Kinetik und Mechanismus der Oxydation und Reduktion von Wüstit in Wasserdampf-Wasserstoff-Gemischen

Deuterium-Austausch zwischen Wasserdampf und Wasserstoff an der Wüstitoberfläche. Widerstandsmessungen zur Untersuchung der Sauerstoffübertragung. Nachweis der Teilschritte H₂O = OH(ad) + H(ad) und OH(ad) = O(ad) + H(ad) bei der Sauerstoffübertragung. Geschwindigkeitsgleichungen der Teilschritte. Abhängigkeit von Druck, Sauerstoffaktivität und Temperatur. Kontrolle der Reaktionsgeschwindigkeit durch die Teilreaktionen.     

Visual-aesthetic components in the cybernetics of urban planning

The research work summarized here has been conducted at the Cathedra for Urban Planning at the Faculty for Architecture, Engineering and Geodesy of the University of Ljubljana, Slovenia, from 1972 to 1974. The theoretical and methodological foundations were tested succesfully in the area of Kozarje near Ljubljana, and the research was extended to cover the whole metropolitan region of Ljubljana as part of the Year 2000 Master Plan, worked out for the City Council of Ljubljana.One of the basic goals of this research was to find a scientific method of managing the visual environment, which would enable society to control, simulate and decide on changes in its aesthetic qualities. Therefore, we must encompass the visual message in some operational system, where it is quantifiable.At this stage it must be pointed out that our goal was not to develop mathematical aesthetics — beauty from a black box — but to rationalize visual-aesthetic relations in space; to determine objective conditions and solution spaces, within which architectural creation could be realized. A classical heuristic and intuitive approach in design problem-solving can be qualitatively higher than through the methodology shown here. However, rapid urbanization, personal mobility and behavioural changes and the involvement of numerous designers, all make control of the overall design of cities and regions increasingly difficult. The overall impact and interactive nature of visual phenomena seem to be impossible to govern without an objective, quantifiable model. We have tried to establish some objective limits to possible changes, so that the basic visual-aesthetic qualities should not be lost or even altered.     

A thermodynamic model for composition and chemical driving force for nucleation of complex carbonitrides in microalloyed steel

The extent and degree of dispersion of carbonitrides in high strength low alloy (HSLA) steels is controlled by nucleation and growth processes. A thermodynamic model is presented enabling calculation of the composition of the carbonitride embryo as well as the chemical driving force for nucleation (CDF) in the austenite region of a multicomponent microalloyed steel. The analysis made for a Nb-Ti HSLA steel indicates that the critical carbonitride nucleus is richer in N and Ti than the bulk precipitate at equilibrium at a given temperature and the difference increases when the holding temperature decreases. The results also show that the Ti addition has an optimum value defined by the maximum in the ratio of bound Ti and Nb to their total content. The maximum CDF correlated with the minimum Ti content sufficient to form a carbonitride at the austenitizing temperature.     

Effect of location in the canopy on the colour development of three apple cultivars during growth

BACKGROUND: Homogeneity in appearance is one of the quality aspects asked for in the supply chain. Decreasing the biological variation in batches of harvested apples (cultivars Braeburn, Fuji and Gala) becomes increasingly important. Skin colour is one of the aspects that determine both optimal harvest and stage of development. Skin colour is affected by location in the canopy. The rules of development of biological variation are now established and will be used on skin colour data. RESULTS: The Minolta colour aspects a*, b* and L* measured before commercial harvest change in a sigmoidal fashion and can be analysed including the biological variation, with a logistic model in indexed nonlinear regression, obtaining explained parts of above 90%. The mechanism of colour change is not affected by state of development or location in the canopy. The location in the canopy affects the intensity of both red and green colouring compounds. The variation in colouration is not affected by the location in the canopy. CONCLUSION: The red‐coloured apple cultivar (Gala) depends more on the location in the canopy than the less‐coloured cultivars (Fuji and Braeburn). The colour development in Fuji apples is considerably slower, with a much larger variation in stage of development. The location in the canopy affects all aspects of biological variation (biological shift factor and asymptotic starting level of colouration) for all three colour aspects L*, a* and b*, but only the mean value, not the standard deviation. The biological shift factors per colour aspects are linearly related. Once induced, variation remains constant during development. Copyright © 2012 Society of Chemical Industry     

Multiphase visualisation of fat containing β-lactoglobulin-κ-carrageenan gels by confocal scanning laser microscopy, using a novel dye, V03-01136, for fat staining

In this study, the gel strength and visible microstructure of fat containing β-lactoglobulin-κ-carrageenan gels were investigated using puncture testing and confocal scanning laser microscopy, respectively. The gel strength was closely linked to the visible microstructure of the whey protein network as stained with Rhodamine B. Covalent labelling of κ-carrageenan with FITC prior to gel formation enabled localisation of the hydrocolloid phase, but caused a significant drop in the gel strength. This effect coincided with the observed reduction of the κ-carrageenan intrinsic viscosity, which was found to be a result of the labelling process. The use of a novel dye, V03-01136, for the staining of fat allowed for the specific and concurrent visualisation of the protein, hydrocolloid and fat phases under the conditions applied in the study.     

