Temperamental resistance to control increases the association between sleep problems and externalizing behavior development.

This study examined the moderating effects of temperamental resistance to control on the link between development of sleep problems and development of externalizing behaviors over a 5-year period. Resistance to control was assessed with mothers' retrospective reports of temperament in infancy, provided when children were 5 years of age. Sleep problems were assessed with mother reports on an annual basis from age 5 to age 9. Externalizing behaviors were assessed with teacher reports on an annual basis from age 5 to age 9. A cross-domain latent growth curve model indicated that sleep problem trajectories were positively associated with externalizing behavior trajectories only for children high in resistance to control. In addition, resistance to control was positively associated with initial (age 5) sleep problems and initial (age 5) externalizing behaviors. The authors speculate that the development of sleep problems promotes the development of behavior problems for resistant children, whose self-regulatory abilities are especially tenuous. Implications for prevention and treatment of conduct problems are considered. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Molecular Origin of the Charge Carrier Mobility in Small Molecule Organic Semiconductors

Small‐molecule organic semiconductors are used in a wide spectrum of applications, ranging from organic light emitting diodes to organic photovoltaics. However, the low carrier mobility severely limits their potential, e.g., for large area devices. A number of factors determine mobility, such as molecular packing, electronic structure, dipole moment, and polarizability. Presently, quantitative ab initio models to assess the influence of these molecule‐dependent properties are lacking. Here, a multiscale model is presented, which provides an accurate prediction of experimental data over ten orders of magnitude in mobility, and allows for the decomposition of the carrier mobility into molecule‐specific quantities. Molecule‐specific quantitative measures are provided how two single molecule properties, the dependence of the orbital energy on conformation, and the dipole‐induced polarization determine mobility for hole‐transport materials. The availability of first‐principles based models to compute key performance characteristics of organic semiconductors may enable in silico screening of numerous chemical compounds for the development of highly efficient optoelectronic devices.     

Dynamics of photosynthetic pigments in an Andean lake in Colombia

Guatavita Lake is a small, sheltered tropical high mountain lake located in the Colombian Andes, with a closed watershed and a maximum depth of 25 m. It is the freshwater source for human consumption in nearby small towns, as well as being a site of cultural value for the country, as it was a sacred place to indigenous peoples until about five centuries ago. As the structure and function of this aquatic ecosystem is poorly understood, this study provides initial knowledge on its phytoplankton biomass dynamics, which should be useful in designing efficient management plans with environmental baseline information for similar lakes elsewhere. Physical and chemical data, and photosynthetic pigment concentrations, were measured for the period November 1999–November 2000 at the central vertical axis of Guatavita Lake. The vertical profile of the chlorophyll‐a concentration was closely related to the dissolved inorganic nitrogen concentrations and the thermal stratification characteristics. The maximum chlorophyll‐a concentration in the metalimnion was recorded for the thermal stratification period (November 1999–June 2000). Deepening of the maximum chlorophyll‐a concentration began in February, continuing to June, when it reached its lowest value at the 15 m depth. The phytoplankton biomass values showed an increment within the entire water column at the beginning of the mixing period (July). The relation between the metalimnetic peak of chlorophyll‐a and the dissolved inorganic nitrogen concentration suggests the growth of the phytoplankton community is limited mainly by the availability of nitrogen.     

Chemical composition,nutritive value and voluntary intake of tropical tree foliage and cocoyam in pigs

The composition of the leaves of cocoyam (Xanthosoma sagittifolium) and of two trees (Trichanthera gigantea and mulberry, Morus alba), their nutritive value in pigs and voluntary intake by pigs were determined. The average protein content ranged from 170 to 240 g kg^?1 dry matter (DM) and that of neutral detergent fibres from 218 to 398 g kg^?1 DM. The leaves are interesting sources of calcium (up to 69 g kg^?1 DM), potassium, iron and manganese. The proteins are well balanced in essential amino acids, with lysine ranging from 43 to 57 g kg^?1 proteins. The apparent faecal digestibility was determined by difference in 35 kg pigs fed a diet containing 35% leaf meal. The digestibility coefficients of DM, N and energy were, respectively, 47–57, 33–36 and 51–53%. The digestible energy value ranged from 1.674 to 2.037 kcal kg^?1 DM. The voluntary intake of Trichanthera and Xanthosoma was measured in sows weighing 100 kg on average. The intake reached 3.4 kg fresh leaves day^?1 (0.51 kg DM) and 1.0–1.1 kg dry leaf meal/day. It is concluded that low energy density is the main limiting factor of tree foliage for pig nutrition but that they are good sources of minerals and well‐balanced proteins. Copyright © 2005 Society of Chemical Industry     

