Soft Nanopatterning on Light‐Emitting Inorganic–Organic Composites

In this work we demonstrate the nanopatterning of nanocomposites made by luminescent zinc oxide nanoparticles and light‐emitting conjugated polymers by means of soft molding lithography. Vertical nanofluidics is exploited to overcome the polymer transport difficulties intrinsic in materials incorporating nanocrystals, and the rheology, fluorescence, absolute quantum yield, and emission directionality of the nanostructured composites are investigated. We study the effect of patterned gratings on the directionality of light emitted from the nanocomposites, finding evidence of the enhancement of forward emitted light, due to the printed wavelength‐scale periodicity. These results open new possibilities for the realization of nanopatterned devices based on hybrid organic‐inorganic systems.     

Near‐Infrared (NIR) Organic Light‐Emitting Diodes (OLEDs): Challenges and Opportunities

The rapid development of the science and technology of organic semiconductors has already led to mass application of organic light‐emitting diodes (OLEDs) in television monitors of outstanding quality as well as in a large variety of smaller displays found in smartphones, tablets, and other gadgets, while introduction of the technology to the illumination sector is imminent. Notably, the requirements of all such applications for emission in the visible range of the electromagnetic spectrum are well tuned to the optical and electronic properties of typical organic semiconductors, thereby representing relatively “low‐hanging fruits,” in terms of material development and exploitation. However, the question arises as to whether developing materials suited for efficient near‐infrared (NIR, 700–1000 nm) emission is possible, and, crucially, desirable to enable new classes of applications spanning from through‐space, short‐range communications to biomedical sensors, night vision, and more generally security applications to name but a few. Here, the major fundamental hurdles to be overcome to achieve efficient NIR emission from organic π‐conjugated systems are discussed, recent progress is reviewed, and an outlook for further development of both materials and applications is provided.     

The oral glucose minimal model: estimation of insulin sensitivity from a meal test

Recently, a new approach has been proposed to estimate insulin sensitivity (S(I)) from an oral glucose tolerance test or a meal using an "integral equation". Here, we improve on the "integral equation" by resorting to a "differential equation" approach. The classic glucose kinetics minimal model was used with the addition of a parametric model for the rate of appearance into plasma of oral glucose (Ra). Three behavioral models of Ra were proposed: piecewise-linear (P), spline (S) and dynamic (D). All three models performed satisfactorily allowing a precise estimation of S(I) and a plausible reconstruction of Ra. Mean S(I) estimates were virtually identical: S(I)P = 6.81 +/- 0.87 (SE); S(I)S = 6.53 +/- 0.80; and S(I)D = 6.62 +/- 0.79. S(I) strongly correlated with the integral-equation index (I) S(I)I: r = 0.99, p < 0.01 for models D and S, and r 0.97, p < 0.01 for P. Also, SI compared well with insulin sensitivity estimated from intravenous glucose tolerance test in the same subjects (r = 0.75, p < 0.01; r = 0.71, p < 0.01; r = 0.73, p < 0.01, respectively, for P, S, and D models versus s(I)IVGTT). Finally, the novel approach allows estimation of SI from a shorter test (120 min): model P yielded S(I)R = 7.16 +/- 1.0 (R for reduced) which correlated very well with S(I)P and S(I)I (respectively, r = 0.94, p < 0.01; r = 0.95, p < 0.01) and still satisfactorily with S(I)IVGTT (r = 0.77, p < 0.01).     

To the understanding of the formation of the III–V based droplet epitxial nanorings

The paper deals with the kinetics of the droplet epitaxial GaAs quantum ring formation grown on AlGaAs (0 0 1) surface. The observation is, that the aspect ratio of these nano structures is depends not only on the technological parameters but on the size of the initial droplet. Under appropriate growth conditions, the depressions, in the middle of the rings are deeper than the surface level of the substrate. A large number of tests show, that the depressions in the middle of the small rings are often deeper than that of the larger ones. The number is larger, than just statistical fluctuation. An explanation for this phenomenon and its kinetics are given in the paper, based on the size dependence of the material properties, like for instance solubility. The plausible explanation assumes is that the probability of the crystal seed formation in the larger droplets is higher.     

