Development of New Sulphonyl Resin from Modification of Commercial Resin

Summary This article deals with the handy synthesis of sulfonyl resins, which were produced by the treatment of a commercial sulfonic resin (Lewatit VPOC1812^® based at divinylbenzene (DVB) and styrene (STY). The preliminary chemical modification was based on the reaction of the Lewatit VPOC1812^® with thionyl chloride aiming to produce the sulfonyl chloride groups. The best conditions to obtain the sulfonyl chloride groups were: SOCl₂/SO₃H (molar ratio) =13 at 79 °C during 72 h. The resin chlorinated was afterward treated with urea, thiourea or guanidine. The functionalized resins with urea, thiourea or guanidine were produced with 56, 68 and 93% yield, respectively. The commercial and modified resins were characterized by apparent density, swelling degree, elemental analysis (CHNS), FTIR, optical microscopy (OM) and scanning electron microscopy (SEM).     

Towards real CAD

Present-day computer-aided design (CAD) packages play only a small part in the area of mechanical engineering design, which involves the synthesis and embodiment of physical components to perform a pre-determined function without unwanted side effects. The computer cannot properly help the designer in this task until it is able to capture and process the function requirements of the design. This paper describes the computer system being developed for this purpose at the Engineering Design Centre at Cambridge University Engineering Department. The paper also explores some of the geometrical and programming implications raised.     

Influence of To?pa Peat Preparation on the phagocytic activity and bactericidal properties of granulocytes in healthy volunteers

It was found, that To?pa Peat Preparation (TPP) administered to healthy volunteers in doses of 100-300 mg/day during 14 days evoked the stimulation of the phagocytic and bactericidal activity of the granulocytes. The dose of 600 mg/day causes only a transient and insignificant increase of phagocytic and bactericidal properties of the granulocytes.     

Trends in Hydrological Parameters of a Southern Brazilian Watershed and its Relation to Human Induced Changes

The Piracicaba river basin is a subtropical watershed located in the southeastern region of Brazil. With an area of 12 400 km², the basin is a typical example of new landscape resulting from development in tropical and sub-tropical regions: establishment of intensive industrial and agricultural processes were followed by significant population growth and water management. This scenario has led to significant increase in water demand and decrease in water quality. The main objective of this study is the detection of changes in the patterns of flow and precipitation in the basin, and its possible relation to man-induced changes. Statistical analyses were performed on records of precipitation, evapotranspiration and streamflow, from 1947 to 1991. Precipitation and evapotranspiration totals showed significant increasing trends for the entire basin. From eight streamflow gauge stations, half showed significant decreasing trend. The most probable cause of such trends is the export of water from the basin to the metropolitan region of São Paulo city.     

Hydrocarbon exploration risk evaluation through uncertainty and sensitivity analyses techniques

The evaluation of the exploration risk in the oil industry is a fundamental component of the decision process related to the exploratory phase. In this paper the two basic components of the exploratory risk: trap geometry and trapped hydrocarbon quantities (fluid), are compounded in a single coherent uncertainty and sensitivity approach. The results clarify that the model geometry influences each Petroleum System Modeling step and that the geometric uncertainty is correlated with the fluid uncertainty. The geometric uncertainty evaluation makes use of geostatistical techniques that produce a number of possible realizations of the trap geometry, all compatible with available data. The evaluation of the fluid uncertainty, through a Monte Carlo methodology, allows us to compute the possible quantities of oil and gas, generated in a basin and migrated from the hydrocarbon source location to each single trap. The final result is the probability distribution of oil and gas for each trap in the basin, together with other useful indicators like: the hydrocarbon filling probability map, the closure probability map, the drainage area probability map, the spilling paths probabilities, the trap-filling scenarios.     

Hydrodechlorination of 3-chloropyridine and chlorobenzene in methanol solution over alkali-modified zirconia-supported palladium catalysts

The liquid-phase hydrodechlorination of 3-chloropyridine and chlorobenzene has been studied over alkali-modified zirconia-supported palladium catalysts. The modification of the ZrO₂ with alkali metal carbonates improves the catalytic activity of the final palladium catalyst. Therefore, the larger the ionic radii (Li⁺ < Na⁺ < K⁺), the greater the catalytic activity (TOF) of the palladium catalyst. For 3-chloropyridine, hydrodechlorination proceeds without catalyst deactivation. This is explained as the result of the interaction of reaction products (pyridine and HCl) forming pyridinium chloride, thus avoiding the detrimental effect of HCl on the palladium particles. Catalytic hydrodechlorination of chlorobenzene over Pd catalysts exhibits an initial catalytic activity (TOF) much lower than that of 3-chloropyridine and the Pd catalysts deactivate as the reaction proceeds. Finally, chlorobenzene hydrodehalogenation has also been carried out in the presence of an equimolecular amount of pyridine resulting in a decrease in the initial reaction rate on the one hand, but also in an increase in final conversion on the other.     

Infrared and ultraviolet–visible spectroscopic studies of silica, [(Cp)2ZrCl2] and trimethylaluminum interactions

Infrared and UV–vis studies of metallocene immobilization on silica are reported here. The results have indicated changes in the Zr coordination sphere of metallocene depending on the immobilization route used. The reaction of [(Cp)₂ZrCl₂] with silica formed [(Cp)₂ZrCl]⁺[SiO]⁻ species. The same metallocene, reacting with TMA modified silica, formed monomethylated and dimethylated species by the substitution of chloro for methyl ligands, stabilized on the surface by interaction with “MAO-like” species (methylaluminoxane, MAO). These monomethylated and dimethylated cationic zirconium species are the active centers for the polymerization reaction. Different order of TMA addition in the silica modification step generated surface species of a similar nature, differing in their relative quantities. The highest amount of these active species was obtained when the support was added to the TMA solution rather than adding the TMA solution to the silica support. This was the most significant parameter affecting catalytic activity in ethylene polymerization.     

Evaluation and enhancement of COBRA-TF efficiency for LWR calculations

Detailed representations of the reactor core generate computational meshes with a high number of cells where the fluid dynamics equations must be solved. An exhaustive analysis of the CPU times needed by the thermal-hydraulic subchannel code COBRA-TF for different stages in the solution process has revealed that the solution of the linear system of pressure equations is the most time consuming process. To improve code efficiency two optimized matrix solvers, Super LU library and Krylov non-stationary iterative methods have been implemented in the code and their performance has been tested using a suite of five test cases. The results of performed comparative analyses have demonstrated that for large cases, the implementation of the Bi-Conjugate Gradient Stabilized (Bi-CGSTAB) Krylov method combined with the incomplete LU factorization with dual truncation strategy (ILUT) pre-conditioner reduced the time used by the code for the solution of the pressure matrix by a factor of 20. Both new solvers converge smoothly regardless of the nature of simulated cases and the mesh structures and improve the stability and accuracy of results compared to the classic Gauss–Seidel iterative method. The obtained results indicate that the direct inversion method is the best option for small cases.