Switching to Directional Antennas with Constant Increase in Radius and Hop Distance

For any angle α<2π, we show that any connected communication graph that is induced by a set P of n transceivers using omni-directional antennas of radius 1, can be replaced by a strongly connected communication graph, in which each transceiver in P is equipped with a directional antenna of angle α and radius r _dir, for some constant r _dir=r _dir(α). Moreover, the new communication graph is a c-spanner of the original graph, for some constant c=c(α), with respect to number of hops.     

Prediction of properties of rubber by using artificial neural networks

Different rubber formulations were designed using nitrile rubber and a mixed crosslinking system consisting of sulfur/accelerator and electron beam radiation. Based on the experimental results, an artificial neural network (ANN) was constructed to simulate the mechanical properties and volume fraction of rubber. The ANN could predict accurately the above properties for a series of nitrile rubber compounds. However, the number of training data played a key role in the ANN predictive quality. In addition, the more complex the nonlinear relation between input and output was, the larger was the number of training dataset required. The predicted results were further validated using another mathematical model. The constructed ANN was verified with a completely different styrene butadiene rubber system. The prediction was found to be extremely good. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 2227–2237, 2006     

Rubber–clay nanocomposite by solution blending

Ethylene vinyl acetate rubber (45% vinyl acetate content, EVA‐45) and organomodified clay (12Me‐MMT) composites were prepared by solution blending of the rubber and the clay. A combination of X‐ray diffraction, scanning electron microscopy, and transmission electron microscopy studies showed that the composites obtained are on the nanometer scale. The measurements of the dynamic mechanical properties for different compositions over a temperature range (?100 to +100°C) showed that the storage moduli of these rubber–clay nanocomposites are higher above the glass to rubber transition temperature compared to the neat rubber. The tensile strength of the nanocomposites is about 1.6 times higher than that of the EVA‐45. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 87: 2216–2220, 2003     

Gas hold-up in non-newtonian solutions in a bubble column with internals

Bubble characteristics and gas hold-up were studied in a two phase (air-aqueous CMC solution) bubble column provided with helical coils and straight tubes as internals. The effects of superficial gas velocity, rheological properties, and volume fraction covered by the internals, on gas hold-up were studied. Hold-up values determined directly and by simultaneous pressure drop measurements matched well. Enhancement of gas hold-up values up to 55 per cent was achieved in systems using internals. The gas hold-up results were also compared with the values obtained from correlations reported in the literature.     

High-Thermal-Conductivity Aluminum Nitride Ceramics: The Effect of Thermodynamic, Kinetic, and Microstructural Factors

Improvement in the thermal conductivity of aluminum nitride (AlN) can be realized by additives that have a high thermodynamic affinity toward alumina (Al₂O₃), as is clearly demonstrated in the aluminum nitride-yttria (AlN-Y₂O₃) system. A wide variety of lanthanide dopants are compared at equimolar lanthanide oxide:alumina (Ln₂O₃: Al₂O₃, where Ln is a lanthanide element) ratios, with samaria (Sm₂O₃) and lutetia (Lu₂O₃) being the dopants that give the highest- and lowest-thermal-conductivity AlN composites, respectively. The choice of the sintering aid and the dopant level is much more important than the microstructure that evolves during sintering. A contiguous AlN phase provides rapid heat conduction paths, even at short sintering times. AlN contiguity decreases slightly as the annealing times increase in the range of 1–1000 min at 1850°C. However, a substantial increase in thermal conductivity results, because of purification of AlN grains by dissolution-reprecipitation and bulk diffusion. Removal of grain-boundary phases, with a concurrent increase in AlN contiguity, occurs at high annealing temperatures or at long times and is a natural consequence of high dihedral angles (poor wetting) in liquidphase-sintered AlN ceramics.     

Compositional trend analysis on poly(phenylene ether) based thermoplastic elastomers

Detailed statistical trend analysis of thermoplastic elastomers based on poly (phenylene ether) (PPE), polystyrene (PS), ethylene vinyl acetate (EVA) and styrene‐ethylene‐butylene‐styrene (SEBS) was done through Design Expert software by Stat‐Ease. D optimal crossed design was followed to capture the interaction with the parameters. Effect of blend ratio, vinyl acetate (VA) content of EVA, molecular weight (MW) of SEBS and intrinsic viscosity (IV) of PPE on the blend performance (response) was studied in detail. Design of Experiment (DOE) analysis showed the “optimized formulation” of the blend. Increase in PPE‐polystyrene (PS) content increased tensile strength and modulus of the blend, followed by a decrease in strain at break. However, EVA had a reverse effect on tensile strength and modulus. Strain at break increased significantly with increasing SEBS content in the blend. Graphical and numerical optimization showed that superior mechanical properties (tensile strength, strain at break and modulus) could be achieved at VA content ～ 50% at a particular loading of EVA. Low MW SEBS was found to be more compatible with the other components of the blend. Mechanical properties of the quaternary blend were marginally affected with change in IV of PPE in the range of 0.33 to 0.46. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Preparation and characterization of low-halogen and nonhalgoen fire-resistant low-smoke (FRLS) cable sheathing compound from blends of functionalized polyolefins and PVC

