Synthesis,Characterization and Application of Sucrose Carboxylic Acid Polyesters — A Prototype of Non-Caloric or Surface Active Compounds

Sucrose carboxylic acid polyesters are in dependence of the degree of acylation and fatty acid composition more or less undigestible or emulsifying fat substitutes and functional additives for foods. In this connection the relationships between their molecular parameters and functional properties are discussed. New procedures of the solvent-free synthesis are presented. Furthermore, open biochemical and toxicological problems of pinocytosis and accumulation of intact polyesters in organs and tissue being still under investigations are considered.     

Upgrading of gas oils: the HDS kinetics of dibenzothiophene and its derivatives in real gas oil

The hydrodesulphurization (HDS) of dibenzothiophene (DBT), 4-methyl dibenzothiophene (4 M-DBT), 4,6-dimethyl dibenzothiophene (4,6 DM-DBT) and 4,6-diethyl dibenzothiophene (4,6 DE-DBT) as real gas oil components on NiMo/Al₂O₃ catalyst was investigated. On the basis of the first order rate constants of HDS of the individual sulphur compounds reactivities of the investigated compounds decreased in the order DBT ≫ 4 M-DBT > 4,6 DE-DBT ≈ 4,6 DM-DBT. Apparent activation energies of HDS of above sulphur compounds increased from 80.0 to 120.5 kJ/mol.     

Electrodeposition and dissolution of yttrium-hexacyanoferrate layers

The electrodeposition and dissolution of yttrium-hexacyanoferrate [YHCNFe(II)] were investigated by electrochemical quartz crystal microbalance technique (EQCM). The electrodeposition was carried out by potential cycling or stepping from solutions of Y(NO₃)₃ and K₃[Fe^III(CN)₆] of different concentrations. The ratio of the reactants was also varied. No deposition was found in dilute solutions (c < 10⁻³ mol dm⁻³). The increase of concentrations led to an intense deposition of YHCNFe(II) in the course of reduction of [Fe^III(CN)₆]³⁻. At high concentrations of the reactants a coagulation deposition of YHCNFe(III) at open-circuit has also been detected. During the reduction the first phase is the nucleation which requires saturation or oversaturation in respect to the reacting species near the gold surface. The growth phase is much faster than the formation of nuclei, and its rate depends on the concentration and the concentration ratio of the species. The composition of the deposits has been determined by total reflection X-ray fluorescence (TXRF) spectrometry. From the molar ratio of atomic constituents (K, Y and Fe) of the slightly soluble deposit (solubility: 5 × 10⁻⁵ mol dm⁻³) formed after reduction of Fe(III) a formula K_0.46Y_1.18[Fe^II(CN)₆] can be derived. This value is in good accordance with the molar mass calculated from the results of EQCM experiments which also revealed that the deposit contains ca. 2 mol H₂O/mol YHCNFe(II). The solubility of YHCNFe(III) is substantially higher (s = 2 × 10⁻³ mol dm⁻³), and according to the results of TXRF measurements, its composition is Y[Fe^III(CN)₆]. The reoxidation of YHCNFe(II) takes place in two steps. The first one is a partial oxidation which is accompanied by the desorption of K⁺ ions from the layer. During further oxidation a fast dissolution occurs due to the high solubility of YHCNFe(III).     

Knowledge transfer in IT offshoring relationships: the roles of social capital,efficacy and outcome expectations

Information technology (IT) development in global organisations relies heavily on the transfer of tacit and complex knowledge from onshore units to offshore subsidiaries. A central concern of such organisations is the development of social capital, which is known to facilitate the smooth transfer of knowledge. However, only a few studies in IS research have explicitly examined the role of social capital for knowledge transfer in an IT offshoring context. In this paper, we argue that such knowledge transfer mechanisms can be understood better by considering social capital in concert with knowledge senders' efficacy and outcome expectations, two of the potentially key motivational drivers of knowledge transfer. We develop our arguments through a qualitative case study of a large German multinational company. German IT developers in this firm provided in‐depth accounts of their experience with offshore colleagues in an Indian captive subsidiary unit. Drawing on our analysis, we develop a model that depicts the influence of social capital, efficacy and outcome expectations on onshore IT developers' ability and willingness to transfer knowledge to offshore colleagues. Through the model, we also explain how social capital, efficacy and outcome expectations are interrelated and generate three interlocked, self‐reinforcing circles of knowledge transfer success in IT offshoring relationships.     

Zum Verbesserungspotenzial schriftlicher Aufklärungsmaterialien zu (bio)medizinischen Forschungsvorhaben – Empirische Analyse von Antragsunterlagen einer Forschungsethikkommission

Background

One of the elementary prerequisites for medical research on and with humans is the patients’ or probands’ informed consent. To ensure informed consent, study participants must be—among other things—provided with high-quality information. We developed criteria to assess and evaluate the quality of various written patient information material.

Methods

Based on a catalogue addressing 117 single criteria, we assessed the quality of 128 randomly selected documents from study proposals submitted to the ethical committee of Luebeck University in 2006. Each criterion refers to one of six quality areas (such as “readability and comprehensibility” or “potential benefit and harm”).

