Sensory evaluation of drinking water by consumer panels

The human senses play an important role in assessing the quality of food and of the environment. Particularly the chemical senses of taste and smell determine the pleasantness of foods and drinks and may provide a warning mechanism for the presence of more or less toxic contaminants. Even after the recent rapid development of powerful analytical techniques the human nose can easily detect trace amounts of chemicals at levels manytimes lower than the analytical detection limits.Although taste and odour assessment of drinking water has been practized inmany waterworks laboratories by small panels, relatively unreliable results were obtained and such sensory data played up till now only a minor role in the management of the water treatment plant. More sophisticated and reliable methods for sensory water quality evaluation are discussed. Special attention is given to the characteristics of the human senses of taste and smell, to which the methodology of sensory assessment should be better adapted. High numbers of observations on a sample are generally needed, for which purpose the use of large panels has to be realized. In this respect the help of large consumer panels is an alternative for the presently often used small laboratory groups. As an example the preliminary results of a large ongoing experiment of sensory water quality assessment by 2 consumer panels of 100 persons each in the Rotterdam area are discussed. Drinking water quality is judged at the consumer homes every week. The experiment started September 1979 and will be continued for one year.     

The direct measurement of ppm levels of uranium in soils using high-resolution Ge(Li) gamma-ray spectroscopy

The direct determination of ²³⁸U in various soil samples was done by measuring the 63.3-keV transition from the decay of the first daughter ²³⁴Th. Potential errors resulting from the chemical non-equilibrium of ²³⁸U with its daughters are thus avoided. The method sensitivity is 1 ppm compared to the 35 ppm obtainable by employing the 1001-keV gamma ray. A Ge(Li) gamma-ray spectrometer is the only analytical tool required. Examples are offered that demonstrate the usefulness of the technique for routine, inexpensive environmental monitoring of uranium. The technique also has the capability of providing information on the ²³⁸U/²³⁵U isotopic ratio.     

Virtual reality systems and research on the perception, simulation and presentation of environmental change

The ability of evolving data visualization techniques (e.g. video image-capture technology) to portray realistically both the sensuous and connotative properties of the molar environment and change within the environment has produces an abundance of environmental perception studies using various visualization technologies. Future growth in the application of these technologies to environmental change perception research requires consideration of three sets of issues: (1) the nature of the perceptual experiencing of environment; (2) simulation of thise experience; and (3) presentation of environmental displays to people engaged in the studies.     

Eric de Maré: between the functional and the beautiful

Eric de Maré’s photographs were very widely published in post-war Britain and his images may be seen to have influenced a generation of architects. Perhaps more than any polemic or lengthy rationale they expanded the possibilities of architectural design; his pioneering work on the photography of early industrial buildings seen in ‘The Functional Tradition’, published as an article in The Architectural Review in 1957 and subsequently as a book, helped to create a new language at a time ready for such change.

De Maré was part of the wider architectural culture of the Architectural Press and The Architectural Review, and acknowledged the influence of the long-time proprietor de Cronin Hastings as well as other contributors such as John Piper, Gordon Cullen and J.M. Richards. There are clear links with another major position in British architectural work of that period, the ‘New Brutalism': the Smithsons’ ideas of honesty of form and materials are very close to the lessons which were drawn from de Maré's photographic evidence, whilst drawing attention to the ordinary and unvalued was the common ground basic to both positions. More than this, his images of worn surfaces and ageing structures are informed by an acute architectural sensibility. De Maré's work represents a repudiation of the utopianism of Modernist practice and theory, in favour of a new kind of beauty, redemptive in the harshly utilitarian modern world.     

Dissolution of copper, tin, and iron from sintered tungsten-bronze spheres in a simulated avian gizzard, and an assessment of their potential toxicity to birds

The rates of dissolution of copper, tin, and iron from sintered tungsten-bronze spheres (51.1%W, 44.4%Cu, 3.9%Sn, 0.6%Fe, by mass) were measured in an in vitro simulated avian gizzard at pH 2.0, and 42C. Most of the spheres had disintegrated completely to a fine powder by day 14. Dissolution of copper, tin, and iron from the spheres was linear over time; all r>0.974; all P<0.001. The mean rate of release of copper, tin, and iron was 30.4 mg, 2.74 mg, and 0.38 mg per g tungsten-bronze per day, respectively. These rates of metal release were compared to those in published studies to determine whether the simultaneous ingestion of eight spheres of 3.48 mm diameter would pose a toxic risk to birds. The potential absorption rates of iron and tin (0.54 mg Fe/day, and 3.89 mg Sn/day) from eight tungsten-bronze spheres of total mass 1.42 g would not prove toxic, based on empirical studies of tin and iron ingestion in waterfowl. The release of 43.17 mg copper/day from eight tungsten-bronze spheres, while exceeding the daily copper requirements of domesticated birds, is far below the levels of copper known to cause copper toxicosis in birds. We conclude that sintered tungsten-bronze material made into gunshot, fishing weights, or wheel balance weights, would not pose a toxic risk to wild birds when ingested.     