An attempt is made to develop a novel series of cable sheathing compounds with variation in chlorine content and sufficient fire retardance and unique low-smoke characteristics. These are prepared by blending PVC and functionalized polyolefins in different compositions. PE and EPDM have been functionalized by grafting dibutyl maleate (DBM) using DCP as initiator. FRLS compounds made from PVC-functionalized polyolefin blends possess the special characteristics of low-smoke, low-acid-gas generation, increased fire retardance, and improved volume resistivity, which are much better in comparison with a typical PVC sheathing compound. Thermoplastic elastomer (TPE) based nonhalogen FRLS compounds are also reported. The mechanisms for grafting, polymer-polymer and polymer-filler interactions have been presented.     

Algorithm for computation of molecular weight distribution and its moments in reversible step-growth polymerization in batch reactors

The differential equations governing the molecular weight distribution (MWD) in step-growth polymerization are coupled and nonlinear and a large number of them must be solved simultaneously to keep the truncation error low. In this work, these equations have been decoupled so that they can be solved sequentially. The solution of these is independent of the truncation error and there is considerable saving of computation time. To demonstrate the efficiency of the algorithm, the formation of polyethylene terephthalate (PET) in batch reactors with ethylene glycol evaporating has been analyzed. The feed to the reactor is taken as polymer with its oligomers present according to the Flory's distribution. The effect of pressure and temperature of the reactor on the progress of polymerization has been modelled and evaluated. The amount of ethylene glycol distilled, the concentrations of the first five oligomers Q₁ to Q₅, the number average chain length, and the polydispersity index of the polymer have been determined. It is shown that the reduced pressure and increased temperature reduce the concentration of the condensation product in the reaction mass, thus pushing the polymerization in the forward direction. Lastly the CPU time on Dec 1090 using this algorithm is only 0.40 s compared to about 10 min for similar computations using other existing methods.     

Influence of ZnO nanoparticles on the cure characteristics and mechanical properties of carboxylated nitrile rubber

Zinc oxide (ZnO) nanoparticles assembled in one dimension to give rod‐shaped morphology were synthesized. The effect of these ZnO nanoparticles (average particle size ～ 50 nm) as the curing agent for carboxylated nitrile rubber was studied with special attention to cure characteristics, mechanical properties, dynamic mechanical properties, and swelling. These results were compared with those of the conventional rubber grade ZnO. The study confirmed that the ZnO nanoparticles gave a better state of cure and higher maximum torque with a marginal decrease in optimum cure time and scorch time. The mechanical properties also showed an improvement. There was an increase in tensile strength by ～ 120%, elongation at break by ～ 20%, and modulus at 300% elongation by ～ 30% for the vulcanizate cured with ZnO nanoparticles, as compared with the one containing rubber grade ZnO. Dynamic mechanical analysis revealed that the vulcanizates exhibited two transitions—one occurring at lower temperature due to the T_g of the polymer, while the second at higher temperature corresponding to the hard phase arising due to the ionic structures. The second transition showed a peak broadening because of an increase in the points of interaction of ZnO nanoparticles with the matrix. The tan δ peak showed a shift towards higher T_g in the case of ZnO nanoparticle‐cured vulcanizate, indicating higher crosslinking density. This was further confirmed by volume fraction of rubber in the swollen gel and infrared spectroscopic studies. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Nighttime face recognition at large standoff: Cross-distance and cross-spectral matching

Face recognition in surveillance systems is important for security applications, especially in nighttime scenarios when the subject is far away from the camera. However, due to the face image quality degradation caused by large camera standoff and low illuminance, nighttime face recognition at large standoff is challenging. In this paper, we report a system that is capable of collecting face images at large standoff in both daytime and nighttime, and present an augmented heterogeneous face recognition (AHFR) approach for cross-distance (e.g., 150 m probe vs. 1 m gallery) and cross-spectral (near-infrared probe vs. visible light gallery) face matching. We recover high-quality face images from degraded probe images by proposing an image restoration method based on Locally Linear Embedding (LLE). The restored face images are matched to the gallery by using a heterogeneous face matcher. Experimental results show that the proposed AHFR approach significantly outperforms the state-of-the-art methods for cross-spectral and cross-distance face matching.