Effect of β-cyclodextrin on antioxidant activity of coumaric acids

Inclusion complexes of o-, m- and p-coumaric acid (CA) with β-cyclodextrin (βCD) were prepared in stoichiometric ratios (1:1) and stability constants and antioxidant activity of the complexes were studied. The apparent stability constants in aqueous solution of 0.39 × 10³ M⁻¹, 2.81 × 10³ M⁻¹ and 49 × 10³ M⁻¹ for o-, m- and p-CA complexes, respectively, were determined by phase solubility tests. Different analytical techniques (IR, MS) in combination with different solvent washing procedures, were used for confirmation of the nature of the inclusion complexes. Dioxan was a suitable solvent for removal of only free CA and CA adsorbed on the surface of the βCD, while methanol removed absorbed, included and free CA from the complexes. In the case of o- and m-CA–βCD complexes, antioxidant activity was significantly increased while, in p-CA–βCD, it remained unchanged. The impact of complex structure on antioxidant activity of CA isomers was clarified.     

Polyamide 6 composite fibers with incorporated mixtures of melamine cyanurate,carbon nanotubes,and carbon black

Polyamide 6 (PA6) composite filament yarns were produced by the simultaneous incorporation of melamine cyanurate (MeCy) with multiwalled carbon nanotubes (CNTs) and carbon black (CB) into a composite matrix in a melt-spinning process. The results show that the simultaneous incorporation of MeCy with CNTs or CB additives provided filaments with a uniform black color. Tensile analysis confirmed that a reinforcing effect was achieved when CB was used, whereas the CNTs induced a reducing effect on the filament tenacity. With regard to the burning behavior, the flame-retardant action of MeCy was preserved in the presence of CB but was significantly hindered when used in combination with CNTs. These results indicate that the mixture of MeCy and CB was much more compatible for the production of reinforced PA6 composite filaments with increased thermal stability and improved flame retardancy over those of the MeCy and CNTs. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47007.     

Preparation of Macroscopic Block‐Copolymer‐Based Gyroidal Mesoscale Single Crystals by Solvent Evaporation

Properties arising from ordered periodic mesostructures are often obscured by small, randomly oriented domains and grain boundaries. Bulk macroscopic single crystals with mesoscale periodicity are needed to establish fundamental structure–property correlations for materials ordered at this length scale (10–100 nm). A solvent‐evaporation‐induced crystallization method providing access to large (millimeter to centimeter) single‐crystal mesostructures, specifically bicontinuous gyroids, in thick films (>100 µm) derived from block copolymers is reported. After in‐depth crystallographic characterization of single‐crystal block copolymer–preceramic nanocomposite films, the structures are converted into mesoporous ceramic monoliths, with retention of mesoscale crystallinity. When fractured, these monoliths display single‐crystal‐like cleavage along mesoscale facets. The method can prepare macroscopic bulk single crystals with other block copolymer systems, suggesting that the method is broadly applicable to block copolymer materials assembled by solvent evaporation. It is expected that such bulk single crystals will enable fundamental understanding and control of emergent mesostructure‐based properties in block‐copolymer‐directed metal, semiconductor, and superconductor materials.     

Compensatory mechanisms in erythrocyte lipids in patients with atherosclerosis

The quantitative coposition of phospholipids and fatty acids of erythrocytes was investigated in patients with atherosclerosis. It was stated that the erythrocyte lipids of atherosclerotic patients contained smaller quantitities of phosphatidylcholine and phosphatidylinositol, a significantly larger quantity of sphingomyelin, and higher sphingomyelin/phosphatidylcholine and cholesterol/phospholipid ratios. The existence of compensatory changes was stated, which was evident in the reduction of palmitic and stearic acids and the increase of linoleic and eicosatrienoic acids in erythrocyte phospholipids. These changes in fatty acid composition probably cause minimal changes in the membrane fluidity indiced by an increased cholesterol/phospholipid and sphingomyelin/phosphatidylcholine ratios. This paper was the first evidence of occurrence of those changes in erythrocytes during spontaneous atherosclerosis in human     

Rolling contact fatigue endurance of powder-extruded bearing steel

The mechanical and toughness properties and rolling contact fatigue endurance of powder-extruded bearing steel made from nitrogen atomized remelted turning powder in as-extruded and as-heat treated state are presented. The mechanical and toughness properties are comparable with those of wrought bearing steel. Rolling contact fatigue endurance was tested by the AXMAT method in as-extruded and as-spheroidizing annealed states depending on the austenitizing temperature, which ranged from 790 °C to 870 °C. Powder-extruded bearing steel in both states showed slightly higher hardness (63 HRC), higher contact fatigue resistance (L₁₀ = 80.7 and 55.2 million load cycles, respectively) in comparison with wrought steel (L₁₀ = 31.8 million load cycles). The results demonstrate the advantageous properties of powder-extruded bearing steel for high dynamic loading.     