In Vacuo Tribological Behavior of Polytetrafluoroethylene (PTFE) and Alumina Nanocomposites: The Importance of Water for Ultralow Wear

Polytetrafluoroethylene (PTFE) is widely regarded as an excellent candidate for solid lubrication in vacuum. However, it is often precluded from many practical applications due to its intrinsically high wear rate. Over the past decade, it has been discovered that small loading fractions of alumina nanofillers can increase the wear resistance of PTFE by three to four orders of magnitude. This dramatic increase in wear resistance has in turn prompted numerous tribological studies to examine the robustness of this performance. In this study, the wear and friction behavior of unfilled PTFE and PTFE and alumina nanocomposites were evaluated under a broad range of vacuum environments from 760 to 4 × 10^?6 Torr. The nanocomposites of PTFE/alumina showed a dramatic increase in wear of over two orders of magnitude at the highest vacuum conditions. There appears to be an optimal vacuum environment around 1–10 Torr, in which these samples achieved the lowest wear rates of approximately 2.5 × 10^?7 mm³/(Nm).     

A Universal Laser-Pulse Apparatus for Thermophysical Measurements in Refractory Materials at Very High Temperatures

This paper presents a new experimental technique enabling thermophysical measurements to be carried out at very high temperatures in a very simple and small pressurized vessel in which the sample is heated by a continuous wave laser, and subsequently subjected to a short temperature pulse. The adopted method is essentially an extension of the laser-flash technique, widely used for thermal diffusivity measurements, whereby, in addition, the heat capacity and, hence, the thermal conductivity, , are simultaneously evaluated from the pulse analysis. Results are presented for the thermal diffusivity and heat capacity of graphite, zirconia, and uranium dioxide up to temperatures above 3000 K.     

Bacterial Kinetics of Sulfur Oxidizing Bacteria and Their Biodeterioration Rates of Concrete Sewer Pipe Samples

The importance of bacteria in catalyzing microbially induced concrete corrosion was evaluated. Experiments were conducted to determine the optimum pH and growth kinetics of four selected bacterial strains (Thiobacillus neapolitanus C2, Thiobacillus thioparus H1, Acidithiobacillus thiooxidans, and Acidiphilium cryptum LHET2). Combinations of these strains were inoculated into flasks containing ～ 42?g concrete blocks half-submerged in 600 mL of synthetic wastewater with hydrogen sulfide in the headspace air. Controls not inoculated with bacteria lost 0–3 mg/g concrete over 227 days; in the aqueous phase the minimum pH was 6–6.7 and 19–23 mg of calcium/g concrete was released. Systems inoculated with two species of neutrophilic sulfur oxidizing microorganisms (SOM) lost 8 mg/g concrete; in the aqueous phase the minimum pH was 4.5 and 25 mg of calcium/g concrete was released. The concrete samples incubated with neutrophilic and acidophilic SOM and an acidophilic heterotroph experienced the greatest deterioration, with a total mass loss of 13 mg/g concrete, minimum aqueous pH of 3.0, 28 mg calcium/g concrete released, and 47 mg sulfate/g concrete produced.     

