Modification of mechanical properties of Kevlar fibre by polymer infiltration

While high-performance organic fibres such as poly (para phenylene benzobisthiazole) and Kevlar possess excellent mechanical properties under axial tension, their strength under compression is generally poor. This study focuses on a polymer infiltration approach to modify the mechanical properties of the Kevlar 49 fibre in tension as well as compression, in which various polymeric resins are infiltrated in an opened fibrillar network of Kevlar single filaments. Opening was achieved using concentrated sulfuric acid, which resulted in a strength loss at high acid concentrations. However, compared to the acid-treated fibre, both the tensile strength and strain-to-failure of the fibres were found to increase after infiltration with epoxy resins and bismaleimide polymers. Polymer infiltration also resulted in a significant improvement in the compressive strength of the Kevlar fibre, with the bismaleimide performing better than the epoxy resins. Plasma modification using ammonia was also used to enhance interfibrillar adhesion by incorporating reactive amine groups on the fibril surface     

An inverse solution methodology for estimating the diffusion coefficient of gases in Athabasca bitumen from pressure-decay data

An inverse solution methodology is developed for the estimation of diffusion coefficient of gases in highly viscous, oil-sands bitumens from isothermal, pressure-decay measurements. The approach involves modeling the rate of change in pressure using the diffusion equation for the liquid phase coupled with a mass balance equation for the gas phase. The inverse solution framework is utilized to arrive at two graphical techniques for estimating the diffusion coefficient. Both techniques involve the determination of the slope of a straight line resulting from plotting the experimental data in accordance with the developed model. An advantage of the proposed techniques is that the diffusion coefficient is estimated directly, i.e. without making it an adjustable parameter. The novelty of the proposed method is in its simplicity as well as its ability to isolate portions of the pressure-decay data affected by experimental fluctuations. The effect of the initial pressure on the predicted diffusion coefficient and pressure-decay profile was also investigated. The diffusion coefficients of CO₂, CH₄, C₂H₆ and N₂ in Athabasca bitumen at 50–90 °C and about 8 MPa were estimated and compared with literature values.     

A Dynamic Dictionary for Priced Information with Application

In this paper we design a dynamic dictionary for the priced information model initiated by Charikar et al. Assume that a set S consisting of n elements is given such that each element has an associated price, a positive real number. The cost of performing an operation on elements of S is a function of their prices. The cost of an algorithm is the sum of the costs of all operations it performs. The objective is to design algorithms which incur low cost. In this model we propose a dynamic dictionary, supporting search, insert and delete, for keys drawn from a linearly ordered set. As an application we show that the dictionary can be used in computing the trapezoidal map of a set of line segments, a fundamental problem in computational geometry.     

Thermoplastic elastomeric composition based on maleic anhydride–grafted ground rubber tire

Ground rubber tire (GRT) powder was maleated in an internal mixer using maleic anhydride and dicumyl peroxide at 160°C. Maleated GRT was characterized by using X‐ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, wettability, and differential scanning calorimetry. The physical properties of the dynamically vulcanized 60 : 40, rubber : plastic composition based on acrylated high‐density polyethylene as the plastic phase and ethylene propylene diene rubber containing maleated GRT as the rubber phase were found to be greater than the corresponding composition containing nonmaleated GRT. The blend was found to be reprocessable, like themoplastic elastomers. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 370–378, 2002; DOI 10.1002/app.10348     

Digital television: a perspective

Commercial television was standardized originally mainly for entertainment, sports, and news, using over-the-air broadcasts. While a few upward compatible changes have been added over the years, the standard has remained essentially unchanged. Moreover, no other standard has had so many products and services built around it and withstood such a period of rapid technological change. Digital television promises to disturb the current equilibrium in consumer television and in the broader media industries. It is forcing a convergence with the simultaneous expansion of personal computing into the home and the commercialization of research networks. Digitizing television in a cost-effective manner and integrating it with computers, telecommunication networks, and consumer products will produce a large array of new products and services. The paper describes digital television, factors affecting it, its potential, and some major issues in its evolution     

A simple correlation for estimating viscosities of solutions of salts in aqueous,non-aqueous and mixed solvents applicable to high concentration,temperature and pressure

A new correlation is proposed to correlate the viscosities of salt solutions in aqueous, non-aqueous solvents and their mixtures. The correlation involves two parameters i.e. solvation number and ion-solvent interaction coefficient, which are well-documented quantities in the literature. The proposed correlation has been examined on the experimental viscosity data of salt solutions in aqueous, non-aqueous and their mixtures up to 473 K and 31 MPa pressure. The salts with various ionic charges were employed for testing the proposed correlation. Several non-aqueous solvents like dimethyl sulphoxide, alcohols and formamide were included for the data regression. The viscosities of these solutions can be correlated to within 0.7%.     

Studies on miscibility of blends of ethylene methyl acrylate and polydimethyl siloxane rubber

Blends of ethylene methyl acrylate (EMA) and poly(dimethylsiloxane) rubber (PDMS) are demonstrated to be miscible. The miscibility results in a single and composition-dependent glass transition temperature. IR spectra of the blends provide direct evidence of chemical reaction between EMA and PDMS rubber.