Laser-Printed Plasmonic Metasurface Supporting Bound States in the Continuum Enhances and Shapes Infrared Spontaneous Emission of Coupled HgTe Quantum Dots

In order to advance the development of quantum emitter-based devices, it is essential to enhance light-matter interactions through coupling between semiconductor quantum dots with high quality factor resonators. Here, efficient tuning of the emission properties of HgTe quantum dots in the infrared spectral region is demonstrated by coupling them to a plasmonic metasurface that supports bound states in the continuum. The plasmonic metasurface, composed of an array of gold nanobumps, is fabricated using single-step direct laser printing, opening up new opportunities for creating exclusive 3D plasmonic nanostructures and advanced photonic devices in the infrared region. A 12-fold enhancement of the photoluminescence in the 900–1700 nm range is observed under optimal coupling conditions. By tuning the geometry of the plasmonic arrays, controllable shaping of the emission spectra is achieved, selectively enhancing specific wavelength ranges across the emission spectrum. The observed enhancement and shaping of the emission are attributed to the Purcell effect, as corroborated by systematic measurements of radiative lifetimes and optical simulations based on the numerical solution of Maxwell's equations. Moreover, coupling of the HgTe photoluminescence to high quality factor modes of the metasurface improves emission directivity, concentrating output within an ≈20° angle.     

Over-phase control of inverter multiphase AC linear drives

The over-phase control method of inverter multiphase (i.e. having number of phases more than four) AC linear drives is developed by the authors of this paper. Its application allows to improve considerably a number of the drive technical-and-economic characteristics (speed of response, reliability, mass-and-overall dimensions, etc.). This control method can be used not only in the field of electrical AC drives, but also in the systems for electromagnetic stirring of molten metals. In these systems the application of one of versions of the over-phase-control for multiphase inverter-fed linear stators allows to increase the intensity of electromagnetic stirring of molten metals by providing with continuous change of the quantity, space location, and configuration of the vortex areas in the metal mass during the process of the above-mentioned stirring.     

Amorphous Boron Nitride: A Universal,Ultrathin Dielectric For 2D Nanoelectronics

Next‐generation nanoelectronics based on 2D materials ideally will require reliable, flexible, transparent, and versatile dielectrics for transistor gate barriers, environmental passivation layers, capacitor spacers, and other device elements. Ultrathin amorphous boron nitride of thicknesses from 2 to 17 nm, described in this work, may offer these attributes, as the material is demonstrated to be universal in structure and stoichiometric chemistry on numerous substrates including flexible polydimethylsiloxane, amorphous silicon dioxide, crystalline Al₂O₃, other 2D materials including graphene, 2D MoS₂, and conducting metals and metal foils. The versatile, large area pulsed laser deposition growth technique is performed at temperatures less than 200 °C and without modifying processing conditions, allowing for seamless integration into 2D device architectures. A device‐scale dielectric constant of 5.9 ± 0.65 at 1 kHz, breakdown voltage of 9.8 ± 1.0 MV cm^?1, and bandgap of 4.5 eV were measured for various thicknesses of the ultrathin a‐BN material, representing values higher than previously reported chemical vapor deposited h‐BN and nearing single crystal h‐BN.     

Adsorption of methyl mercaptan on activated carbons

Activated carbons of different origins were studied as methyl mercaptan adsorbents in wet, dry, and oxidizing conditions. The materials were characterized using adsorption of nitrogen, Boehm titration, and thermal analysis. Investigation was focused on the feasibility of the removal of methyl mercaptan on activated carbons and on the role of surface chemistry and porosity in the adsorption/oxidation processes. The results showed relatively high capacities of carbons for removal of CH3SH. The amount adsorbed depends on the surface features. Methyl mercaptan, in general, is oxidized to disulfides, which, depending on the chemistry of the carbon surface, can be converted to sulfonic acid due to the presence of water and active radicals.     

Termites as human foods—A comprehensive review

Global food production is anticipated to rise along with the growth of the global population. As a result, creative solutions must be devised to ensure that everyone has access to nutritious, affordable, and safe food. Consequently, including insects in diets has the potential to improve global food and nutrition security. This paper aims to share recent findings by covering edible termites as the main aspect, from their consumption record until consumer acceptance. A total of 53 termite species are reported as edible ones and distributed in 6 biogeographic realms. Generally, termites have a nutrient composition that is suitable for human consumption, and cooked termites are a better dietary choice than their raw counterparts. Besides, increasing customer interest in eating termite-based food can be achieved by making it more palatable and tastier through various cooking processes, that is, boiling, frying, grilling, roasting, smoking, and sun-drying. Moreover, edible termites can also be used as a new source of medication by exhibiting antimicrobial activity. Regarding their advantages, it is strongly encouraged to implement a seminatural rearing system to sustain the supply of edible termites. Overall, this paper makes it evident that termites are an important natural resource for food or medicine. Hence, the long-term objective is to stimulate scientific inquiry into the potential of edible insects as an answer to the problem of global food security.     

