All-conjugated block copolymers

All-conjugated block copolymers of the rod-rod type came into the focus of interest because of their unique and attractive combination of nanostructure formation and electronic activity. Potential applications in a next generation of organic polymer materials for photovoltaic devices ("bulk heterojunction"-type solar cells) or (bio)sensors have been proposed. Combining the fascinating self-assembly properties of block copolymers with the active electronic and/or optical function of conjugated polymers in all-conjugated block copolymers is, therefore, a very challenging goal of synthetic polymer chemistry. First examples of such all-conjugated block copolymers from a couple of research groups all over the world demonstrate possible synthetic approaches and the rich application potential in electronic devices. A crucial point in such a development of novel polymer materials is a rational control over their nanostructure formation. All-conjugated di- or triblock copolymers may allow for an organization of the copolymer materials into large-area ordered arrays with a length scale of nanostructure formation of the order of the exciton diffusion length of organic semiconductors (typically ca. 10 nm). Especially for amphiphilic, all-conjugated copolymers the formation of well-defined supramolecular structures (vesicles) has been observed. However, intense further research is necessary toward tailor-made, all-conjugated block copolymers for specific applications. The search for optimized block copolymer materials should consider the electronic as well as the morphological (self-assembly) properties.     

Electrocombustion of humic acid and removal of algae from aqueous solutions

This paper reports experiments involving the electrochemical combustion of humic acid (HA) and removal of algae from pond water. An electrochemical flow reactor with a boron-doped diamond film anode was used and constant current experiments were conducted in batch recirculation mode. The mass transfer characteristics of the electrochemical device were determined by voltammetric experiments in the potential region of water stability, followed by a controlled current experiment in the potential region of oxygen evolution. The average mass transfer coefficient was 5.2 × 10⁻⁵ m s⁻¹. The pond water was then processed to remove HA and algae in the conditions in which the reaction combustion occurred under mass transfer control. To this end, the mass transfer coefficient was used to estimate the initial limiting current density applied in the electrolytic experiments. As expected, all the parameters analyzed here—solution absorbance at 270 nm, total phenol concentration and total organic carbon concentration—decayed according to first-order kinetics. Since the diamond film anode successfully incinerated organic matter, the electrochemical system proved to be predictable and programmable.     

In situ FTIR spectroelectrochemistry of poly[2-(3-thienyl)ethyl acetate] and its hydrolyzed derivatives

Poly[2-(3-thienyl)ethyl acetate] (PTEtAc) was chemically synthesized and transformed to partially hydrolyzed PTEtAc (PTEtAcOH) and poly[2-(3-thienyl)ethanol] (PTEtOH). The influence of the acetoxy and hydroxyl terminal functionalities in the side groups on the electrochemical properties of these polyalkylthiophenes was studied by cyclic voltammetry and in situ FTIR spectroelectrochemistry. The cyclic voltammograms point to a chemically reversible behaviour of the p-doping process for PTEtAc and PTEtAcOH, while for PTEtOH the redox activity of the polymer film is lost during consecutive potential scans.The attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR) was used to investigate the p-doping of the three different type of thiophene polymer films. In situ FTIR spectra taken at different electrode potentials in a cyclovoltammetric scan display the doping induced changes of the polymer pattern. Important differences in the behaviour of the polymers were observed and interpreted in terms of different film structures.     

Functionalization of Si(1 0 0) with ferrocene derivatives via “click” chemistry

We prepared ferrocene-modified silicon surfaces through a three-step procedure consisting of the photochemical anchoring of 11-bromo-1-undecene on H-Si(1 0 0), followed by treatment with NaN₃ and by a reaction with ethynylferrocene via azide-alkyne Huisgen cycloaddition reaction, also known as “click” chemistry. The advantages of this approach are multiple: the synthetic approach is flexible, provided a CC tethering arm is present on the molecule of interest; a self-assembled hydrocarbon chain can guarantee a good coverage and resistance to the further synthetic steps; the redox centers are located at the outer surface, where a good contact with the electrolyte becomes possible. We have monitored the progression of the reaction steps by XPS, and characterized the resulting new hybrid on Si by electrochemical methods. The presence and chemical nature of the redox species covalently attached to the SAM on Si has been evaluated by XPS, while the overall coverage has been calculated by CV measurements. A reversible electrochemical response has been evidenced for the hybrids and the progressive ageing followed at thousands of oxidation-reduction cycles.     

