Proteomic Analysis of Embryogenesis and the Acquisition of Seed Dormancy in Norway Maple (Acer platanoides L.)

The proteome of zygotic embryos of Acer platanoides L. was analyzed via high-resolution 2D-SDS-PAGE and MS/MS in order to: (1) identify significant physiological processes associated with embryo development; and (2) identify changes in the proteome of the embryo associated with the acquisition of seed dormancy. Seventeen spots were identified as associated with morphogenesis at 10 to 13 weeks after flowering (WAF). Thirty-three spots were associated with maturation of the embryo at 14 to 22 WAF. The greatest changes in protein abundance occurred at 22 WAF, when seeds become fully mature. Overall, the stage of morphogenesis was characterized by changes in the abundance of proteins (tubulins and actin) associated with the growth and development of the embryo. Enzymes related to energy supply were especially elevated, most likely due to the energy demand associated with rapid growth and cell division. The stage of maturation is crucial to the establishment of seed dormancy and is associated with a higher abundance of proteins involved in genetic information processing, energy and carbon metabolism and cellular and antioxidant processes. Results indicated that a glycine-rich RNA-binding protein and proteasome proteins may be directly involved in dormancy acquisition control, and future studies are warranted to verify this association.     

Analysis of electromigration phenomenon in thick-film and LTCC structures at elevated temperature

Studies on electromigration phenomenon in thick-film structures on alumina and LTCC substrates are presented in this paper. The effects of storage of Au and Ag electrode patterns in temperature range up to 300 °C under voltage bias were examined. The leakage characteristics of electrodes with 100 μm spacing at 50 V dc bias as a function of time and temperature are presented and analyzed. Scanning electron microscope (SEM) equipped with the energy-dispersive X-ray spectroscopy (EDX) detector was applied for determination of metal ions transport. Test structures with Au-based conductive material are much more resistant to electromigration than Ag-based layers.     

The comparative analysis of standards used in Poland for trenchless rehabilitation of sewage pipes and the problems in design of resin liners

The paper presents not only the comparative analysis of the three standards (German, Danish and American) commonly used in Poland for the design of resin liners, but also the chosen problems involved with the design. The attached examples of calculations give a chance to investigate the influence of noticed differences in basic assumptions on the final results including the minimum, acceptable wall thickness of the linings used for trenchless renovation of gravitational sewers.     

Extended HALS algorithm for nonnegative Tucker decomposition and its applications for multiway analysis and classification

Analysis of high dimensional data in modern applications, such as neuroscience, text mining, spectral analysis, chemometrices naturally requires tensor decomposition methods. The Tucker decompositions allow us to extract hidden factors (component matrices) with different dimension in each mode, and investigate interactions among various modalities. The alternating least squares (ALS) algorithms have been confirmed effective and efficient in most of tensor decompositions, especially Tucker with orthogonality constraints. However, for nonnegative Tucker decomposition (NTD), standard ALS algorithms suffer from unstable convergence properties, demand high computational cost for large scale problems due to matrix inverse, and often return suboptimal solutions. Moreover they are quite sensitive with respect to noise, and can be relatively slow in the special case when data are nearly collinear. In this paper, we propose a new algorithm for nonnegative Tucker decomposition based on constrained minimization of a set of local cost functions and hierarchical alternating least squares (HALS). The developed NTD-HALS algorithm sequentially updates components, hence avoids matrix inverse, and is suitable for large-scale problems. The proposed algorithm is also regularized with additional constraint terms such as sparseness, orthogonality, smoothness, and especially discriminant. Extensive experiments confirm the validity and higher performance of the developed algorithm in comparison with other existing algorithms.     

Toughening of syndiotactic polypropylene with chalk

We hypothesized that polymer crystal anisotropy is advantageous for toughening of polymer composites involving easy slip network of oriented crystalline layers around filler particles. To this end, composites of syndiotactic polypropylene (sPP) with high concentration of submicrometer calcium carbonate particles were prepared and examined because usual sPP crystals exhibit high packing anisotropy. The specific orientation of sPP lamellae around chalk grains was found, which is supposed to facilitate the plastic deformation of polymer matrices. The compression molded bars of the composite exhibited markedly higher Izod impact strength than those of neat sPP. Toughening was even enhanced in the injection molded composite, for which 4.5‐fold increase in the impact strength was achieved. Injection‐induced orientation of the disordered form I sPP crystals was enhanced in the composite. The injection molded tensile specimens exhibited also a good drawability. Debonding at chalk–sPP interface occurred both during the impact and tensile tests facilitating the plastic deformation of sPP matrix. Chalk did not have any significant influence on the thermal properties of the composites but it affected the rheological behavior, increasing the loss and storage moduli, and the viscosity. Highly filled sPP composite exhibited solid‐like behavior in a molten state with the storage modulus exceeding the loss modulus in the entire frequency range. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43651.     

