Highly stable Fe/γ‐Al2O3 catalyst for catalytic wet peroxide oxidation

BACKGROUND: A highly stable Fe/γ‐Al₂O₃ catalyst for catalytic wet peroxide oxidation has been studied using phenol as target pollutant. The catalyst was prepared by incipient wetness impregnation of γ‐Al₂O₃ with an aqueous solution of Fe(NO₃)₃· 9H₂O. The influence of pH, temperature, catalyst and H₂O₂ doses, as well as the initial phenol concentration has been analyzed. RESULTS: The reaction temperature and initial pH significantly affect both phenol conversion and total organic carbon removal. Working at 50 °C, an initial pH of 3, 100 mg L^?1 of phenol, a dose of H₂O₂ corresponding to the stoichiometric amount and 1250 mg L^?1 of catalyst, complete phenol conversion and a total organic carbon removal efficiency close to 80% were achieved. When the initial phenol concentration was increased to 1500 mg L^?1, a decreased efficiency in total organic carbon removal was observed with increased leaching of iron that can be related to a higher concentration of oxalic acid, as by‐product from catalytic wet peroxide oxidation of phenol. CONCLUSION: A laboratory synthesized γ‐Al₂O₃ supported Fe has shown potential application in catalytic wet peroxide oxidation of phenolic wastewaters. The catalyst showed remarkable stability in long‐term continuous experiments with limited Fe leaching, < 3% of the initial loading. Copyright © 2010 Society of Chemical Industry     

Microstructural Evolution in Liquid-Phase-Sintered SiC: Part III, Effect of Nitrogen-Gas Sintering Atmosphere

Effects of N₂ sintering atmosphere and the starting SiC powder on the microstructural evolution of liquid-phase-sintered (LPS) SiC were studied. It was found that, for the β-SiC starting powder case, there was complete suppression of the β→α phase transformation, which otherwise goes to completion in Ar atmosphere. It was also found that the microstructures were equiaxed and that the coarsening was severely retarded, which was in contrast with the Ar-atmosphere case. Chemical analyses of the specimens sintered in N₂ atmosphere revealed the presence of significant amounts of nitrogen, which was believed to reside mostly in the intergranular phase. It was argued that the presence of nitrogen in the LPS SiC helped stabilize the β-SiC phase, thereby preventing the β→α phase transformation and the attendant formation of elongated grains. To investigate the coarsening retardation, internal friction measurements were performed on LPS SiC specimens sintered in either Ar or N₂ atmosphere. For specimens sintered in N₂ atmosphere, a remarkable shift of the grain-boundary sliding relaxation peak toward higher temperatures and very high activation energy values were observed, possibly due to the incorporation of nitrogen into the structure of the intergranular liquid phase. The highly refractory and viscous nature of the intergranular phase was deemed responsible for retarding the solution–reprecipitation coarsening in these materials. Parallel experiments with specimens sintered using α-SiC starting powders further reinforce these arguments. Thus, processing of LPS SiC in N₂ atmosphere open the possibility of tailoring their microstructures for room-temperature mechanical properties and for making high-temperature materials that are highly resistant to coarsening and creep.     

Pheromone Response Inhibitors of the Corn Stalk Borer Sesamia nonagrioides. Biological Evaluation and Toxicology

