analysis, availability and mobility of the pollutants in order to help the decision‐maker about possible options for its valorization and/or disposal. Water content, loss of ignition, total organic carbon, phenol index and metals concentrations were measured to fully characterize the waste. Three leaching tests (NEN 7341, EN 12457 and UNE CEN‐TS 15364 EX) were carried out to evaluate the environmental hazard of the waste material and the leachates were characterized with respect to electric conductivity, pH, heavy metals, anions and organic pollutants (phenol index and total organic carbon) according to European waste directives. The results were compared with EU regulations for inert, non‐hazardous and hazardous waste disposal. CONCLUSION: It was found that not only organic parameters must be taken into account concerning the fate of this waste material, but also the mobility of heavy metals and anions should be studied. Furthermore, stabilization/solidification processes are recommended before landfill disposal of this kind of agro‐waste material. Copyright © 2011 Society of Chemical Industry