Microchip technology for automated and parallel patch-clamp recording

The patch-clamp technique is the state-of-the-art technology for the study of a large class of membrane proteins called ion channels. Ion channels mediate electrical current flow, have crucial roles in cellular physiology, and are important drug targets. However, patch clamping is a laborious process requiring a skilled experimenter and is, therefore, not compatible with the high throughput needed in drug development. The solution for automated and parallel patch-clamp measurements that is provided by microchip technology is presented here.     

Extravascular lung water index: a new method to determine dry weight in chronic hemodialysis patients

To assess the dry weight of chronic hemodialysis (HD) patients, the extravascular lung water index (ELWI) as a volume parameter was investigated to identify fluid overload. Forty-two patients (30 males, 12 females) with a mean age of 55.7+/-13.0 years who were clinically not overhydrated were connected to the PiCCO system before starting HD treatment. We determined ELWI (normal range 3-7 mL/kg) and the following parameters: global end-diastolic volume index (GEDI, normal range 680-800 mL/m(2)) and intrathoracic blood volume index (ITBI, normal range 850-1000 mL/m(2)) before and after HD to assess the volume status. Brain natriuretic peptide (BNP), aldosterone, and renin as vasoactive hormones were measured at the beginning and at the end of HD treatment as well. In 28 of the 42 patients (67%), elevated values of ELWI were found, indicating interstitial volume overload. There were significant correlations between ELWI and cardiac function index (p=0.003; Pearson's coefficient -0.451), global ejection fraction (p=0.012; Pearson's coefficient -0.389), ITBI (p=0.004; Pearson's coefficient 0.437), and GEDI (p=0.004; Pearson's coefficient 0.437). No significant relations among ELWI and mean arterial pressure (MAP), BNP, aldosterone, and renin were found. In conclusion, the use of ELWI is safe in chronic HD patients and identifies fluid-overloaded patients, who show no obvious signs of hypervolemia. The determination of ELWI is an excellent method to quantify the exact volume in chronic HD patients.     

Nanoparticles from polylactide and polyether block copolymers: formation, properties, encapsulation, and release of pyrene--fluorescent model of hydrophobic drug

Polylactide-b-polyglycidol-b-poly(ethylene oxide) terpolymers and their derivatives with carboxyl and 4-(phenylazo)phenyl labels in polyglycidol blocks were used for formation of nanoparticles. Nanoparticles were produced by self assembly of terpolymer macromolecules in water above the critical aggregation concentration and by dialysis of terpolymer solutions in 1,4-dioxane against water. For terpolymers with 4-(phenylazo)phenyl labels critical aggregation concentrations increased after irradiation with UV light (300 < lambda < 400 nm) inducing conformational change of the label from trans- to cis-conformation. Diameters of nanoparticles obtained by self-assembly of macromolecules ranged from 20 to 44 nm. Dialysis yielded nanoparticles with bimodal diameter distribution. One fraction had diameters below 35 nm and diameters of the second fraction were in a range from 350 to 2300 nm, depending on terpolymer structure. Mixtures of terpolymers with poly(L,L-lactide) and poly(D,D-lactide) blocks yielded nanoparticles with diameters from 350 to 440 nm. Pyrene was incorporated into nanoparticles by partition between solution and nanoparticles or directly during particle formation by dialysis. Monitoring of pyrene release from nanoparticles suggests that a fraction of this compound was entrapped into the polylactide core whereas the remaining one was located in the polyether rich shell. The release from shells is faster for nanoparticles made from copolymers with carboxyl labels in polyglycidol blocks.     

FEMMINA real-time, radio-frequency echo-signal equipment for testing novel investigation methods

Fast echographic multiparameter multi-image novel apparatus (FEMMINA), is a hardware and software platform dedicated to ultrasonic signal and image processing. FEMMINA is able to operate with sequences of radiofrequency (RF) frames. Its architecture is designed to be modular, expandable, and aimed at implementing different ultrasonic investigation techniques. The first experimental characteristic of this system is in its capability to operate in real time with ultrasonic RF signals, starting from acquisition up to processing, storage, and visualization. The second characteristic is the user-system interactivity that allows one to modify the operation appropriately while observing results. Currently, FEMMINA works in both typical experimental situations to study novel investigation techniques and clinical field to validate the proposed methods in different human districts.     

Evaluation study of the effectiveness of the integrated genetic-algorithm-based strategy for the tomographic subsurface detection of defects

An assessment is presented of the integrated genetic-algorithm strategy based on a numerically computed Green's function for subsurface inverse scattering problems arising in nondestructive evaluation/testing industrial applications. To show the effectiveness and current limitations of such a microwave technique in dealing with various scenarios characterized by lossless and lossy host media as well as in noisy environments, several numerical experiments are considered. The results obtained confirm the effectiveness of the approach in fully exploiting the available a priori information through a suitable scattering model, which allows a nonnegligible enhancement of the reconstruction accuracy as well as a reduction of the overall computational burden with respect to standard imaging approaches.     