The behavioral activity of some trifluoromethyl ketones (TFMKs) as inhibitors of the pheromone activity of the corn stalk borer Sesamia nonagrioides (Lef.) (Lepidoptera: Noctuidae) is reported. The most closely-related analogue to the pheromone tested, (Z)-11-hexadecenyl trifluoromethyl ketone (Z11-16:TFMK), elicited a significant decrease in the number of male catches in traps baited with mixtures with the pheromone in 1:1 and 10:1 ratios in comparison to the pheromone alone. The E isomer of the analogue as well as two highly hydrated ketones, 3-octylthio-1,1,1-trifluoropropan-2-one (OTFP) and 1,1-difluoropentadecyl trifluoromethyl ketone, were inactive. Conversely, the saturated TFMKs n-dodecyl trifluoromethyl ketone and, particularly, n-hexadecyl trifluoromethyl ketone induced a synergistic effect when mixed with the synthetic pheromone in 10:1 ratio. However, in a wind tunnel these chemicals did not elicit any differential effect on flying moths attracted to a source containing a 10:1 blend of the analogue and the pheromone. In a dual choice bioassay with two dispensers, containing the pheromone alone, and mixtures of Z11-16:TFMK and the pheromone and separated 5 cm apart, males showed no particular preference for either dispenser. The ketone mixture, however, induced moths to execute erratic flights with frequent crosswind counter-turns and intersections with plume boundaries. The total number of contacts with the source were reduced when a control dispenser was paired with a dispenser containing Z11-16:TFMK and pheromone. Z11-16:TFMK and OTFP showed little toxicity on mice with a LD₅₀ of 1 g/kg after the 6th day of treatment. For comparitive purposes, the major component of the pheromone, Z11-16:Ac, displayed a LD₅₀ of 5 g/kg 6 days after application. Our results provide additional information about the activity of the TFMKs, which might be useful for the utilization of these chemicals in future pest control studies.     

Luster Pottery from the Thirteenth Century to the Sixteenth Century: A Nanostructured Thin Metallic Film

Luster is a decorative metallic film that was applied on the surface of medieval glazed pottery. It can be obtained via the low-temperature (∼650°C), controlled reduction of copper and silver compounds. In this paper, we show that luster is a thin layered film (200–500 nm thick) that contains metallic spherical nanocrystals dispersed in a silicon-rich matrix and has a metal-free outermost glassy layer that is 10–20 nm thick. Silver nanocrystals seem to be separated from those of copper, forming aggregates 5–100 μm in diameter. This composite structure exhibits optical properties that are dependent on both the particle size and the matrix. Luster is indeed the first reproducible nanostructured thin metallic film that was made by humans.     

Microstructural Evolution in Liquid-Phase-Sintered SiC: Part I, Effect of Starting Powder

The effect of starting SiC powder (β-SiC or α-SiC), with simultaneous additions of Al₂O₃ and Y₂O₃, on the microstructural evolution of liquid-phase-sintered (LPS) SiC has been studied. When using α-SiC starting powder, the resulting microstructures contain hexagonal platelike α-SiC grains with an average aspect ratio of 1.4. This anisotropic coarsening is consistent with interface energy anisotropy in α-SiC. When using β-SiC starting powder, the β→α phase transformation induces additional anisotropy in the coarsening of platelike SiC grains. A strong correlation between the extent of β→α phase transformation, as determined using quantitative XRD analysis, and the average grain aspect ratio is observed, with the maximum average aspect ratio reaching 3.8. Based on these observations and additional SEM and TEM characterizations of the microstructures, a model for the growth of these high-aspect-ratio SiC grains is proposed.     

Mechanical and thermal characterization of as-received recycled polyethylene filled with rice husk and their relationship to the end use of these composites

ABSTRACT

Waste can be considered a crisis across the world, especially in the Global South where landfills are collapsing and vector-borne illnesses are increasing. Due to the increase in the amount of waste plastic in the environment, different uses of recycled plastics are being investigated. One such use is roofing tiles. This has been put in place in Sri Lanka through the Waste for Life organization. Here, recycled polyethylene is filled with rice husk particles. Due to the hydrophilic nature of the rice husk, the strength of the polyethylene composites decreased with increasing rice husk filler. Since the roofing tiles do not need to support a large load, the loss in strength should not be too detrimental. However, the creep behavior was improved with 10% and 20% filler. This is important in that the temperature on the roof can reach high temperatures.     

