Monomolecular and Bimolecular Recombination of Electron–Hole Pairs at the Interface of a Bilayer Organic Solar Cell

While it has been argued that field‐dependent geminate pair recombination (GR) is important, this process is often disregarded when analyzing the recombination kinetics in bulk heterojunction organic solar cells (OSCs). To differentiate between the contributions of GR and nongeminate recombination (NGR) the authors study bilayer OSCs using either a PCDTBT‐type polymer layer with a thickness from 14 to 66 nm or a 60 nm thick p‐DTS(FBTTh₂)₂ layer as donor material and C₆₀ as acceptor. The authors measure JV‐characteristics as a function of intensity and charge‐extraction‐by‐linearly‐increasing‐voltage‐type hole mobilities. The experiments have been complemented by Monte Carlo simulations. The authors find that fill factor (FF) decreases with increasing donor layer thickness (L_p) even at the lowest light intensities where geminate recombination dominates. The authors interpret this in terms of thickness dependent back diffusion of holes toward their siblings at the donor–acceptor interface that are already beyond the Langevin capture sphere rather than to charge accumulation at the donor–acceptor interface. This effect is absent in the p‐DTS(FBTTh₂)₂ diode in which the hole mobility is by two orders of magnitude higher. At higher light intensities, NGR occurs as evidenced by the evolution of s‐shape of the JV‐curves and the concomitant additional decrease of the FF with increasing layer thickness.     

Photolithographic patterning of organic photodetectors with a non-fluorinated photoresist system

We report on the fabrication of organic photodetectors (OPD) based on isolated islands of P3HT:PCBM. Pattern transfer to the active material was done with photolithography based on non-fluorinated solvents and the excessive organic semiconductor was removed with oxygen plasma reactive ion etching. The photoresist system used was found to be benign to the P3HT:PCBM layer as confirmed by absorption, thickness and roughness measurements. Current–voltage characteristics and external quantum efficiency (EQE) remained unchanged after the patterning process. It was demonstrated that it is possible to photolithographically pattern isolated islands with 200 μm edge length with the same dark current density (<10⁻⁵ A/cm² at −2 V bias voltage) and photocurrent density (>5 × 10⁻³ A/cm² at −2 V). Furthermore, concerning the solar cell performance, the patterned, small-area devices showed power conversion efficiency of 2.1% and fill-factor of 60%. Dark current was observed to depend on the size of the remaining semiconductor island, which was demonstrated on OPDs with diameter of 50 μm. The presented results show the feasibility of fabrication of isolated devices based on organic semiconductors patterned with non-fluorinated photolithography.     

Revealing Nanomechanical Domains and Their Transient Behavior in Mixed-Halide Perovskite Films

Halide perovskites are a versatile class of semiconductors employed for high performance emerging optoelectronic devices, including flexoelectric systems, yet the influence of their ionic nature on their mechanical behavior is still to be understood. Here, a combination of atomic-force, optical, and compositional X-ray microscopy techniques is employed to shed light on the mechanical properties of halide perovskite films at the nanoscale. Mechanical domains within and between morphological grains, enclosed by mechanical boundaries of higher Young's Modulus (YM) than the bulk parent material, are revealed. These mechanical boundaries are associated with the presence of bromide-rich clusters as visualized by nano-X-ray fluorescence mapping. Stiffer regions are specifically selectively modified upon light soaking the sample, resulting in an overall homogenization of the mechanical properties toward the bulk YM. This behavior is attributed to light-induced ion migration processes that homogenize the local chemical distribution, which is accompanied by photobrightening of the photoluminescence within the same region. This work highlights critical links between mechanical, chemical, and optoelectronic characteristics in this family of perovskites, and demonstrates the potential of combinational imaging studies to understand and design halide perovskite films for emerging applications such as photoflexoelectricity.     

On the power efficiency of cooperative broadcast in dense wireless networks

A fundamental problem in large scale wireless networks is the energy efficient broadcast of source messages to the whole network. The energy consumption increases as the network size grows, and the optimization of broadcast efficiency becomes more important. In this paper, we study the optimal power allocation problem for cooperative broadcast in dense large-scale networks. In the considered cooperation protocol, a single source initiates the transmission and the rest of the nodes retransmit the source message if they have decoded it reliably. Each node is allocated an-orthogonal channel and the nodes improve their receive signal-to-noise ratio (SNR), hence the energy efficiency, by maximal-ratio combining the receptions of the same packet from different transmitters. We assume that the decoding of the source message is correct as long as the receive SNR exceeds a predetermined threshold. Under the optimal cooperative broadcasting, the transmission order (i.e., the schedule) and the transmission powers of the source and the relays are designed so that every node receives the source message reliably and the total power consumption is minimized. In general, finding the best scheduling in cooperative broadcast is known to be an NP-complete problem. In this paper, we show that the optimal scheduling problem can be solved for dense networks, which we approximate as a continuum of nodes. Under the continuum model, we derive the optimal scheduling and the optimal power density. Furthermore, we propose low-complexity, distributed and power efficient broadcasting schemes and compare their power consumptions with those-of-a traditional noncooperative multihop transmission     

