Temporal and spatial dynamics of surface run‐off from Lake Basaka catchment (Ethiopia) using SCS‐CN model coupled with remote sensing and GIS

The Lake Basaka catchment (Ethiopia) has undergone a significant land use–land cover (LULC) change and lake level rise over the past five decades. Significant quantities of water and sediment flow annually into the lake through erosion processes. An appropriate method of estimating the surface run‐off from such ungauged and dynamic catchment is extremely important for delineating sensitive areas (based on run‐off responses) to be protected and for development of suitable measures to reduce run‐off and associated soil loss. Reliable prediction of run‐off, however, is very difficult and time‐consuming for catchments such as that of Lake Basaka. The present study estimated the dynamics of surface (direct) run‐off using the NRCS‐CN model in ArcGIS, assisted by remote sensing and ancillary data. The results indicated the Lake Basaka catchment experienced significant temporal and spatial variability in its run‐off responses, depending on the rainfall (amount and distribution) pattern and LULC changes. A significant run‐off increase occurred after 1973, consistent with significant LULC changes and lake level increments occurring after that period. A reduced vegetation cover also resulted in increased run‐off coefficient of the lake catchment from 0.11 in the 1970s to 0.23 in the 2000s, indicating the important need to consider possible future LULC evolution when forecasting the lake catchment run‐off behaviour.     

Hydroisomerization of Renewable and Fossil n-Alkanes over Bifunctional Dealuminated ZSM-5 Catalysts

The hydroisomerization of two long-chain n-alkane mixtures was investigated over bifunctional Pt/H-ZSM-5 catalysts before and after dealumination of preshaped zeolite/binder pellets. The hydroisomerization over the dealuminated catalysts leads to more isomers and less cracking products. Consequently, higher ratios of multi- to mono-branched isomerization products are formed as expected for large- rather than medium-pore zeolites. This indicates a higher availability of space in the vicinity of the active sites and provides an attractive route to make medium-pore zeolites suitable for upgrading higher boiling hydrocarbon feeds.     

Recovery of Phosphoric Acid from Spent Petrochemical Catalysts

Petrochemical catalysts are widely used in the industry. For the production of cumene, zeolite-based catalysts containing phosphoric acid are applied. Over the time, coking deactivates the surface, and the catalyst has to be exchanged and disposed of. Different process approaches for recycling the phosphoric acid-containing catalysts were investigated. Related preliminary investigations have shown that calcination of the used catalyst is necessary prior to reprocessing. By digesting the catalyst with hydrofluoric acid, ∼96 % phosphate was recovered. However, this process is very costly in terms of process technology. More promising is digestion by basic or acidic routes. Several options are possible here, and digestion with H₃PO₄ proved to be particularly suitable. Here, phosphate yields reached up to 98.8 %, with a positive balance of economic efficiency at the same time. The catalyst can be produced and recycled in the same plant with the same reagents, what constitutes a major breakthrough towards sustainability in industrial catalysis.     

Segmentation of the fascia lata and reproducible quantification of intermuscular adipose tissue (IMAT) of the thigh

Magnetic Resonance Materials in Physics, Biology and Medicine - To develop a precise semi-automated segmentation of the fascia lata (FL) of the thigh to quantify IMAT volume in T1w MR images and...     

Pressure-infiltration processing of reinforced aluminum

Pressure infiltration of liquid metal is one of the most important processing routes for the production of aluminum-matrix composites having a self-supporting reinforcement phase. This article briefly examines the physical phenomena governing infiltration processes, to present practical guidelines derived from their analysis for optimization of the process and the materials produced. Engineering aspects that are pertinent to infiltration techniques, including preform preparation, process configurations, flow control, and innovative processes, are summarized.     

Stabilised finite element methods for a bending moment formulation of the Reissner-Mindlin plate model

This work presents new stabilised finite element methods for a bending moments formulation of the Reissner-Mindlin plate model. The introduction of the bending moment as an extra unknown leads to a new weak formulation, where the symmetry of this variable is imposed strongly in the space. This weak problem is proved to be well-posed, and stabilised Galerkin schemes for its discretisation are presented and analysed. The finite element methods are such that the bending moment tensor is sought in a finite element space constituted of piecewise linear continuos and symmetric tensors. Optimal error estimates are proved, and these findings are illustrated by representative numerical experiments.     