Liberalising Deployment of Internet of Things Devices and Services in Large Scale Environments

There is an ongoing enormous expansion of Internet of Things devices and services in everyday life, notably in novel large scale urban environments called Smart Cities. There, availability and uses of Internet of Things by end users and businesses is mainly palpable subject to prior knowledge of the relevant providers and use of dedicated applications that are associated with them. This current reality can be largely ascribed to the property of “verticality” of autonomous Internet of Things eco-systems in Smart Cities, where Internet of Things devices (e.g. sensor nodes) are connected over a communication infrastructure to service-cloud platforms that deliver and process data that is then presented at the applications level. This paper explains possibilities for revolutionary changes needed towards liberalising deployment and visibility of IoT services and data associated with them. It advocates a conceptual approach termed “horizontal networking for Internet of Things” facilitating a more open and generic presence of Internet of Things through the proposed Internet of Things identification meta-data. The vision is built on needed novel practical features in the current communication setups. The features comprise combinations of the opportunistic and near-match search and discovery model, Internet of Things identification meta-data also reflecting the physical and network-based dimensions of devices’ locations, novel routing and data flow models emerging via Information-Centric Networking and changes required in the elements of the current telecommunication infrastructure and the Internet.     

[4]Helicene–Squalene Fluorescent Nanoassemblies for Specific Targeting of Mitochondria in Live‐Cell Imaging

Ester, amide, and directly linked composites of squalene and cationic diaza [4]helicenes 1 are readily prepared. These lipid‐dye constructs 2 , 3 , and 4 give in aqueous media monodispersed spherical nanoassemblies around 100–130 nm in diameter with excellent stability for several months. Racemic and enantiopure nanoassemblies of compound 2 are fully characterized, including by transmission electron microscope and cryogenic transmission electron microscope imaging that did not reveal higher order supramolecular structures. Investigations of their (chir)optical properties show red absorption maxima ≈600 nm and red fluorescence spanning up to the near‐infrared region, with average Stokes shifts of 1350–1550 cm^?1. Live‐cell imaging by confocal microscopy reveals rapid internalization on the minute time scale and organelle‐specific accumulation. Colocalization with MitoTracker in several cancer cell lines demonstrates a specific staining of mitochondria by the [4]helicene–squalene nanoassemblies. To our knowledge, it is the first report of a subcellular targeting by squalene‐based nanoassemblies.     

Numerical simulation of backdraft phenomena

This paper reports preliminary computational fluid dynamics (CFD) simulations of backdraft observed in an experimental rig at Lund University. The analysis was performed with the CFX software using the Detached Eddy Simulation (DES) turbulence model, a hybrid of Large Eddy Simulation (LES) and RANS, in combination with the EDM combustion model. The DES model uses a RANS formulation in wall proximity to avoid computationally expensive grid resolution that is necessary for realistic LES predictions in wall layers.     

Development and application of a road product model

Product modeling is not a new technology any more, but its use in construction industry is still very rare, even more in the area of road design, construction and maintenance. The paper presents the evolution of a road product model, PMC, from its early concepts in 1993 to the latest implementations and applications. It explains the basic structure of the model and compares the PMC with other existing road models. Some software modules based on the latest version of the PMC road product model are presented. Further the paper presents experiences and findings of a case study, where the model and the relevant software has been tested. The paper concludes with a discussion on effectiveness of the PMC and suggests next steps for a broader acceptance of the presented technology.     

Top-down lipidomic screens by multivariate analysis of high-resolution survey mass spectra

Direct profiling of total lipid extracts on a hybrid LTQ Orbitrap mass spectrometer by high-resolution survey spectra clusters species of 11 major lipid classes into 7 groups, which are distinguished by their sum compositions and could be identified by accurately determined masses. Rapid acquisition of survey spectra was employed as a "top-down" screening tool that, together with the computational method of principal component analysis, revealed pronounced perturbations in the abundance of lipid precursors within the entire series of experiments. Altered lipid precursors were subsequently identified either by accurately determined masses or by in-depth MS/MS characterization that was performed on the same instrument. Hence, the sensitivity, throughput and robustness of lipidomics screens were improved without compromising the accuracy and specificity of molecular species identification. The top-down lipidomics strategy lends itself for high-throughput screens complementing ongoing functional genomics efforts.