Thick-boundary-film formation by friction modifier additives

The addition of friction modifiers to lubricants has been the subject of study for a number of years. Two main models have emerged, a thick-film and a thin-film or monolayer model, but it is uncertain which materials and conditions produce which results. The present work, therefore, looked at whether certain additives form thin or thick films in rolling and/or rolling-sliding contacts; the practical effect of any thick-film formation behaviour; and the nature and structure of boundary films formed. Using ultrathin-film interferometry, tests were performed on a rig, with two commercial friction modifiers, a copper carboxylate soap, and a dimerised unsaturated carboxylic acid, in hexadecane and in a solvent-refined mineral oil. The results showed that both additives formed thick films in high-pressure rolling and sliding contacts at slow speeds. However, the nature of the films is determined by temperature and speed, and under certain conditions they can be destroyed.     

Scalable general high voltage MOSFET model including quasi-saturation and self-heating effects

In this work, we present for the first time, a highly scalable general high voltage MOSFET model, which can be used for any high voltage MOSFET with extended drift region. This model includes physical effects like the quasi-saturation, impact-ionization and self-heating, and a new general model for drift resistance. The model is validated on the measured characteristics of two widely used high voltage devices in the industry i.e. LDMOS and VDMOS devices, and implemented on commercial circuit simulators like SABER (Synopsys), ELDO (Mentor Graphics), Spectre (Cadence) and UltraSim (Cadence). The accuracy of the model is better than 10% for DC I–V and g–V characteristics and shows good behavior for all capacitances which are unique for these devices showing peaks and shift of peaks with bias variation. The model also exhibits excellent scalability with transistor width, drift length, number of fingers and temperature.     

Piezoelectric BNT-BT<Subscript>0.11</Subscript> thin films processed by sol–gel technique

0.89(Na_0.5Bi_0.5)TiO₃–0.11BaTiO₃, (BNT-BT_0.11) thin film was fabricated by sol–gel/spin coating process, on platinized silicon wafer. Perovskite structure with random orientation of crystallites has been obtained at 700 °C. Piezoelectric activity of BNT-BT_0.11 thin film was detected using piezoresponse force microscopy (PFM). Effective piezoelectric coefficient d _33eff of such film, recorded at 5 V applied dc voltage, was ~29 pm/V, which is similar to other BNT-BT _x thin films. The complex refractive index and dielectric function of BNT-BT_0.11 thin films were also investigated. The high leakage current density significantly influences the dielectric, ferroelectric, and piezoelectric properties of the BNT-BT_0.11 films.     

Common Molecular Targets of a Quinolone Based Bumped Kinase Inhibitor in Neospora caninum and Danio rerio

Neospora caninum is an apicomplexan parasite closely related to Toxoplasma gondii, and causes abortions, stillbirths and/or fetal malformations in livestock. Target-based drug development has led to the synthesis of calcium-dependent protein kinase 1 inhibitors, collectively named bumped kinase inhibitors (BKIs). Previous studies have shown that several BKIs have excellent efficacy against neosporosis in vitro and in vivo. However, several members of this class of compounds impair fertility in pregnant mouse models and cause embryonic malformation in a zebrafish (Danio rerio) model. Similar to the first-generation antiprotozoal drug quinine, some BKIs have a quinoline core structure. To identify common targets in both organisms, we performed differential affinity chromatography with cell-free extracts from N. caninum tachyzoites and D. rerio embryos using the 5-aminopyrazole-4-carboxamide (AC) compound BKI-1748 and quinine columns coupled to epoxy-activated sepharose followed by mass spectrometry. BKI-binding proteins of interest were identified in eluates from columns coupled to BKI-1748, or in eluates from BKI-1748 as well as quinine columns. In N. caninum, 12 proteins were bound specifically to BKI-1748 alone, and 105 proteins, including NcCDPK1, were bound to both BKI-1748 and quinine. For D. rerio, the corresponding numbers were 13 and 98 binding proteins, respectively. In both organisms, a majority of BKI-1748 binding proteins was involved in RNA binding and modification, in particular, splicing. Moreover, both datasets contained proteins involved in DNA binding or modification and key steps of intermediate metabolism. These results suggest that BKI-1748 interacts with not only specific targets in apicomplexans, such as CDPK1, but also with targets in other eukaryotes, which are involved in common, essential pathways.     

