Probing the viscoelastic properties of brominated isobutylene‐co‐p‐methylstyrene rubber/tackifier blends using a rubber process analyzer

The viscoelastic behavior of brominated isobutylene‐co‐p‐methylstyrene (BIMS) rubber/hydrocarbon resin blends and BIMS/phenol formaldehyde resin blends was studied with the use of a rubber process analyzer. Dynamic mechanical analysis and scanning electron microscopy were used to evaluate the compatibility between the BIMS/tackifier blends. Strain sweep tests at temperature below the softening point of the tackifiers showed the formation of resin–resin networks in the incompatible BIMS/phenolic resin blends. However, resin–resin network was not prominent in the case of the compatible BIMS/hydrocarbon resin blends. Frequency sweep tests were performed at the strain amplitude within the linear region at several temperatures and the variations of shear storage modulus, G′ and complex viscosity, η* against frequency were recorded. The tackifying resins modified the viscoelastic properties of the BIMS rubber by reducing the storage modulus at lower frequency and by increasing the storage modulus at higher frequencies. However, this action was found to be highly dependent on (a) rubber‐tackifier compatibility, (b) blend proportions, and (c) test temperature. Furthermore, stress relaxation measurements of the BIMS/tackifier blends at temperature below the softening point of the tackifiers showed longer period of relaxation for the incompatible BIMS/phenolic resin blends. POLYM. ENG. SCI., 2008. © 2008 Society of Plastics Engineers     

Construction defect management using a telematic digital workbench

Real-time, rich-media data communication between the construction site and the off-site design office is becoming one of the important research areas in information technology for construction. This paper presents the concept of a telematic digital workbench, a horizontal tabletop user interface integrating mobile computing and wireless communication to facilitate synchronous construction site to office collaboration. We demonstrate the capabilities and potentials of this system concept for construction defect management. The on-site crew uses a handheld mobile device to collect defect information and transfers the information to the design office through wireless communication by sending the information to a database listener. The digital workbench application monitors the database and synchronizes the location of the visual information on the site with the 3D model on the server. Integrated with 3D viewing capability in a CAD system, designers can interact with the combined model/site data using a horizontal and vertical screen. A case study compared the telematic digital workbench against paper-based and Pocket PC-based methods for defect management in a controlled laboratory experiment. The case study results show that the telematic digital workbench has the potential to improve the accuracy of matching site data to digital data and reduce information loss between site and office collaboration.     

From DSM-Based Planning to Design Process Simulation: A Review of Process Scheme Logic Verification Issues

Planning product development processes (PDP), and particularly new product development (NPD) processes, is complex and challenging. The plan should reflect the product-related knowledge, including the influences of performing changes in one product component on the need to rework the design of other components. Given the complexity, dynamics, and uncertainties of design processes (DPs), the plan evaluation requires simulation tools. The design structure matrix (DSM) is a known method for DP planning. However, the DSM itself does not express all the relevant information required for defining process logic. Many logic interpretations are applicable in different business cases; yet, a consistent method of transforming a DSM-based plan to a logically correct concurrent process model in the case of iterative activities is lacking. A gap was identified between the literature concerning activities sequencing based on DSM and the process modeling literature concerning process verification. This survey systematically classifies the approaches used in DSM-based process planning, and discusses their strengths and limitations with problems related to process modeling logic verification of iterative processes. Demonstration of the logic differences emphasizes the need for simulation-based decision making according to the specific process attributes.     

Dust in the Earth system: the biogeochemical linking of land,air and sea

Understanding the response of the Earth's climate system to anthropogenic perturbation has been a pressing priority for society since the late 1980s. However, recent years have seen a major paradigm shift in how such an understanding can be reached. Climate change demands analysis within an integrated 'Earth-system' framework, taken to encompass the suite of interacting physical, chemical, biological and human processes that, in transporting and transforming materials and energy, jointly determine the conditions for life on the whole planet. This is a highly complex system, characterized by multiple nonlinear responses and thresholds, with linkages often between apparently disparate components. The interconnected nature of the Earth system is wonderfully illustrated by the diverse roles played by atmospheric transport of mineral 'dust', particularly in its capacity as a key pathway for the delivery of nutrients essential to plant growth, not only on land, but perhaps more importantly, in the ocean. Dust therefore biogeochemically links land, air and sea. This paper reviews the biogeochemical role of mineral dust in the Earth system and its interaction with climate, and, in particular, the potential importance of both past and possible future changes in aeolian delivery of the micro-nutrient iron to the ocean. For instance, if, in the future, there was to be a widespread stabilization of soils for the purpose of carbon sequestration on land, a reduction in aeolian iron supply to the open ocean would occur. The resultant weakening of the oceanic carbon sink could potentially offset much of the carbon sequestered on land. In contrast, during glacial times, enhanced dust supply to the ocean could have 'fertilized' the biota and driven atmospheric CO(2) lower. Dust might even play an active role in driving climatic change; since changes in dust supply may affect climate, and changes in climate, in turn, influence dust, a 'feedback loop' is formed. Possible feedback mechanisms are identified, recognition of whose operation could be crucial to our understanding of major climatic transitions over the past few million years.     

