Calibration of the Density-Gradient model by using the multidimensional effective-mass Schrödinger equation

A calibration method is developed for the electron effective mass in the Density-Gradient model. This method uses the two- and three-dimensional effective-mass Schrödinger equations, which are solved for bounded quantum systems. The electron effective mass is computed by fitting the electron concentration computed by using the Density-Gradient model to the electron concentration computed by using the Schrödinger equation. Results for strongly confined silicon system with (100), (110), and (111) crystallographic orientations are presented. It is shown that the effective mass varies with the shape and dimensions of the quantum box. In device simulations, one should use the value of m_n that corresponds to the right shape and dimensions of the confinement region in the device.     

Design of random doping fluctuation resistant structures of semiconductor devices

An automated technique is presented for the computation of the doping profiles that minimize the intrinsic fluctuations of various parameters induced by random doping fluctuations in semiconductor devices. The technique is based on the computation of the doping sensitivity functions of the parameters under consideration and the constrained minimization of the standard deviation of fluctuations by using the Lagrange multipliers technique. The technique is then applied to the minimization of the random doping induced fluctuations of the threshold voltage in 40-nm channel length MOSFET device.     

The Effect of the Ionizing Radiation on Hydroxyapatite–Polydimethylsiloxane Layers

The bio hydroxyapatite (HAp) was used from a long time in different medical and environmental applications. The HAp layers with a uniform surface were used for various medical applications such as orthopedic and dental metal implants. In this work, we reported on the influence of X‐ray radiation on the structural and morphological properties of composite layers based on HAp and polydimethylsiloxane (PDMS) deposited on titanium substrates. The HAp:PDMS layers were investigated by different complementary methods such as scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), and glow discharge optical emission spectrometry (GDOES). FTIR spectral analysis showed that the molecular structure of the coatings was not changed after their irradiation even though, the depth profile analysis performed by GDOES indicated a depletion of Ca and P elements from the HAp:PDMS irradiated samples. By SEM, we showed that the morphological features of the coatings were also changed, as the irradiated layers are delaminated. The biological assays confirmed that the antibacterial activity of HAp:PDMS composite layers increased after irradiation. The results obtained in this study highlighted that the biological properties of HAp:PDMS layers could be influenced by irradiation. POLYM. ENG. SCI., 59:2406–2412, 2019. © 2019 Society of Plastics Engineers     

Fiber Bridging during Melt Electrowriting of Poly(ε-Caprolactone) and the Influence of Fiber Diameter and Wall Height

Melt electrowriting (MEW) is a direct-writing technology for small diameter fibers; however, due to electrostatic attraction, the technique is restricted in how close these microfibers can be positioned on the collector. Here, the minimum interfiber distance between parallel poly(ε-caprolactone) MEW microfibers is determined for different fiber diameters and number of layers on noncoated and star-shaped poly(ethylene oxide-stat-propylene oxide) (sP(EO-stat-PO))-coated glass coverslips. The effect of the fiber diameter, the number of fiber layers, and shape of turning loops affect precision and the minimum interfiber distance. Single fibers with diameter of 5, 10, and 15 µm have a minimum interfiber distance without fiber bridging of 33 ± 2.7, 54 ± 2.2, and 62 ± 2.7 µm, respectively. Increasing the number of layers to ten increases this minimum interfiber distance approximately twofold to 60 ± 3.5, 97 ± 4.5, and 102 ± 2.7 µm for the increasing fiber diameters. The sP(EO-stat-PO) slightly increases the minimum interfiber distance for the 15 µm diameter group only, with spacing for the 5 and 10 µm fibers unaffected by the coating. Identifying and determining the fabrication limits for MEW is highly instructional for users working and designing scaffolds with this technology.     