Results

The documents on average satisfied half of the criteria with a range from 20–76% for single items. The area with the highest quality score was “consent form” (64%), while “potential benefit and harm” (35%) was the lowest. Material from drug trials showed a significantly higher quality than that from other study types. Only 21 out of 117 criteria were met in more than 80% of all relevant documents.

Conclusion

The study provides evidence for significant deficits in the information material from basic and clinical research projects presented to one academic research ethics committee. Researchers need support in developing and writing informed consent documents. Our set of criteria could be used to make them more sensitive to the various demands involved.     

SDS electrophoresis of legume seed proteins in horizontal ultrathin-layer pore gradient gels

Summary Horizontal SDS electrophoresis of 18 legume seed protein extracts was performed in ultrathin-layer polyacrylamide gels on foil supports. Separation results of the SD S pore gradient electrophoresis (T=4–22.5%) are compared to those of SDS electrophoresis in a constant pore size gel (T=10%). Resolution as well as the sensitivity (0.1 g protein per band) of the ultrathin-layer SDS pore-gradient electrophoresis were extremely high. Because of the very low gel thickness, separation, staining and drying were completed in substantially shorter times than achieved with conventional thick gels. An easy technique for casting ultrathin-layer (360 gm) concave gradient gels for 10 cm separation distance and a width of 25 cm is described. The even distribution of the concave exponential pore-gradient over the whole gel width is demonstrated. Molecular weights of the legume proteins are detected from 5,000 to 110,000 daltons. The protein patterns are genus- and species-specific.

---

Horizontale Ultradünnschicht SDS-Gradientengel-Elektrophorese von Leguminosensamenproteinen

Zusammenfassung Die ausgezeichnete Trennschärfe der horizontalen Ultradünnschicht-SDS-Gradienten-gel Elektrophorese wird am Beispiel von Samenproteinen 18 verschiedener Leguminosengattungen, -arten und -sorten gezeigt. Es werden die Trennergebnisse der SDS-Elektrophorese mit Gelgradienten (T=4-22,5%) bzw. mit Gelen konstanter Porengröße (T=10%) verglichen. Das höchste Auslösungsvermögen und die beste Trennschärfe zeigen ultradünne Gradientengele. Die Nachweisempfindlichkeit ist bei allen Ultradünn-schicht-SDS-Elektrophoresen sehr hoch (0,1 g Protein/Bande). Da die auf Folie polymerisierten Gele sehr dünn sind (360 m) kann mit wesentlich verkürzten Trenn-, Färbe-, Entfärbe- und Trocknungszeiten gear-beitet werden. Es wird eine einfache Herstellung ultradünner Polyacrylamidgele mit exponentiellen konkaven Gradienten für die Trenndistanz von 10 cm mit einer Breite von 25 cm beschrieben. Die gerade und gleichmäßige Verteilung des Gradienten über die gesamte Gelbreite wird gezeigt. Mit der beschriebenen Methode werden bei den untersuchten Leguminosen-proteinen Molekulargewichte von 5 000 his 110 000 Dalton gefunden. Die Proteinmuster erweisen sich als gattungs- und artspezifisch.

     

Recombinant antibody fragments that detect enoyl acyl carrier protein reductase in Brassica napus

Purified Brassica napus enoyl acyl carrier protein reductase (ENR) was used to select specific antibodies from a library of antibody fragments, single-chain F_v (scF_v), displayed on filamentous phage. Analysis of the selected clones by BstNl fingerprinting and nucleotide sequencing showed that the scF_v were derived from three different human V_H germline genes. The binding specificities were confirmed by Western blots and ELISA. The scF_v preparations reacted with B. napus ENR, but not with β-keto reductase, nor enoyl reductase from Escherichia coli. Analysis of fragments generated by CNBr treatment indicates that the scF_v 3.13 recognizes an epitope located within the n-terminal 80 amino acids of the enzyme molecule. The scF_v were used to detect ENR directly in extracts of B. napus seeds.     

Tuning Molecular Self‐Assembly on Bulk Insulator Surfaces by Anchoring of the Organic Building Blocks

Molecular self‐assembly constitutes a versatile strategy for creating functional structures on surfaces. Tuning the subtle balance between intermolecular and molecule‐surface interactions allows structure formation to be tailored at the single‐molecule level. While metal surfaces usually exhibit interaction strengths in an energy range that favors molecular self‐assembly, dielectric surfaces having low surface energies often lack sufficient interactions with adsorbed molecules. As a consequence, application‐relevant, bulk insulating materials pose significant challenges when considering them as supporting substrates for molecular self‐assembly. Here, the current status of molecular self‐assembly on surfaces of wide‐bandgap dielectric crystals, investigated under ultrahigh vacuum conditions at room temperature, is reviewed. To address the major issues currently limiting the applicability of molecular self‐assembly principles in the case of dielectric surfaces, a systematic discussion of general strategies is provided for anchoring organic molecules to bulk insulating materials.