Nucleic acid amplification of individual molecules in a microfluidic device

A microfluidic device was developed that enabled rapid polymerase chain reaction (PCR) analysis of individual DNA molecules. The device combined a means for accessing samples serially from a microtiter plate, channels for assembling eight parallel PCR reactions, and integrated resistive heaters for rapid thermocycling (>5 degrees C/s heating, >7 degrees C/s cooling) of samples as they flowed continuously through PCR channels. Amplification was monitored by fluorescence detection of Taqman probes. The long, narrow channels (10 microm x 180 microm x 40 mm) allowed sufficient separation between neighboring DNA templates to enable amplification of discreet DNA molecules. The functionality of the device was demonstrated by reproducibly amplifying a 2D6.6 CYP450 template and distinguishing between wild-type and mutant sequences using Taqman probes. A comparison of the rate of individual amplification events to the expected Poisson distribution confirmed that the device could reliably analyze individual DNA molecules. This work establishes the feasibility of rapid, single-molecule interrogation of nucleic acids.     

Dynamic infrared study of polyphenylene sulfide using planar array infrared spectroscopy

Planar array infrared (PA-IR) spectroscopy was used to study polyphenylene sulfide (PPS) at room temperature during the application of a sinusoidal elastic deformation. All of the intensity in the dynamic spectra was contained within the in-phase spectrum, which was expected since the measurements were carried out at room temperature, far below the glass transition temperature. The contributions of chain orientation, sample thinning, and stress-induced band shifts were separated in the dynamic spectra. It was found that the effects of chain orientation and sample thinning canceled each other out. Stress-induced band shifts far below the spectral resolution, on the order of 0.01 cm(-1), were quantified and used to calculate the stress optical coefficients and mode Gruneisen parameters for PPS.     

Influence of the crack morphology on the fatigue crack growth rate: A continuously-kinked crack model based on fractals

Threshold condition and rate of fatigue crack growth appear to be significantly affected by the degree of deflection of cracks. In the present paper, the reduction of the fatigue crack growth rate for a so-called ‘periodically-kinked crack’ as compared to that for a straight counterpart is quantified via the Paris–Erdogan law modified according to some simple theoretical arguments. It is shown that such a reduction increases as the value of the kinking angle increases. Then, a so-called ‘continuously-kinked crack’ (the kink length tends to zero) is considered and modelled as a self-similar invasive fractal curve. The sequence of kinking angles in the crack is such that the fatigue crack path is ‘on average’ straight. Using the Richardson’s expression for self-similar fractals, the fractal dimension of the crack is expressed as a function of the kinking angle. It is shown that the fatigue crack growth rate in the Paris range depends not only on the above fractal dimension and in turn on the kinking angle, but also, in an explicit fashion, on the crack length. Some experimental results related to concrete and showing a crack size effect on the fatigue crack growth rate are analysed.     

Synthesis and Biological Evaluation of CTP Synthetase Inhibitors as Potential Agents for the Treatment of African Trypanosomiasis

Acivicin analogues with an increased affinity for CTP synthetase (CTPS) were designed as potential new trypanocidal agents. The inhibitory activity against CTPS can be improved by increasing molecular complexity, by inserting groups able to establish additional interactions with the binding pocket of the enzyme. This strategy has been pursued with the synthesis of α‐amino‐substituted analogues of Acivicin and N1‐substituted pyrazoline derivatives. In general, there is direct correlation between the enzymatic activity and the in vitro anti‐trypanosomal efficacy of the derivatives studied here. However, this cannot be taken as a general rule, as other important factors may play a role, notably the ability of uptake/diffusion of the molecules into the trypanosomes.     

Confocal ultrafast pump-probe spectroscopy: a new technique to explore nanoscale composites

This article is devoted to the exploration of the benefits of a new ultrafast confocal pump-probe technique, able to study the photophysics of different structured materials with nanoscale resolution. This tool offers many advantages over standard stationary microscopy techniques because it directly interrogates excited state dynamics in molecules, providing access to both radiative and non-radiative deactivation processes at a local scale. In this paper we present a few different examples of its application to organic semiconductor systems. The first two are focussed on the study of the photophysics of phase-separated polymer blends: (i) a blue-emitting polyfluorene (PFO) in an inert matrix of PMMA and (ii) an electron donor polythiophene (P3HT) mixed with an electron acceptor fullerene derivative (PCBM). The experimental results on these samples demonstrate the capability of the technique to unveil peculiar interfacial dynamics at the border region between phase-segregated domains, which would be otherwise averaged out using conventional pump-probe spectroscopy. The third example is the study of the photophysics of isolated mesoscopic crystals of the PCBM molecule. Our ultrafast microscope could evidence the presence of two distinctive regions within the crystals. In particular, we could pinpoint for the first time areas within the crystals showing photobleaching/stimulated emission signals from a charge-transfer state.