Thermoacoustic Emission from Carbon Nanotubes Imaged by Atomic Force Microscopy

The thermoacoustic effect of isolated single‐wall carbon nanotubes aligned between electrodes is experimentally observed for the first time by imaging the emitted acoustic wave using an atomic force microscopy‐based technique specifically developed for the task. The capability of such a technique for single‐point thermoacoustic measurements is first verified on carbon nanotubes layers with two electrodes for injecting alternate electric current. The technique is then demonstrated to allow the acquisition, simultaneously with the topography, of images reflecting the pressure of the acoustic wave at fixed distance from the sample. Such a capability is used to collect images reflecting the amplitude of acoustic waves generated by isolated nanotubes and nanotube bundles by the thermoacoustic effect.     

Lateral‐Polarity Structure of AlGaN Quantum Wells: A Promising Approach to Enhancing the Ultraviolet Luminescence

Aluminum‐gallium‐nitride alloys (Al _x Ga_{1– x} N, 0 ≤ x ≤ 1) can emit light covering the ultraviolet spectrum from 210 to 360 nm. However, these emitters have not fulfilled their full promise to replace the toxic and fragile mercury UV lamps due to their low efficiencies. This study demonstrates a promising approach to enhancing the luminescence efficiency of AlGaN multiple quantum wells (MQWs) via the introduction of a lateral‐polarity structure (LPS) comprising both III and N‐polar domains. The enhanced luminescence in LPS is attributed to the surface roughening, and compositional inhomogeneities in the N‐polar domain. The space‐resolved internal quantum efficiency (IQE) mapping shows a higher relative IQE in N‐polar domains and near inversion domain boundaries, providing strong evidence of enhanced radiative recombination efficiency in the LPS. These experimental observations are in good agreement with the theoretical calculations, where both lateral and vertical band diagrams are investigated. This work suggests that the introduction of the LPS in AlGaN‐based MQWs can provide unprecedented tunability in achieving higher luminescence performance in the development of solid state light sources.     

On the impact of physical layer awareness on scheduling and resource allocation in broadband multicellular IEEE 802.16 systems [Radio Resource Management and Protocol Engineering for IEEE 802.16]

Multicellular networks based on the IEEE 802.16 standard appear to be very promising candidates to provide end users with broadband wireless access. However, they also pose interesting challenges in terms of radio resource management, where several design choices are not specified in the standard, intentionally left open to implementors. For this reason, we focus in this article on scheduling and resource allocation, and investigate how they could operate in a cross-layer fashion. In particular, we describe the principles of joint scheduling and resource allocation for IEEE 802.16 operating in AMC mode, and discuss the critical role played by physical layer considerations, especially intercell interference estimation and channel state awareness, in the obtained performance. This leads to identifying key open issues and possible general solutions     

Inpainting of binary images using the Cahn-Hilliard equation.

Image inpainting is the filling in of missing or damaged regions of images using information from surrounding areas. We outline here the use of a model for binary inpainting based on the Cahn-Hilliard equation, which allows for fast, efficient inpainting of degraded text, as well as super-resolution of high contrast images.     

An efficient HARQ scheme for applications in multicast communication systems

This paper deals with the performance evaluation and optimization of an efficient hybrid automatic repeat request (HARQ) scheme suitable for applications delivered over lossy multicast communication channels. In particular, different from previously investigated strategies, this paper proposes a modified HARQ scheme based on the symbol combining principle (MHARQ‐SC) where multiple copies of a same packet are consecutively transmitted at each transmission opportunity. By considering as the performance metrics, the mean packet delivery delay, and the energy consumption per information packet, this paper presents suitable performance evaluation and optimization strategies tailored for multicast communications. For the sake of comparisons, it has been also analyzed, under the same operational conditions, the performance of different HARQ schemes optimized for multicast communications. Numerical results have been provided to validate the proposed performance evaluation and optimization approaches in the case of the MHARQ‐SC scheme. An important result devised here is that the reported analytical results clearly highlight the performance gain of the proposed strategy in comparison with all the other considered alternatives. Copyright © 2013 John Wiley & Sons, Ltd.