Heavy Metals in Stream Sediments from the Coquimbo region (Chile): Effects of Sustained Mining and Natural Processes in a Semi-arid Andean Basin

Abstract.   Active sediments from the Elqui River in Chile were sampled 4 times at 10 sites during 2000. Concentrations of Ag, Ba, Cd, Co, Cr, Hg, Mn, Mo, Ni, Pb, Sr, Ti, V, Al, Ca, Fe, K, Mg, Na, P, and S were normal. Zinc levels were clearly high, and those of Cu (hundred to thousands ppm) and As (tens to hundreds ppm) were highly anomalous. Dissolved Cu (0.1-12.7 ppm) and Zn (0.2-2.2 ppm) levels were also very high. The anomalies of the upper tributaries are due to the El Indio–Tambo Au-Cu-As district and large hydrothermal alteration zones at altitudes between 3500–4500 m. Lower on the river, old and active tailing waste deposits and on-going mining operations in the Talcuna Cu (Pb) district are responsible. Partially eroded tailing deposits in the alluvial plain of the Elqui River and its tributaries, and especially in the El Indio-Tambo district, after mine closure in 2000, warrant special attention.     

Effect of polymer structure on the molecular dynamics and thermal behavior of poly(allyl acetoacetate) and copolymers

In this paper, dielectric and calorimetric studies of the small-molecule glass former allyl acetoacetate monomers as well as its newly synthetized homopolymer and copolymers with different styrene composition were performed in both the liquid and glassy states. The molecular dynamics studies by the broadband dielectric spectroscopy and the stochastic temperature modulated differential scanning calorimetry enabled us to explore relaxation processes of examined materials in the wide frequency range. We found that the copolymers reveal two co-existing glass transitions characterized by the glass transition temperatures, which are very close to those of the corresponding homopolymers. These results suggest that the copolymers exhibited some sequences of acetoacetate units with a microphase-separated morphology in agreement with the value of reactivity ratio previously determined. We investigated effects of copolymerization compositions on the glass transition temperature, the isobaric fragility index, the dielectric and calorimetric intensity, and the dynamic heterogeneity on the glass transitions of the materials.     

Cavitation during deformation of semicrystalline polymers

Cavitation phenomenon is observed during deformation in many semicrystalline polymers above their glass transition temperature. Numerous voids (cavities) both nanometer and micrometer size are formed inside amorphous phase between lamellae during deformation of a polymer. The cavitation is observed only in tension, never during compression or shearing. Most often used methods of voids detection are: microscopies (SEM, TEM, AFM and light microscopy), small angle X-ray scattering and measurements of density. Usually the voids are detected close to yielding or at yielding, strongly suggesting that yielding is often caused by cavitation. However, there is a competition between two processes: breaking of amorphous phase leading to cavitation and plastic deformation of lamellar crystals. Which process occurs first depends on the relation between compliances of those two phases. If the crystals are weak and defected their deformation occurs (mostly by chain slips mechanism) without cavitation. If the crystals in a polymer are thick and more perfect then the barrier for their deformation, represented by shear yielding stress, is increased and the cavitation sets in first and yielding is determined by the stress needed for cavitation. Further deformation involves deformation of crystals due to rapid local change of stress around voids. The influence of different morphological factors: crystal thickness, crystallinity degree, arrangement of crystalline elements (e.g. in spherulites), morphology of amorphous phase (free volume, entanglements, tie molecules) were analyzed. Experimental factors, such as temperature of deformation and rate of deformation influence remarkably the formation of cavities. Cavitation is generated at points where a high local triaxial state of stress is developed. Triaxiality of stress can be amplified by a notch, even very mild notch with large radius of curvature stimulates generation of cavities. Evolution of nano-cavities into micro-cavities and change of their shapes with increasing deformation were evidenced by SAXS. Initially voids are oriented perpendicularly to deformation direction, however, with increasing elongation they become oriented along deformation direction. Stress whitening is visual sign of cavitation and is caused be light scattering either by microvoids or by assemblies of nanovoids.