Compensatory mechanisms in erythrocyte lipids in patients with atherosclerosis

The quantitative coposition of phospholipids and fatty acids of erythrocytes was investigated in patients with atherosclerosis. It was stated that the erythrocyte lipids of atherosclerotic patients contained smaller quantitities of phosphatidylcholine and phosphatidylinositol, a significantly larger quantity of sphingomyelin, and higher sphingomyelin/phosphatidylcholine and cholesterol/phospholipid ratios. The existence of compensatory changes was stated, which was evident in the reduction of palmitic and stearic acids and the increase of linoleic and eicosatrienoic acids in erythrocyte phospholipids. These changes in fatty acid composition probably cause minimal changes in the membrane fluidity indiced by an increased cholesterol/phospholipid and sphingomyelin/phosphatidylcholine ratios. This paper was the first evidence of occurrence of those changes in erythrocytes during spontaneous atherosclerosis in human     

Life-cycle assessment of hydrogen technologies with the focus on EU critical raw materials and end-of-life strategies

We present the results of a life-cycle assessment (LCA) for the manufacturing and end-of-life (EoL) phases of the following fuel-cell and hydrogen (FCH) technologies: alkaline water electrolyser (AWE), polymer-electrolyte-membrane water electrolyser (PEMWE), high-temperature (HT) and low-temperature (LT) polymer-electrolyte-membrane fuel cells (PEMFCs), together with the balance-of-plant components. New life-cycle inventories (LCIs), i.e., material inputs for the AWE, PEMWE and HT PEMFC are developed, whereas the existing LCI for the LT PEMFC is adopted from a previous EU-funded project. The LCA models for all four FCH technologies are created by modelling the manufacturing phase, followed by defining the EoL strategies and processes used and finally by assessing the effects of the EoL approach using environmental indicators. The effects are analysed with a stepwise approach, where the CML2001 assessment method is used to evaluate the environmental impacts. The results show that the environmental impacts of the manufacturing phase can be substantially reduced by using the proposed EoL strategies (i.e., recycled materials being used in the manufacturing phase and replacing some of the virgin materials). To point out the importance of critical materials (in this case, the platinum-group metals or PGMs) and their recycling strategies, further analyses were made. By comparing the EoL phase with and without the recycling of PGMs, an increase in the environmental impacts is observed, which is much greater in the case of both fuel-cell systems, because they contain a larger quantity of PGMs.     

Nonoxidative methane activation,coupling, and conversion to ethane,ethylene, and hydrogen over Fe/HZSM‐5, Mo/HZSM‐5, and Fe–Mo/HZSM‐5 catalysts in packed bed reactor

A high abundance of methane and its relatively low price make it an attractive raw feedstock for the production of ethylene, which is in the consumer demand in recent years. Direct catalytic nonoxidative conversion is interesting, because it could be utilized on natural gas well sites. Monometallic and bimetallic Fe and Mo catalysts were prepared for the purpose of the coupling to ethane and ethene. Three supported materials were synthesized with the following loading of metal: 2.5‐wt% Fe, 5.0‐wt% Fe, and 2.5‐wt% Mo on HZSM‐5. Process' chemical reactions were also catalyzed with a constant 2.5‐wt% Mo/HZSM‐5, which had different amounts of Fe, namely, 0.5, 1.0, and 2.5 wt%. Fourier transform infrared (FTIR), N₂ adsorption/desorption, NH₃ temperature‐programmed desorption (TPD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and X‐ray diffraction (XRD) were applied for characterization. Coke, accumulated on spent solids, was determined by thermogravimetric analysis (TGA). Activity was evaluated in quartz‐packed bed reactor. All surfaces suffered from deactivation due to carbon formation. The addition of Fe to Mo increased CH₄ reacted. The highest selectivity for alkenes was achieved over 1.0‐wt% Fe to 2.5‐wt% Mo/HZSM‐5. At the peak of performance, the C‐based reactivity was 52% for olefins and 2% for alkanes. Stability was accomplished over 2.5‐wt% Fe/HZSM‐5, where the rate of C₂ synthesis was comparatively stable for 20 hours of the time on stream. The selective C‐basis yield for C₂H₄ and C₂H₆ was 36% and 23%, respectively. The lowest measured quantity of (carbonaceous) by‐products was deposited on 2.5‐wt% Fe/HZSM‐5 after 26 hours. Propylene was detected very limitedly.     

Corrosion of high purity Mg, Mg2Zn0.2Mn, ZE41 and AZ91 in Hank’s solution at 37 °C

The CO₂ partial pressure required to maintain a synthetic body fluid (SBF) at a constant pH, based on the initial bicarbonate concentration, was evaluated to be 0.013 atm for Hank’s solution and 0.083 atm for SBF27. Corrosion of high purity Mg and three Mg alloys in Hank’s solution was studied using hydrogen evolution, weight loss and Tafel extrapolation. The solution pH was maintained constant by CO₂. There was initially an incubation period with a low corrosion rate, a period of increasing corrosion rate, and subsequently steady state corrosion. Some hydrogen dissolved in the Mg metal.     

Structural,mechanical and electrical-contact properties of nanocrystalline-NbC/amorphous-C coatings deposited by magnetron sputtering

Niobium-carbide nanocomposite coatings with a carbon content varying from 43 to 64 at.% were deposited by dual DC magnetron sputtering. X-ray diffraction, x-ray photoelectron spectroscopy and electron microscopy showed that all coatings consisted of nanometer sized NbC grains embedded in a matrix of amorphous carbon. Mechanical properties and electrical resistivity showed a strong dependency on the amount of amorphous carbon (a-C) and NbC grain size in the coating. The highest hardness (23 GPa), elastic modulus (295 GPa) and the lowest resistivity (260 μΩ cm) were measured for the coating with about 15% of a-C phase. Contact resistance measurements using a crossed cylinder set-up showed lowest contact resistance for the coating containing 33% a-C (140 μΩ at a contact force of 100 N), which is comparable to a Ag reference (45 μΩ at a contact force of 100 N). Comparison with TiC-based nanocomposites studied under similar conditions showed that the NbC system has less tendency to form a-C and that lowest contact resistance is obtained at comparable amounts of a-C phase in both material systems (33% for NbC compared to 35% for TiC). With these good electrical contact properties, the NbC nanocomposites can be considered as a potential material for electrical contact applications.