Circulating Insulin-Like Growth Factor I is Involved in the Effect of High Fat Diet on Peripheral Amyloid β Clearance

Obesity is a risk factor for Alzheimer’s disease (AD), but underlying mechanisms are not clear. We analyzed peripheral clearance of amyloid β (Aβ) in overweight mice because its systemic elimination may impact brain Aβ load, a major landmark of AD pathology. We also analyzed whether circulating insulin-like growth factor I (IGF-I) intervenes in the effects of overweight as this growth factor modulates brain Aβ clearance and is increased in the serum of overweight mice. Overweight mice showed increased Aβ accumulation by the liver, the major site of elimination of systemic Aβ, but unaltered brain Aβ levels. We also found that Aβ accumulation by hepatocytes is stimulated by IGF-I, and that mice with low serum IGF-I levels show reduced liver Aβ accumulation—ameliorated by IGF-I administration, and unchanged brain Aβ levels. In the brain, IGF-I favored the association of its receptor (IGF-IR) with the Aβ precursor protein (APP), and at the same time, stimulated non-amyloidogenic processing of APP in astrocytes, as indicated by an increased sAPPα/sAPPβ ratio after IGF-I treatment. Since serum IGF-I enters into the brain in an activity-dependent manner, we analyzed in overweight mice the effect of brain activation by environmental enrichment (EE) on brain IGF-IR phosphorylation and its association to APP, as a readout of IGF-I activity. After EE, significantly reduced brain IGF-IR phosphorylation and APP/IGF-IR association were found in overweight mice as compared to lean controls. Collectively, these results indicate that a high-fat diet influences peripheral clearance of Aβ without affecting brain Aβ load. Increased serum IGF-I likely contributes to enhanced peripheral Aβ clearance in overweight mice, without affecting brain Aβ load probably because its brain entrance is reduced.     

Effect of the sintering additive content on the protective passive oxidation behaviour of pressureless liquid-phase-sintered SiC

The long-term oxidation behaviour in air of pressureless liquid-phase-sintered SiC was investigated as a function of the sintering-additive content (a mixture of Y₂O₃ and Al₂O₃ in the 3:5 molar ratio) at oxidizing temperatures in the interval 1100–1300 °C. It is shown that oxidation under these mild conditions is always passive, and with formation of protective oxide scales. However, the oxidation kinetics cannot be described appropriately by the parabolic-rate law. Instead, due to the gradual crystallization of the oxide scales during oxidation, it is more complex, exhibiting two different stretches given respectively by the arctan- and parabolic-rate laws. Furthermore, it was found that the rate-limiting mechanism of the initial arctan oxidation is the outward diffusion of metal cations from the secondary intergranular phase into the oxide scale, with the activation energy of the oxidation being very high and decreasing from 545 to 432 kJ/mol with increasing sintering-additive content from 5 to 20 wt%. The rate-limiting mechanism of the subsequent parabolic oxidation is however the inward diffusion of oxygen through the multicomponent oxide scale, with the activation energy being lower than before and also decreasing from 345 to 205 kJ/mol as the sintering-additive content increases from 5 to 20 wt%. It is also shown that the oxidation resistance decreases with increasing sintering-additive content, but that while the decrease is moderate up to 10 wt%, it is very marked for greater contents.     

C3S and C2S hydration in the presence of Na2CO3 and Na2SO4

This study analyses the behavior of calcium silicates C₃S and C₂S hydrated in two alkaline media, Na₂CO₃ and Na₂SO₄. The silicates were synthesized with laboratory reagents and hydrated in water, to which solid‐state alkaline activators with 4 wt% Na₂CO₃ or 4 wt% Na₂SO₄ were added. Two‐ and 28‐day mechanical strength values were determined and the reaction products were characterized with XRD, SEM/EDX, and ²⁹Si and ²³Na MAS NMR. The findings showed that the presence of Na₂CO₃ hastened hydration kinetics and stimulated early‐age mechanical strength development in both silicates. The most significant effect of sodium sulfate, however, was observed in the 28‐day material in both silicates, in which it raised strength by stimulating the precipitation of C–S–H gels with a high percentage of Q² units.