Asymmetric transistor sizing targeting radiation-hardened circuits

This article proposes a technique to improve the dependability of circuits under energetic particle irradiation by resizing transistors in the most critical paths. First, the SET vulnerability of a mapped circuit is analyzed to identify the most sensitive nodes. The sensitivity of the circuit is defined by the logical and electrical masking. Once the most critical nodes are selected, a transistor sizing algorithm is able to resize the pull-up and pull-down transistors separately. The asymmetric resizing offers interesting area and performance trade-off in comparison with gate sizing and gate duplication techniques. Results show very small area and performance penalties for circuits operating at ground level for a 130-nm technology process.     

Biohybrid Nanostructured Iron Oxide Nanoparticles and Satureja hortensis to Prevent Fungal Biofilm Development

Cutaneous wounds are often superinfected during the healing process and this leads to prolonged convalescence and discomfort. Usage of suitable wound dressings is very important for an appropriate wound care leading to a correct healing. The aim of this study was to demonstrate the influence of a nano-coated wound dressing (WD) on Candida albicans colonization rate and biofilm formation. The modified WD was achieved by submerging the dressing pieces into a nanofluid composed of functionalized magnetite nanoparticles and Satureja hortensis (SO) essential oil (EO). Chemical composition of the EO was established by GC-MS. The fabricated nanostructure was characterized by X-ray Diffraction (XRD), Transmission Electron Microscopy (TEM), Differential Thermal Analysis (DTA) and Fourier Transform-Infrared Spectroscopy (FT-IR). The analysis of the colonized surfaces using (Scanning Electron Microscopy) SEM revealed that C. albicans adherence and subsequent biofilm development are strongly inhibited on the surface of wound dressing fibers coated with the obtained nanofluid, comparing with regular uncoated materials. The results were also confirmed by the assay of the viable fungal cells embedded in the biofilm. Our data demonstrate that the obtained phytonanocoating improve the resistance of wound dressing surface to C. albicans colonization, which is often an etiological cause of local infections, impairing the appropriate wound healing.     

Creating a low-cost, ultra-clean environment

This paper describes a way to create a cleanroom environment with a limited budget, which may be useful to organizations requiring small amounts of very high quality surface processing. After a brief review of some general principles, it discusses the design, including practical constraints, and installation of a small facility in the University of Warwick. Based around standard bought-in items, it achieves cleanroom Class 10 000 (ISO Class 7) with local enclosures of better than Class 10 (ISO Class 4) air quality.     

Preoccupations for wind energy conversion

The paper refers to the concerns that have existed ever since 1982 in the Institute of Scientific Research and Technological Engineering for Power Equipment (ICSITEE)-Bucharest to utilize power units to convert wind energy into electric power (WEU).

The paper describes test patterns and industrial pilots for WEU of 10, 30, 50 and 300 kW achieved by the Center of Scientific Research and Technological Engineering for Hydropower Equipment (CCSITEH) Re i a-Timi oara Division.     

Fault-tolerant adaptive routing under an unconstrained set of node and link failures for many-core systems-on-chip

An online fault tolerant routing algorithm for 2D mesh Networks-on-Chip is presented in this work. It combines an adaptive routing algorithm with neighbor fault-awareness and a new traffic-balancing metric. To be able to cope with runtime permanent and temporary failures that may result in message corruption, message loss or deadlocks, the routing algorithm is enhanced with packet retransmission and a new message recovery scheme.     

Measurement of the Rheology of Lubricant Films Within Elastohydrodynamic Contacts

There is growing need for a reliable model of the rheological response of lubricants in elastohydrodynamic (EHD) contacts, not only to predict behaviour in full-film EHD conditions, but also for use in modelling mixed-film lubrication. One barrier to developing such a model is that measurements of friction actually represent averaged values over the whole, lubricated contact under study. However the fluid film conditions of temperature, pressure and strain rate generally vary over such contacts, which makes it difficult to determine constitutive shear-stress equations from friction measurements. This paper examines the various different techniques used to study the origins of EHD friction and the underlying film rheology. It then describes and applies a technique for obtaining the temperature rise maps of both solid surfaces in a rolling-sliding EHD contacts and thus shear-stress and friction maps. The work shows that the shear stress of the traction fluid studied increases approximately linearly with pressure and decreases approximately linearly with temperature in the high-pressure central region of EHD contacts.