Thermally and electrically switchable gratings based on polymer-ball-type polymer-dispersed liquid-crystal films

We focus on the fabrication and study of controllable holographic gratings based on azo-dye-doped and undoped polymer-ball-type polymer-dispersed liquid-crystal films. Experimental results indicate that the next step of photopolymerization of the sample with the illumination of Ar+ laser beams after UV curing causes a latent density grating to be recorded. This grating is formed by a selective secondary photopolymerization. Heating and applying a voltage change the structure of the liquid crystal and induce the appearance of the latent grating. Diffraction efficiencies versus temperature, voltage, and state of polarization are studied for both dye-doped and undoped cells and are found to be quite different. This discrepancy is attributable to the reorientation effect of liquid crystals through their interaction with the photo-induced adsorption of the doped dyes on the surface of polymer balls in the dye-doped cell.     

Biomimetic Representation with Enzyme Genetic Programming

Erratum

Biomimetic Representation with Enzyme Genetic Programming     

SWAN: A distributed knowledge infrastructure for Alzheimer disease research

SWAN – a Semantic Web Application in Neuromedicine – is a project to develop an effective, integrated scientific knowledge infrastructure for Alzheimer Disease (AD) researchers, enabled by Semantic Web technology and deployed on Alzforum (www.alzforum.org), a scientific web community for AD research. This infrastructure may later be deployed for research communities in other neuromedical disorders. SWAN incorporates the full biomedical research knowledge lifecycle in its ontological model, including support for personal data organization, hypothesis generation, experimentation, lab data organization, and digital pre-publication collaboration. Community, laboratory, and personal digital resources may all be organized and interconnected using SWAN's common semantic framework.     

Variation of composition of an enteric formulation based on Kollicoat MAE 30 D

Using a formulation described previously with Kollicoat MAE 30 D as the film-forming agent, the effect of variations in plasticizer type and quantity and talc concentration on the preparation and processing of spray-coating suspensions and the properties of isolated films and film-coated caffeine tablets prepared using them was investigated. In the preparation and processing of spray-coating suspensions, the plasticizers polyethylene glycol (PEG) 400, PEG1500, and TEC (triethyl citrate) tended to coagulate at all concentrations investigated, while Cremophor RH 40 coagulated above 10% (expressed as a percentage of the mass of the film-forming agent used). Analogous preparations using propylene glycol (PG), PEG6000, and Lutrol F 68, on the other hand, were found to be stable at all concentrations. The instability was not caused by the Kollicoat MAE 30 D polymer dispersion as such, but by interactions between the finely dispersed pigments and other formulation ingredients. Equivalent nonpigmented preparations are stable and do not coagulate. With all the plasticizers investigated, the minimum film-forming temperature (MFT) fell, albeit to differing degrees, as the amount of plasticizer increased. Similarly, the tensile strength of isolated films declined as plasticizer concentration increased, while the reverse was true as regards their elongation at break. Whereas neither the subsequent disintegration time nor the rate of release of active ingredient at pH 6.8 was significantly affected by the various plasticizer additives, the different film-coated tablet formulations with a core containing a powerful disintegrant exhibited varying degrees of permeability to simulated gastric fluid. With PEG6000, permeability increased as the plasticizer concentration increased, while Lutrol F 68 provided an optimum barrier at 20%, and PG provided a good barrier between 10% and 30%. No gastroresistance was obtained with TEC at 10%. Only the best plasticizer formulations were used in the trials with different talc concentrations, namely, those formulations with 20% PEG6000, 20% Lutrol F 68, 20% PG, and 10% PG. When talc was added, the MFT rose, reaching its maximum at 13% talc (as a proportion of the film-forming agent). In the test for gastroresistance, film-coated caffeine tablets without talc absorbed distinctly more acid than those containing talc. Above 27% talc, the acid resistance improved only insignificantly. On the other hand, during this test, only a maximum of 3% of the active ingredient was released into the gastric juice. Of the variants investigated, the formulation with 20% PG and 27% talc performed best.