Influence of small dozes ultra-violet radiation on motion of dislocation in alkali-halide crystals

The purpose of this work was research into influence of ultra-violet radiation on size of run of regional and screw dislocations in beams of dislocation sockets, formed at indentation surface of alkali-halide crystals. In experiments it was used crystals NaCl, with the quantitative maintenance of impurity 10-2 -10-3weight,, the wave length of UV-radiation λ=250 nanometers, the sizes of samples 10mm× 20mm× 2mm,temperature of samples was constant T=290 K.It is established that indentation and the simultaneous irradiation of samples a ultraviolet is increases size of run of head dispositions in dislocation sockets..It is marked, that influence UV-radiation nonequivalence for various times of an exposition. At small times (till 5 minutes) the size of run grows. The length of beams increases on ～ 50 ,. At the further increase in time of influence of a ultraviolet the length of beams is reduced till the sizes corresponding stressing without an irradiation (Figs. 1, 2, 3). The effect is observed on dislocation beams of regional and screw orientations and most expressed at small loadings (in our experiments-10 grams) (Fig. 3).Observable effects are explained from positions dislocation-exciton interactions. At UV-radiation exciton cooperates with the charged step on a disposition, causing movement of a step along a disposition on one internuclear distance. Due to this interaction overcoming by a disposition of a grid of stoppers is facilitated.Big times of endurance cause a relaxation of pressure directly in a print that provides convertible movement of dispositions in area of a print and as consequence, reduction of length of beams of dislocation sockets.     

Investigation of Chemical Constituents of Eranthis longistipitata (Ranunculaceae): Coumarins and Furochromones

Aqueous-ethanol extracts (70%) from the leaves of Eranthis longistipitata Regel. (Ranunculaceae Juss.)—collected from natural populations of Kyrgyzstan—were studied by liquid chromatography with high-resolution mass spectrometry (LC-HRMS). There was no variation of the metabolic profiles among plants that were collected from different populations. More than 160 compounds were found in the leaves, of which 72 were identified to the class level and 58 to the individual-compound level. The class of flavonoids proved to be the most widely represented (19 compounds), including six aglycones [quercetin, kaempferol, aromadendrin, 6-methoxytaxifolin, phloretin, and (+)-catechin] and mono- and diglycosides (the other 13 compounds). In the analyzed samples of E. longistipitata, 14 fatty acid–related compounds were identified, but coumarins and furochromones that were found in E. longistipitata were the most interesting result; furochromones khelloside, khellin, visnagin, and cimifugin were found in E. longistipitata for the first time. Coumarins 5,7-dihydroxy-4-methylcoumarin, scoparone, fraxetin, and luvangetin and furochromones methoxsalen, 5-O-methylvisammioside, and visamminol-3′-O-glucoside were detected for the first time in the genus Eranthis Salisb. For all the above compounds, the structural formulas are given. Furthermore, detailed information (with structural formulas) is provided on the diversity of chromones and furochromones in other representatives of Eranthis. The presence of chromones in plants of the genus Eranthis confirms its closeness to the genus Actaea L. because chromones are synthesized by normal physiological processes only in these members of the Ranunculaceae family.     

Staphylococcus aureus Exfoliative Toxin E,Oligomeric State and Flip of P186: Implications for Its Action Mechanism

Staphylococcal exfoliative toxins (ETs) are glutamyl endopeptidases that specifically cleave the Glu381-Gly382 bond in the ectodomains of desmoglein 1 (Dsg1) via complex action mechanisms. To date, four ETs have been identified in different Staphylococcus aureus strains and ETE is the most recently characterized. The unusual properties of ETs have been attributed to a unique structural feature, i.e., the 180° flip of the carbonyl oxygen (O) of the nonconserved residue 192/186 (ETA/ETE numbering), not conducive to the oxyanion hole formation. We report the crystal structure of ETE determined at 1.61 Å resolution, in which P186(O) adopts two conformations displaying a 180° rotation. This finding, together with free energy calculations, supports the existence of a dynamic transition between the conformations under the tested conditions. Moreover, enzymatic assays showed no significant differences in the esterolytic efficiency of ETE and ETE/P186G, a mutant predicted to possess a functional oxyanion hole, thus downplaying the influence of the flip on the activity. Finally, we observed the formation of ETE homodimers in solution and the predicted homodimeric structure revealed the participation of a characteristic nonconserved loop in the interface and the partial occlusion of the protein active site, suggesting that monomerization is required for enzymatic activity.