Role of mitochondria in the switch mechanism of the cell death mode from apoptosis to necrosis--studies on rho0 cells

Detailed mechanisms of the switch of the cell death mode from apoptosis to necrosis remain to be solved, although the intracellular level of ATP and that of free radicals have been postulated to be the major factors involved in the mechanisms. In the present study menadione (MEN)-induced cell injury processes were studied using rho0 cells derived from human osteosarcoma 143B cells and parental rho+ cells co-treated with inhibitors of electron transfer chain of mitochondria or oligomycin, an inhibitor of ATP synthesis. Treatment of rho+ cells with 100 microM MEN induced apoptosis, which reached the maximum at 6 h, and was followed by an abrupt decrease thereafter, while necrotic cells (NC) increased continuously when they were judged by Annexin V and PI double staining. On the other hand, MEN induced apoptotic and necrotic changes much faster in rho0 cells compared to rho+ cells. The frequency to find apoptotic cells (AP) in the former cells was distinctly smaller than that to find NC judged by Annexin V and PI double staining. Electron microscopically, a major population of rho0 cells treated with MEN for 6 h consisted of intermediate cells, and a small number of AP co-existed. At 9 h of the treatment intermediate cells were exclusively seen, and AP were hardly detected. When parental rho+ cells were treated with MEN in the presence of oligomycin or oligomycin plus antimycin A both apoptotic and necrotic changes of the cells were distinctly accelerated. The intracellular level of superoxide in rho0 cells continuously increased after the MEN treatment, whereas that of ATP remained distinctly low before and after the MEN treatment compared to that in rho+ cells. These data suggest that the intracellular level of superoxide may be a key factor controlling the switch from apoptosis to necrosis.     

Processing and recognition of the thermal images using wavelet transforms

This paper presents methods for improving the quality of IR images that significantly facilitate the detection of physical and structural non-uniformities in layered objects. The methods are based on wavelets transformations. Both, discrete and continuous wavelet transforms were used. The space-scale representation of thermal image are used for the detection thermal non-uniformities in the objects examined. Examples of recorded and improved images are presented in this paper.     

复合敏化乳化炸药爆速研究

通过对大量测试数据的整理和分析讨论,得出玻璃微球与气泡复合敏化的乳化炸药爆速与炸药密度、敏化剂含量等因素的关系。由显著性分析可知,复合敏化剂中的任何一种组分都对乳化炸药的爆速有显著影响。     

Reduced adipose 18∶3ω3 with weight loss by very low calorie dieting

The human undergoing rapid and sustained weight loss by very low calorie dieting (VLCD) derives the majority of daily energy needs from adipose fatty acids. To evaluate the rates of metabolic utilization of individual fatty acids in humans, two groups of adult women outpatients were studied during major weight loss by VLCD. The diets used were either food or formula, providing the recommended dietary allowance for minerals and vitamins, with fat contents of 2–20 g/d. Group 1 consisted of 10 subjects [initial body mass index (BMI) 32.7, 157% of ideal body weight (IBW)] with a mean loss of 17.7 kg in 3–5 months. Group 2 consisted of 14 subjects (initial BMI 36.7, 167% of IBW) with a mean loss of 25.6 kg in 4–5 months. Adipose tissue biopsies were obtained by needle aspiration from Group 1 before and after weight loss and from Group 2 before, at the midpoint, and after weight loss. With weight loss in Group 1, the adipose tissue content of 18∶1ω9, 18∶2ω6, and 20∶4ω6 did not change, but 18∶3ω3 fell (0.67 to 0.56 wt%, p<0.0001) as did 20∶5ω3 (0.08 to 0.05, p<0.01). Adipose tissue 22∶6ω3 rose from 0.03 to 0.07 (p<0.01). In Group 2, only 18∶3ω3 showed a change, falling from 0.71 to 0.69 to 0.59 wt% across weight loss (p=0.03 by analysis of variance). We conclude that the major fatty acids are oxidized in proportion to their composition in adipose triglyceride. The significant reduction in the concentration of 18∶3ω3 during weight loss is unique among fatty acids. Its accelerated removal from adipose tissue indicates either a preferential step in β-oxidation or a defined need during supplemented fasting which exceeds its rate of provision from adipose stores. This work was presented in part at the Annual Meeting of the American Society for Clinical Nutrition, Washington, D.C., 1988.