The acute effect of bunker C oil and an oil dispersant on: 1 Serum glucose, serum sodium and gill morphology in both freshwater and seawater acclimated rainbow trout (Salmo gairdneri)

Bunker C oil and an oil dispersant were tested for physiological stress on both freshwater and saltwater acclimated rainbow trout. Both compounds tended to reduce serum glucose levels with Bunker C causing the more significant decrease (P < 0.08), indicating a possible dysfunction of the kidney. The freshwater treatment group showed a significant decrease in sodium levels (P < 0.01) when treated with a dispersant, while under similar conditions, saltwater acclimated fish show a very marked increase in serum sodium concentrations (P < 0.025). Those fluctuations in sodium levels are resultant from direct interference with the energy activated sodium transport systems of the gills. Microphotographs of gill filaments and lamellae show severe damage caused by the dispersant and dispersant/oil mixture with less impairment resultant from Bunker C exposure.     

Does oyster size matter for modelling trace metal bioaccumulation?

The aim of this study was assessing whether trace metal bioaccumulation models for oysters need to account for the effect of size-structured demography. To achieve this, we used a Bayesian generalised additive mixed modelling (BGAMM) approach. This nonparametric regression approach allowed us to estimate potentially nonlinear size effects of the oysters as well as random and structured spatial effects. Native oysters were collected from ten locations around the shoreline of Moreton Bay, a subtropical estuary in southeast Queensland, Australia. The soft-tissue of these sampled oysters were weighed (dry weight basis) and then analysed for Al, Cu, Fe, Mg, Mn and Zn. Of the six trace metals analysed, only Mg was found to have a significant (negative) effect of soft-tissue mass. The correlated spatial effects for Cu, Mn and Zn indicated that the source of these trace metals in the oysters was from anthropogenic inputs while the correlated spatial effects for Al and Mg indicated natural inputs. The correlated spatial effect for Fe was characterised by 'hotspot' concentrations in regions of Moreton Bay where algal blooms have previously occurred and consequently oysters might be useful as an indicator of algal blooms in the Bay. Overall, the absence of an observed size effect for five of the six trace metals indicates that bioaccumulation models do not necessarily need to account for size-structured demography therefore enabling simpler models to be used.     

The effect of depositional history on contaminated bed sediment stability

Experiments were conducted in an annular flume using a commercially available kaolinite clay as well as contaminated bed sediment from Hamilton Harbour (Ontario) to assess their stability against erosion. Critical shear stress for erosion was measured under different conditions of bed formation (quiescently deposited beds and shear deposited beds) as well as with and without the presence of a biostabilized bed. Results suggest that a biostabilized bed and a bed formed under a flowing condition, similar to a river scenario, will be more resistant against erosion than will a non-biostabilized bed and a bed formed under quiescent conditions. Up to three cycles of erosion and flocculation/deposition were observed to occur within one experiment. These results suggest that the depositional history and biostabilization of river bed sediments need to be seriously considered within sediment and contaminant transport models if meaningful estimates of sediment and contaminant source, fate and effect are to be generated and used for the management of our aquatic ecosystems.     

Analysis of point load test as a method for preliminary geotechnical classification of rocks

This paper deals with the analysis of the point load compression test made on irregular-shaped rock fragments, proposed in the late 50’s by Protodiakonov. An ample revision of the literature on the subject has been made, and a series of tests, using seven different types of rock materials, has been developed. The results obtained from these tests showed that parameters generally used in literature to relate the unconfined compressive (or tensile) strength of materials, resulting from point load tests, can lead to scattered results, due mainly to the scale effect, of great evidence in such tests. It seems possible to obtain compressive (and tensile) strength of rocks, if the ratio between failure load and the distance between load application poins, with a 3/2 exponent, is considered, in field work, as being the "point load strength index".

---

Resume L’article présente une analyse critique de l’essai de compression sur échantillons irréguliers de roche, proposé par Protodiakonov vers la fin des années 50. Tout d’abord on a fait une révision de la littérature disponible sur le sujet et, après, une série d’essais sur sept types différents de matériaux. Les résultats obtenus ont montré que les paramètres plus utilisés, dans la littérature, pour définir la résistance à la compression (ou traction) des roches, d’après les essais ponctuels, peuvent provoquer une dispersion très importante des résultats. Cependant, il nous semble valable de suggérer la possibilité de déterminer, sur le chantier, la résistance à la compression (ou traction) des roches, si l’on considère le quotient entre la charge de rupture et la distance entre les deux points d’application de cette charge, le dénominateur à la puissance 3/2, comme "l’indice de charge ponctuelle".