Study and design of a hybrid wind–diesel-compressed air energy storage system for remote areas

Remote areas around the world predominantly rely on diesel-powered generators for their electricity supply, a relatively expensive and inefficient technology that is responsible for the emission of 1.2 million tons of greenhouse gas (GHG) annually, only in Canada [1]. Wind–diesel hybrid systems (WDS) with various penetration rates have been experimented to reduce diesel consumption of the generators. After having experimented wind–diesel hybrid systems (WDS) that used various penetration rates, we turned our focus to that the re-engineering of existing diesel power plants can be achieved most efficiently, in terms of cost and diesel consumption, through the introduction of high penetration wind systems combined with compressed air energy storage (CAES). This article compares the available technical alternatives to supercharge the diesel that was used in this high penetration wind–diesel system with compressed air storage (WDCAS), in order to identify the one that optimizes its cost and performances. The technical characteristics and performances of the best candidate technology are subsequently assessed at different working regimes in order to evaluate the varying effects on the system. Finally, a specific WDCAS system with diesel engine downsizing is explored. This proposed design, that requires the repowering of existing facilities, leads to heightened diesel power output, increased engine lifetime and efficiency and to the reduction of fuel consumption and GHG emissions, in addition to savings on maintenance and replacement cost.     

Anti-inflammatory activity of Devil’s claw in vitro systems and their active constituents

Cell suspension and Agrobacterium rhizogenes-transformed hairy root cultures of Devil’s claw (Harpagophytum procumbens), an African plant with high medicinal value, were cultivated in shake-flasks. A purification scheme to isolate their main active constituents (the phenylethanoid glycosides verbascoside, leucosceptoside A, β-OH-verbascoside and martynoside; structurally identified by NMR and LC–MS) was then developed, and their concentrations in the cultures were determined by UV spectrometry following HPLC separation. Preparations, extracts and the isolated phenylethanoid glycosides from the H. procumbens in vitro systems were tested on isolated murine macrophages to study their effects on nitric oxide (NO) and cytokine (TNF-α, IL-6) release and the expression of COX-1 and COX-2. They were also added to human serum to investigate their effects on the classical pathway of complement activation. The results indicate that the extracts and preparations of the in vitro systems, and pure verbascoside (their main active constituent), had strong anti-inflammatory properties, comparable to or even higher than that of pure harpagoside (a major anti-inflammatory constituent of intact Devil’s claw tubers). Thus, they have potential as new anti-inflammatory agents.     

Layers obtained on aluminum by nanopowder deposition and subsequent electron beam scanning

The scanning circular rotating motion of the electron beam is used for embedding unclad TiCN nanoparticles in the aluminum matrix. The most appropriate treatment conditions for obtaining layers with significant thickness and high microhardness are reported. Layers with thickness 14–33?µm and microhardness 562–798?kg/mm², which is 16–22 times higher than the substrate microhardness, are obtained. Possible strengthening mechanisms of the layers are discussed. The layers, chemical, and phase compositions are investigated by EDX detector of SEM and XRD. The complex investigation is completed with TEM analysis. Incorporated TiCN nanoparticles are observed in the aluminum matrix. Layers with such characteristics could be convenient for details to which high surface hardness and light, soft, and plastic base metal are required.     

Reactive synthesis with maximum realizability of linear temporal logic specifications

Acta Informatica - A challenging problem for autonomous systems is to synthesize a reactive controller that conforms to a set of given correctness properties. Linear temporal logic (LTL) provides a...     

Variations in Fatty Acids,Phospholipids and Sterols During the Seed Development of a High Oleic Sunflower Variety

The changes in the content and composition of total fatty acids, phospholipids and sterol esters, and their fatty acids, and of free sterols and tocopherols in developing seeds of a selection of high oleic acid sunflower varieties grown in Bulgaria were examined over a period of 15th to 90th day after flowering by means of various chromatographic methods. Under the climatic and geographical conditions typical for the South-East Balkans phospholipid, sterol-, sterol ester- and tocopherol- species are formed practically completely in the first 15 days after flowering. Until the 90th day, only quantitative changes were detected to give a product with 65% oil content, 1% phospholipids, 0.3% total sterols and 0.09% tocopherols. Oleic acid is the main component in all acyl derivatives, reaching 85% of the total fatty acids while palmitic and stearic acid content is about 4% each. The product is a good quality HOSO with beneficial content of FA and good prospects as a salad and cooking oil.     

Serum Concentrations of Endothelin-1 and Matrix Metalloproteinases-2, -9 in Pre-Hypertensive and Hypertensive Patients with Type 2 Diabetes

Endothelin-1 (ET-1) is one of the most potent vasoconstrictors known to date. While its plasma or serum concentrations are elevated in some forms of experimental and human hypertension, this is not a consistent finding in all forms of hypertension. Matrix metalloproteinases -2 and -9 (MMP-2 and MMP-9), which degrade collagen type IV of the vascular basement membrane, are responsible for vascular remodeling, inflammation, and atherosclerotic complications, including in type 2 diabetes (T2D). In our study, we compared concentrations of ET-1, MMP-2, and MMP-9 in pre-hypertensive (PHTN) and hypertensive (HTN) T2D patients with those of healthy normotensive controls (N). ET-1, MMP-2, and MMP-9 were measured by ELISA. Concentrations of ET-1 in PHTN and N were very similar, while those in HTN were significantly higher. Concentrations of MMP-2 and MMP-9 in PHTN and HTN were also significantly higher compared to N. An interesting result in our study is that concentrations of MMP-2 and MMP-9 in HTN were lower compared to PHTN. In conclusion, we showed that increased production of ET-1 in patients with T2D can lead to long-lasting increases in blood pressure (BP) and clinical manifestation of hypertension. We also demonstrated that increased levels of MMP-2 and MMP-9 in pre-hypertensive and hypertensive patients with T2D mainly reflect the early vascular changes in extracellular matrix (ECM) turnover.     

Chemical deposition of Al2O3 thin films on Si substrates

Uniform Al₂O₃ films were deposited on silicon substrates by the sol–gel process from stable coating solutions. The technological procedure includes spin coating deposition and investigating the influence of the annealing temperature on the dielectric properties. The layers were studied by Fourier transform infrared spectroscopy and Scanning Electron Spectroscopy. The electrical measurements have been carried out on metal–insulator–semiconductor (MIS) structures. The C–V curves show a negative fixed charge at the interface and density of the interface state, Dit, 3.7 × 10¹¹ eV^− 1cm^− 2 for annealing temperature at 750 °C.