High‐rate deposition of microcrystalline silicon in a large‐area PECVD reactor and integration in tandem solar cells

We study the high‐rate deposition of microcrystalline silicon in a large‐area plasma‐enhanced chemical‐vapor‐deposition (PECVD) reactor operated at 40.68 MHz, in the little‐explored process conditions of high‐pressure and high‐silane concentration and depletion. Due to the long gas residence time in this process, the silane gas is efficiently depleted using moderate feed‐in power density, thus facilitating up‐scaling of the process to large surfaces. As observed in more traditional deposition processes, the deposition rate and performance of device‐quality material are limited by the inter‐electrode gap of the reactor. We significantly increase the cell performances by reducing this gap. X‐ray diffractometry (XRD) and secondary ion mass spectroscopy (SIMS) are used to characterize the microcrystalline material deposited in the modified reactor at a rate of 1 nm/s. Comparison with a microcrystalline process at a low deposition rate demonstrates that the crystallographic orientation of the absorbing layer of the cell and the concentrations of contaminants are strongly correlated and dependent on the process. We use microcrystalline cells with absorber layer grown at a rate of 1 nm/s integrated as bottom cells in amorphous‐microcrystalline (micromorph) tandem solar cells using the superstrate configuration. We report an initial efficiency of 10.8% (9.6% stabilized) for a tandem cell with 1.2 cm² surface. Copyright © 2010 John Wiley & Sons, Ltd.     

Atmospheric stability and turbulence fluxes at Horns Rev—an intercomparison of sonic,bulk and WRF model data

Direct estimations of turbulent fluxes and atmospheric stability were performed from a sonic anemometer at 50 m height on a meteorological mast at the Horns Rev wind farm in the North Sea. The stability and flux estimations from the sonic measurements are compared with bulk results from a cup anemometer at 15 m height and potential temperature differences between the water and the air above. Surface flux estimations from the advanced weather research and forecast (WRF) model are also validated against the sonic and bulk data. The correlation between the sonic and bulk estimates of friction velocity is high and the highest among all velocity comparisons. From the sonic–bulk–WRF inter‐comparison, it is found that the atmospheric stability measures at the sonic height tend to be closer to the neutral value than the WRF and bulk estimates, which are performed within an air layer closer to the surface, not only from a systematic bulk and WRF under‐prediction of the friction velocity when compared with the sonic value but also because of the lower magnitude of the sonic heat flux compared with that from the WRF simulations. Although they are not measured but parameterized or estimated, the bulk–WRF comparisons of friction velocity and 10 m wind speed show good agreement. It is also shown that on a long‐term basis, the WRF and bulk estimates of stability are nearly equal and that a correction towards a slightly stable atmospheric condition has to be applied to the long‐term wind profile at Horns Rev and at other locations over the North Sea, the correction being larger for points close to the coast. Copyright © 2011 John Wiley & Sons, Ltd.     

Numerical evaluation of internal combustion spark ignition engines performance fuelled with hydrogen – Natural gas blends

The dependence of road transportation from fossil fuels and the related economic and environmental consequences imposes the diversification of energy sources. Hydrogen can strongly contribute to this goal because it can be produced from different renewable energy sources.     

Depolymerization of insulin amyloid fibrils by albumin-modified magnetic fluid

Pathogenesis of amyloid-related diseases is associated with the presence of protein amyloid deposits. Insulin amyloids have been reported in a patient with diabetes undergoing treatment by injection of insulin and causes problems in the production and storage of this drug and in pplication of insulin pumps. We have studied the interference of insulin amyloid fibrils with a series of 18 albumin magnetic fluids (MFBSAs) consisting of magnetite nanoparticles modified by different amounts of bovine serum albumin (w/w BSA/Fe?O? from 0.005 up to 15). We have found that MFBSAs are able to destroy amyloid fibrils in vitro. The extent of fibril depolymerization was affected by nanoparticle physical-chemical properties (hydrodynamic diameter, zeta potential and isoelectric point) determined by the BSA amount present in MFBSAs. The most effective were MFBSAs with lower BSA/Fe?O? ratios (from 0.005 to 0.1) characteristic of about 90% depolymerizing activity. For the most active magnetic fluids (ratios 0.01 and 0.02) the DC50 values were determined in the range of low concentrations, indicating their ability to interfere with insulin fibrils at stoichiometric concentrations. We assume that the present findings represent a starting point for the application of the active MFBSAs as therapeutic agents targeting insulin amyloidosis.