Enhanced biodegradation of iopromide and trimethoprim in nitrifying activated sludge

Iopromide (an X-ray contrast agent) and trimethoprim (an antibacterial drug) are frequently detected pharmaceuticals in effluents of wastewater treatment plants (WWTPs) and in surface waters due to their persistence and high usage. Laboratory-scale experiments showed that a significantly higher removal rate in nitrifying activated sludge as compared to conventional activated sludge was observed for both iopromide and trimethoprim. When the activity of the nitrifying bacteria was inhibited, the percent removal of iopromide decreased from 97 to 86% while trimethoprim removal decreased from 70 to 25%. The metabolite of iopromide identified when nitrification was not inhibited was a dehydroxylated iopromide at the two side chains. However, when the nitrifying bacteria were inhibited the metabolite identified was a carboxylate, formed during the oxidation of the primary alcohol on the side chain of iopromide. These results suggest that the nitrifying bacteria are important in the observed biodegradation of iopromide in the activated sludge with higher solid retention time (SRT). Results from the laboratory-scale study were corroborated by the observed removal efficiencies in a full-scale municipal WWTP, which showed that iopromide (ranging from 0.10 to 0.27 microg/L) and trimethoprim (ranging from 0.0.08 to 0.53 microg/L) were removed more effectively in the nitrifying activate sludge which has a higher SRT (49 days) than in the conventional activated sludge (SRT of 6 days). In nitrifying activated sludge, the percent removal of iopromide in the WWTP reached 61%, while in conventional activated sludge, average removal was negligible. For trimethoprim, removal was limited to about 1% in the conventional activated sludge, while in the nitrifying activated sludge, the removal was increased to 50%.     

Characterization of adsorption sites on aggregate soil samples using synchrotron X-ray computerized microtomography

Synchrotron-source X-ray computerized microtomography (CMT) was used to evaluate the adsorptive properties of aggregate soil samples. A linear relationship between measured mean mass attenuation coefficient (sigma) and mass fraction iron was generated by imaging mineral standards with known iron contents. On the basis of reported stoichiometries of the clay minerals and identifications of iron oxyhydroxides (1), we calculated the mass fraction iron and iron oxyhydroxide in the intergranular material. The mass fractions of iron were estimated to range from 0.17 to 0.22 for measurements made at 18 keV and from 0.18 to 0.21 for measurements made at 26 keV. One aggregate sample also contained regions within the intergranular material with mass fraction iron ranging from 0.29 to 0.31 and from 0.33 to 0.36 for the 18 and 26 keV measurements, respectively. The mass fraction iron oxyhydroxide ranged from 0.18 to 0.35 for the low-iron intergranular material and from 0.40 to 0.59 for the high-iron intergranular material. Using absorption edge difference imaging with CMT, we visualized cesium on the intergranular material, presumably because of adsorption and possible exchange reactions. By characterizing the mass fraction iron, the mass fraction iron oxyhydroxide, and the adsorptive capacity of these soil mineral aggregates, we provide information useful for conceptualization, development, and parametrization of transport models.     

Residues of different gel formulations on dentinal walls: A SEM/EDS analysis

The aim of this study was to evaluate the presence of residues of sodium hypochlorite gel, chlorhexidine gel, and EDTA gel on dentinal walls after canal preparation through chemical SEM‐ elemental chemical microanalysis (EDS) analysis. Forty‐eight single‐rooted teeth were selected. They had their crowns sectioned and were instrumented with a reciprocating system. The canals were irrigated with 5 mL of saline solution during root canal preparation. After instrumentation, the root canals were irrigated with 3 mL 17% EDTA followed by 1 min of ultrasonic passive activation (3× 20 sec) to remove the smear layer, and then irrigated with 3 mL of saline solution. The specimens were randomized into three groups (n = 12) according to the chemical substance that filled the root canal for 30 min: GI: 5.5% sodium hypochlorite gel; GII: 2% chlorhexidine gel; GIII: 24% EDTA gel; Negative control group: no substance was used. Then, the root canals were irrigated with 6 mL of saline solution followed by 1 min of ultrasonic passive activation (3× 20 sec). After ultrasonic activation, the canals were irrigated with 2 mL saline. The roots were sectioned, and the percentage of each chemical element present in the samples was analyzed through chemical SEM‐EDS microanalysis. All experimental groups showed a significantly higher percentage of chemical elements (Na and/or Cl) than the control group (P < 0.03). This in vitro study has shown that, regardless of chemical solutions used even after the final irrigation protocol, chemical residues of different substances remained attached to the root canal walls. Microsc. Res. Tech. 78:495–499, 2015. © 2015 Wiley Periodicals, Inc.