Peculiarities of Neurostimulation by Intense Nanosecond Pulsed Electric Fields: How to Avoid Firing in Peripheral Nerve Fibers

Intense pulsed electric fields (PEF) are a novel modality for the efficient and targeted ablation of tumors by electroporation. The major adverse side effects of PEF therapies are strong involuntary muscle contractions and pain. Nanosecond-range PEF (nsPEF) are less efficient at neurostimulation and can be employed to minimize such side effects. We quantified the impact of the electrode configuration, PEF strength (up to 20 kV/cm), repetition rate (up to 3 MHz), bi- and triphasic pulse shapes, and pulse duration (down to 10 ns) on eliciting compound action potentials (CAPs) in nerve fibers. The excitation thresholds for single unipolar but not bipolar stimuli followed the classic strength–duration dependence. The addition of the opposite polarity phase for nsPEF increased the excitation threshold, with symmetrical bipolar nsPEF being the least efficient. Stimulation by nsPEF bursts decreased the excitation threshold as a power function above a critical duty cycle of 0.1%. The threshold reduction was much weaker for symmetrical bipolar nsPEF. Supramaximal stimulation by high-rate nsPEF bursts elicited only a single CAP as long as the burst duration did not exceed the nerve refractory period. Such brief bursts of bipolar nsPEF could be the best choice to minimize neuromuscular stimulation in ablation therapies.     

Effects of equal‐channel,multiple‐angular extrusion on the physical and mechanical properties of glassy polymers

Through the examples of polycarbonate and poly(methyl acrylate), the evolution of the structure and properties of glassy polymers processed by equal‐channel multiple‐angular extrusion (ECMAE) were studied. It was demonstrated that ECMAE allowed the substantial improvement of the set of strain–strength characteristics of these materials, regardless of the direction of loading applied. With the use of the data from scanning electron microscopy, differential scanning calorimetry, and dilatometry, we found that the simultaneous growth in the strength, plasticity, and impact resistance was related to the formation of a net of biaxially oriented polymeric chains, the decrease in the free volume, and the reinforcement of intermolecular interaction. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42180.     

Isotherms,kinetics, and thermodynamic studies for adsorption of pigments and oxidation products in oil bleaching from catfish waste

Abstract

The aim of this work was to study the bleaching of oil extracted from the heads of the catfish by thermomechanical process through equilibrium, kinetics, and thermodynamics adsorption studies. The condition for the bleaching step was with 1% (w/w) adsorbent composed of 95% activated earth and 5% activated carbon (w/w). The pseudo-first order and pseudo-second order models were the most appropriate to represent the adsorption kinetics. The temperature of 80?°C increased the adsorption capacity of the two adsorbates, and the activation energies values were of 47.47 and 44.82?kJ mol^?1, respectively, for the adsorption of carotenoids and peroxides. The Langmuir model was the most appropriate to describe the bleaching equilibrium curves. The thermodynamic parameters revealed that the processes were endothermic, favorable, and spontaneous and the interaction between adsorbent and adsorbate was physical.     

Ceramics based on calcium phosphates substituted with magnesium ions for bone regeneration

In this study, chemical precipitation methods were used to obtain ceramic materials doped with magnesium ions in order to improve the regeneration properties of materials used for tissue engineering. Two different ratios of magnesium oxide were used to dope the ceramic powder, more precisely 5% and 10%. The synthesized materials were characterized to determine the calcination temperature of the precursor powder by means of thermal analysis; to determine the mineralogical composition, X-ray diffraction was employed and the scanning electron microscopy was used to determine the microstructure. To make use of these ceramics as biomaterials, viability and proliferation cell tests have been performed. Since synthetic materials have several limitations with regard to medical applications, the materials based on HAp substituted with Mg ions are a promising solution for the regeneration of bone defects because they have a similar bone structure. The presence of Mg in the material proves to be beneficial because this element plays an important role in bone cell regeneration, and more specifically, in stimulating osteoblast proliferation. The materials synthesized in this work present a suitable morphology for uses in bone regeneration because they offer to cells a friendly environment for growth and anchoring.     

Health and wellness monitoring through wearable and ambient sensors: exemplars from home-based care of elderly with mild dementia

Monitoring and timely intervention are extremely important in the continuous management of health and wellness among all segments of the population, but particularly among those with mild dementia. In relation to this, we prescribe three design principles for the construction of services and applications. These are ambient intelligence, service continuity, and micro-context. In this paper, we provide three exemplars from our research and development activities that illustrate the use of these design principles in the construction of services and applications. All the applications are drawn from the field of care for mild dementia patients in their living quarters.