Hydrocarbon exploration risk evaluation through uncertainty and sensitivity analyses techniques

The evaluation of the exploration risk in the oil industry is a fundamental component of the decision process related to the exploratory phase. In this paper the two basic components of the exploratory risk: trap geometry and trapped hydrocarbon quantities (fluid), are compounded in a single coherent uncertainty and sensitivity approach. The results clarify that the model geometry influences each Petroleum System Modeling step and that the geometric uncertainty is correlated with the fluid uncertainty. The geometric uncertainty evaluation makes use of geostatistical techniques that produce a number of possible realizations of the trap geometry, all compatible with available data. The evaluation of the fluid uncertainty, through a Monte Carlo methodology, allows us to compute the possible quantities of oil and gas, generated in a basin and migrated from the hydrocarbon source location to each single trap. The final result is the probability distribution of oil and gas for each trap in the basin, together with other useful indicators like: the hydrocarbon filling probability map, the closure probability map, the drainage area probability map, the spilling paths probabilities, the trap-filling scenarios.     

The flame retardant mechanism of polyolefins modified with chalk and silicone elastomer

This paper presents the current understanding of the flame retardant mechanism of Casico?. The study includes the flame retardant effect of each individual component: ethylene–acrylate copolymer, chalk and silicone elastomer, as well as the formation of an intumescent structure during heating. The flame retardant properties were investigated by cone calorimetry and oxygen index tests. To obtain insight into the flame retardant mechanism, heat treatment under different conditions has also been performed. The results indicate that the flame retardant mechanism of Casico is complex and is related to a number of reactions, e.g. ester pyrolysis of acrylate groups, formation of carbon dioxide by reaction between carboxylic acid and chalk, ionomer formation and formation of an intumescent structure stabilized by a protecting char. Special emphasis is given to the formation of the intumescent structure and its molecular structure as evaluated from ¹³C MAS‐NMR and ²⁹Si MAS‐NMR, ESCA and XRD analysis. After treatment at 500°C the intumescent structure consists mainly of silicon oxides and calcium carbonate and after treatment at 1000°C the intumescent structure consists of calcium silicate, calcium oxide and calcium hydroxide. Copyright © 2003 John Wiley & Sons, Ltd.     

The electropolymerization of pyrrole at a CuNi electrode: corrosion protection properties

Pyrrole was successfully electropolymerized at a copper–nickel electrode in a near-neutral sodium oxalate solution containing Cu²⁺ cations to generate a homogenous and adherent polypyrrole film. The presence of the Cu²⁺ ions increased both the rate of the electropolymerization reaction and the adherence of the polymer at the CuNi interface. In the absence of these cations, oxidation of the electrode occurred generating a nickel-rich layer that was not sufficiently conducting, under the electropolymerization conditions employed, to facilitate the electron-transfer reaction and the electropolymerization of pyrrole.These films remained stable and exhibited significant corrosion protection properties in acidified and neutral 0.1 mol dm⁻³ NaCl solutions even on polarization of the electrodes to high anodic potentials.     

Contribution of listeners' approaching motion to auditory distance perception.

Of the several sources of acoustic information for distance perception, those arising from motion of the listener or sound source have received little attention. This motion-related information (recently called acoustic tau) is described, and experiments evaluating its utilization are presented. Accuracy and consistency at walking to the locations of briefly presented sounds were better when people listened while walking than while standing still. Manipulations of the sound to simulate shorter or longer target distances produced appropriate undershooting but not overshooting. The results indicate that people use motion-related acoustic information about distance to guide their locomotor actions, although they do not take full advantage of this information. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Diffusion with simultaneous immobilization in polymer–dye systems. I. Diffusion of the cationic dye anilana red BL in the anionically modified polyester fiber dilana

The diffusion coefficient of the cationic dye Anilana Red BL in the anionically modified polyester fiber Dilana has been calculated regarding a general diffusion-immobilization model. In the model the mobile species are distinguished from the immobilized ones. In computations of Sand's equation and experimentally determined sorption isotherm of the dye in the fiber, the rate-of-dyeing curve and the concentration profiles of the dye in the same fiber were employed. The diffusion coefficient of the mobile species of Anilana Red BL in the fiber is two orders of magnitude higher than the average diffusion coefficient obtained from Hill's equation and the apparent diffusion coefficient calculated by the Boltzmann–Matano method.     

Water quality assessment of a recently refilled reservoir: The case of Bütgenbach Reservoir, Belgium

Bütgenbach Reservoir is situated in the High Ardennes plateau in eastern Belgium (50°25′N; 6°13′E). It is used principally for flood control and for production of hydroelectric energy. It has been subjected to a previous series of studies because of its eutrophication problems and their impacts on the local economy. Bütgenbach Reservoir was emptied during spring 2004 for dam restoration, being refilled in mid‐September of the same year. Selected physicochemical and biological parameters (temperature, dissolved oxygen, pH, inorganic and organic nutrients, chlorophyll‐a) were measured fortnightly during the lake's productive season (mid‐April to mid‐October 2005) at three sampling sites throughout the water column. The water quality conditions after refilling of the lake were compared to previous studies accomplished at the same sampling sites (prior to emptying the lake). The actual trophic status was mesotrophic to eutrophic, based on the combination of total phosphorous and chlorophyll‐a concentrations, as well as water transparency. Bütgenbach Reservoir generally exhibits good water quality, based on the French water quality system SEQ‐eau. A longitudinal decrease in water quality was observed from upstream to downstream, because mainly of the differences in lake bottom morphology and water residence time, and their impacts on nutrient distribution in the lake.     

Direct Methods Optimised for Solving Crystal Structure by Powder Diffraction Data: Limits,Strategies, and Prospects

The ab-initio crystal structure solution by powder diffraction data requires great efforts because of the collapse of the experimental information onto the one dimensional 2θ axis of the pattern. Different strategies will be described aiming at improving the process of extraction of the integrated intensities from the experimental pattern in order to make more straightforward the structure solution process by direct methods. Particular attention will be devoted to the EXPO program. Some of its performance will be analysed and results will be shown.     

Laser irradiation of oligosiloxane copolymer thin films functionalized with side chain bulky carbosilane moieties

Linear oligosiloxanes functionalized with bulky side chain tris(trimethylsilyl)hexyl (TTSH) substituents were transformed into cross-linked materials by UV 193 nm excimer pulsed laser ablation. The process occurred without any catalyst, by reactions of radicals formed in UV laser induced photolysis of side tris(trimethylsilyl)hexyl groups. Chemical changes were monitored by FTIR, LC/UV, GC/MS and solubility tests.