Two-mode Gaussian product states in a lossy interferometer

The quantum Fisher information for a two-mode, Gaussian product state in an interferometer subject to photon loss is studied. We obtain the quantum Cramer–Rao bound on the achievable precision in phase estimation using such states. The scaling of the measurement precision with the mean photon number is compared to the shot noise-limited scaling for dual squeezed vacuum states and dual squeezed, displaced vacuum states.     

Blast Fragility and Sensitivity Analyses of Steel Moment Frames with Plan Irregularities

Fragility functions are determined for braced steel moment frames (SMFs) with plans such as square-, T-, L-, U-, trapezoidal-, and semicircular-shaped, subjected to blast. The frames are designed for gravity and seismic loads, but not necessarily for the blast loads. The blast load is computed for a wide range of scenarios involving different parameters, viz. charge weight, standoff distance, and blast location relative to plan of the structure followed by nonlinear dynamic analysis of the frames. The members failing in rotation lead to partial collapse due to plastic mechanism formation. The probabilities of partial collapse of the SMFs, with and without bracing system, due to the blast loading are computed to plot fragility curves. The charge weight and standoff distance are taken as Gaussian random input variables. The extent of propagation of the uncertainties in the input parameters onto the response quantities and fragility of the SMFs is assessed by computing Sobol sensitivity indices. The probabilistic analysis is conducted using Monte Carlo simulations. The frames have least failure probability for blasts occurring in front of their corners or convex face. Further, the unbraced frames are observed to have higher fragility as compared to counterpart braced frames for far-off detonations.     

Self‐employment and local economic performance: Evidence from US counties*

This study explores the relationship between self‐employment and income growth, employment growth, and change in poverty in metro and non‐metro areas in the United States using county‐level panel data. We investigate the impact of the relative size of the self‐employment sector measured by the share of non‐farm proprietorships (NFPs) in total full and part‐time employment on three key economic performance indicators. We first estimate an income growth model to analyse the effects of self‐employment on income growth. Then we investigate the independent effects of self‐employment on employment growth and changes in family poverty rates. Our results indicate that higher self‐employment rates are associated with statistically significant increases over time in income and employment growth, and reductions in poverty rates in non‐metro counties. We find similar effects on metro county income and employment, but not on poverty dynamics.     

Poly(3-hexylthiophene) and hexafluoro-2-propanol-substituted polysiloxane based OFETs as a sensor for explosive vapor detection

The organic field effect transistors (OFETs) with regioregular poly 3-hexylthiophene (rr-P3HT) and hexafluoro-2-propanol-substituted polysiloxane (SXFA) as an organic layer, have been used for detection of explosive vapors with excellent sensitivity of less than 70 ppt for 1,3,5-trinitro-1,3,5-triazacyclohexane (RDX) and less than 100 ppt for 2,4,6-trinitrotoluene (TNT). The sensor response (% change in saturation current) was found to be 125 ± 10% for TNT and 90 ± 10% for RDX. It was also observed that the incorporation of Cu^II tetraphenylporphyrin (CuTPP) into rr-P3HT/SXFA matrix resulted in an improved selectivity for the vapors of nitro based analytes (TNT, RDX and DNB) as compared to the vapors of non explosive oxidizing agents such as nitrobenzene (NB), benzoquinone (BQ) and benzophenone (BP). This is attributed to the increased binding of the vapors containing nitro compound to the thin films due to the presence of CuTTP. Spin coated thin films were further characterized by Atomic Force Microscopy (AFM) and Electrostatic Force Microscopy (EFM).     

Effect of Retrogression and Re-Aging on Tensile Mechanical Properties in Transverse Direction of Extruded Rods from Aluminum Alloy AA7049

Metal Science and Heat Treatment - The effect retrogression and re-aging (RRA treatment) on the tensile properties in the transverse direction of extruded rods from aluminum alloy AA7049 is...     

Modelling and kinetic aspects of a BTEX contaminated air-treating biofilter

In this study, the overall performance of a biofilter was evaluated in terms of its elimination capacity by using 3-D mesh techniques. The overall results indicate that the agreement between experimental data and model predictions is excellent for benzene, toluene, ethylbenzene and o-xylene (BTEX). In this study, the maximum removal rate (r _max) values for BTEX were 0.0117, 0.0126, 0.0081 and 0.0146 g m^–3 h^–1, and the half-saturation constant (K_S ) values were calculated to be 0.269, 0.297, 0.156 and 0.394 g m^–3, respectively. For this system, the coefficients of determination (r ²) of BTEX compounds were greater than 0.97. The BTEX concentration profiles along the depth were also determined using a convection–diffusion reactor (CDR) model. The sums of squares of the errors (SSEs) of BTEX were 0.0078, 0.0059, 0.0129 and 0.0269, respectively, with r ² values greater than 0.99 for all four compounds at low concentrations.     

Electrical behavior of dual‐morphology polyaniline

An attempt was taken to synthesize two types of polyaniline (PANI) with and without solvent followed by drying in air and vacuum oven conditions resulting different morphologies. The PANIs were prepared by chemical oxidative polymerization and studied with respect to their morphological features. Scanning electron microscopy, thermogravimetric analysis, X‐ray diffractometry, Fourier transform infrared spectroscopy, and ultraviolet–visible spectroscopy techniques were used for the characterization studies. The PANI synthesized with a solvent had a mixed morphology (fibrillar and granular), whereas PANI synthesized without a solvent had only a granular morphology. The direct‐current electrical conductivities of the samples were evaluated with an electrometer. We observed that the PANIs with mixed morphology (with solvent) were more electrically conducting than those with a single morphology (without solvent). On drying in vacuo, the conductivity of PANI decreased from 3.3 × 10^?2 to 0.3 × 10^?2 S/cm with solvent treatment, whereas it decreased from 0.1 × 10^?2 to 0.3 × 10^?3 S/cm without solvent treatment. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44091.     

Impact of Functionalized Polystyrenes as the Electron Injection Layer on Gold and Aluminum Surfaces: A Combined Theoretical and Experimental Study

At metal/organic interfaces, the insertion of an organic monolayer can significantly modify the surface properties of the substrate, especially in terms of charge injection across the interface. Herein, we study the formation of an insulating monolayer of morpholine or amine-functionalized polystyrene on Al(111) and Au(111) surfaces and its impact on surface work-function and charge injection. First-principles calculations based on Density Functional Theory have been carried out and point to a significant decrease in the work-function of modified metal surfaces; this is in very good agreement with ultraviolet photoemission spectroscopy measurements performed on the Au(111) surface. In addition, a bilayer cathode, consisting of a thin film of high-work-function metal, such as Al and Au, and a layer of amine-functionalized polystyrene, was also fabricated and tested in organic light-emitting diodes. Such bilayer structures exhibit substantially enhanced efficiency when compared with controls without the functionalized polymers. Our combined theoretical and experimental investigation gives insight into how a thin layer of a commodity polymer can be used to transform rather high-work-function metals into high-performance cathodes to provide efficient electron injection.