“From microtiter plates to droplets” tools for micro-fluidic droplet processing

Droplet-based microfluidic allows high throughput experimentation in with low volume droplets. Essential fluidic process steps are on the one hand the proper control of the droplet composition and on the other hand the droplet processing, manipulation and storage. Beside integrated fluidic chips, standard PTFE-tubings and fluid connectors can be used in combination with appropriate pumps to realize almost all necessary fluidic processes. The segmented flow technique usually operates with droplets of about 100–500 nL volume. These droplets are embedded in an immiscible fluid and confined by channel walls. For the integration of segmented flow applications in established research workflows—which are usually base on microtiter plates—robotic interface tools for parallel/serial and serial/parallel transfer operations are necessary. Especially dose–response experiments are well suited for the segmented flow technique. We developed different transfer tools including an automated “gradient take-up tool” for the generation of segment sequences with gradually changing composition of the individual droplets. The general working principles are introduced and the fluidic characterizations are given. As exemplary application for a dose–response experiment the inhibitory effect of antibiotic tetracycline on Escherichia coli bacteria cultivated inside nanoliter droplets was investigated.     

Giving too much social support: social overload on social networking sites

As the number of messages and social relationships embedded in social networking sites (SNS) increases, the amount of social information demanding a reaction from individuals increases as well. We observe that, as a consequence, SNS users feel they are giving too much social support to other SNS users. Drawing on social support theory (SST), we call this negative association with SNS usage ‘social overload’ and develop a latent variable to measure it. We then identify the theoretical antecedents and consequences of social overload and evaluate the social overload model empirically using interviews with 12 and a survey of 571 Facebook users. The results show that extent of usage, number of friends, subjective social support norms, and type of relationship (online-only vs offline friends) are factors that directly contribute to social overload while age has only an indirect effect. The psychological and behavioral consequences of social overload include feelings of SNS exhaustion by users, low levels of user satisfaction, and a high intention to reduce or even stop using SNS. The resulting theoretical implications for SST and SNS acceptance research are discussed and practical implications for organizations, SNS providers, and SNS users are drawn.     

The complexity of intersecting finite automata having few final states

The problem of determining whether several finite automata accept a word in common is closely related to the well-studied membership problem in transformation monoids. We raise the issue of limiting the number of final states in the automata intersection problem. For automata with two final states, we show the problem to be \({\oplus}\)L-complete or NP-complete according to whether a nontrivial monoid other than a direct product of cyclic groups of order 2 is allowed in the automata. We further consider idempotent commutative automata and (Abelian, mainly) group automata with one, two, or three final states over a singleton or larger alphabet, elucidating (under the usual hypotheses on complexity classes) the complexity of the intersection nonemptiness and related problems in each case.     

A Review of Element-Based Galerkin Methods for Numerical Weather Prediction: Finite Elements,Spectral Elements,and Discontinuous Galerkin

Numerical weather prediction (NWP) is in a period of transition. As resolutions increase, global models are moving towards fully nonhydrostatic dynamical cores, with the local and global models using the same governing equations; therefore we have reached a point where it will be necessary to use a single model for both applications. The new dynamical cores at the heart of these unified models are designed to scale efficiently on clusters with hundreds of thousands or even millions of CPU cores and GPUs. Operational and research NWP codes currently use a wide range of numerical methods: finite differences, spectral transform, finite volumes and, increasingly, finite/spectral elements and discontinuous Galerkin, which constitute element-based Galerkin (EBG) methods. Due to their important role in this transition, will EBGs be the dominant power behind NWP in the next 10 years, or will they just be one of many methods to choose from? One decade after the review of numerical methods for atmospheric modeling by Steppeler et al. (Meteorol Atmos Phys 82:287–301, 2003), this review discusses EBG methods as a viable numerical approach for the next-generation NWP models. One well-known weakness of EBG methods is the generation of unphysical oscillations in advection-dominated flows; special attention is hence devoted to dissipation-based stabilization methods. Since EBGs are geometrically flexible and allow both conforming and non-conforming meshes, as well as grid adaptivity, this review is concluded with a short overview of how mesh generation and dynamic mesh refinement are becoming as important for atmospheric modeling as they have been for engineering applications for many years.