The holy grail of microfluidics: sub-laminar drag by layout of periodically embedded microgrooves

The sub-laminar drag effect of microgroove surfaces was studied numerically in a steady two-dimensional channel flow at subcritical Reynolds numbers. Considerations are restricted to grooves of a few viscous length scales in depth, which are assumed not to promote the laminar to turbulent transition process. It was found that the drag reduction effect is due to the layout of grooves with respect to the flow direction and contour geometry. Results of computations show that for grooves of curved contour placed normal to the flow direction, drag arising from viscous and pressure forces is modulated due to the functional dependence of forces on the surface area projected in the flow direction. Such a groove layout leads to a large skin-friction reduction, but a comparable increase in pressure drag results in sub-laminar drag if drag over flat surface is considered as a reference. For a curved groove contour, the drag reduction increases with increasing Reynolds number and reaches about 5 % at Reynolds numbers approaching critical.     

Experience with model-based performance, reliability, and adaptability assessment of a complex industrial architecture

In this paper, we report on our experience with the application of validated models to assess performance, reliability, and adaptability of a complex mission critical system that is being developed to dynamically monitor and control the position of an oil-drilling platform. We present real-time modeling results that show that all tasks are schedulable. We performed stochastic analysis of the distribution of task execution time as a function of the number of system interfaces. We report on the variability of task execution times for the expected system configurations. In addition, we have executed a system library for an important task inside the performance model simulator. We report on the measured algorithm convergence as a function of the number of vessel thrusters. We have also studied the system architecture adaptability by comparing the documented system architecture and the implemented source code. We report on the adaptability findings and the recommendations we were able to provide to the system’s architect. Finally, we have developed models of hardware and software reliability. We report on hardware and software reliability results based on the evaluation of the system architecture.     

The MAC method

In this article recent advances in the Marker and Cell (MAC) method will be reviewed. The MAC technique dates back to the early 1960s at the Los Alamos Laboratories and this article starts with a historical review, and then a brief discussion of related techniques. Improvements since the early days of MAC (and the Simplified MAC - SMAC) include automatic time-stepping, the use of the conjugate gradient method to solve the Poisson equation for the corrected velocity potential, greater efficiency through stripping out the virtual particles (markers) other than those near the free surface, and more accurate approximations of the free surface boundary conditions, the addition of bounded high accuracy upwinding for the convected terms (thereby being able to solve higher Reynolds number flows), and a (dynamics) flow visualization facility. More recently, effective techniques for surface and interfacial flows and, in particular, for accurately tracking the associated surface(s)/interface(s) including moving contact angles have been developed. This article will concentrate principally on a three-dimensional version of the SMAC method. It will eschew both code verification and model validation; instead it will emphasize the applications that the MAC method can solve, from multiphase flows to rheology.     

Dynamic composition and optimization of Web services

Process-based composition of Web services has recently gained significant momentum for the implementation of inter-organizational business collaborations. In this approach, individual Web services are choreographed into composite Web services whose integration logics are expressed as composition schema. In this paper, we present a goal-directed composition framework to support on-demand business processes. Composition schemas are generated incrementally by a rule inference mechanism based on a set of domain-specific business rules enriched with contextual information. In situations where multiple composition schemas can achieve the same goal, we must first select the best composition schema, wherein the best schema is selected based on the combination of its estimated execution quality and schema quality. By coupling the dynamic schema creation and quality-driven selection strategy in one single framework, we ensure that the generated composite service comply with business rules when being adapted and optimized.     

An Interoperable Grid Information System for Integrated Resource Monitoring Based on Virtual Organizations

In many Grid infrastructures different kinds of information services are in use, which utilize different incompatible data structures and interfaces to encode and provide their data. Homogeneous monitoring of these infrastructures with the monitoring data being accessible everywhere independently of the middleware which provided it, is the basis for a consistent status reporting on the Grids’ resources and services. Thus, interoperability or interoperation between the different information services in a heterogeneous Grid infrastructure is required. Monitoring data must contain the identity of the affected Virtual Organization (VO) so that it can be related to the resources and services the VO has allocated to enable VO-specific information provision. This paper describes a distributed architecture for an interoperable information service, which combines data unification and categorization with policies for VO membership, VO resource management and data transformations. This service builds the basis for an integrated and interoperating monitoring of Grids, which provide their data to more than one VO and utilize heterogeneous information services.     

Evaluation of a type 1 diabetes serum cohort by SELDI-TOF MS protein profiling

Proteomics analysis of serum from patients with type 1 diabetes (T1D) may lead to novel biomarkers for prediction of disease and for patient monitoring. However, the serum proteome is highly sensitive to sample processing and before proteomics biomarker research serum cohorts should preferably be examined for potential bias between sample groups. SELDI‐TOF MS protein profiling was used for preliminary evaluation of a biological‐bank with 766 serum samples from 270 patients with T1D, collected at 18 different paediatric centers representing 15 countries in Europe and Japan over 2 years (2000–2002). Samples collected 1 (n = 270), 6 (n = 248), and 12 (n = 248) months after T1D diagnosis were grouped across centers and compared. The serum protein profiles varied with collection site and day of analysis; however, markers of sample processing were not systematically different between samples collected at different times after diagnosis. Three members of the apolipoprotein family increased with time in patient serum collected 1, 6, and 12 months after diagnosis (ANOVA, p<0.001). These results support the use of this serum cohort for further proteomic studies and illustrate the potential of high‐throughput MALDI/SELDI‐TOF MS protein profiling for evaluation of serum cohorts before proteomics biomarker research.     

3D Semantic Scene Completion: A Survey

International Journal of Computer Vision - Semantic scene completion (SSC) aims to jointly estimate the complete geometry and semantics of a scene, assuming partial sparse input. In the last years...     

Dynamic flow‐based particle splitting in smoothed particle hydrodynamics

In this work, a dynamic procedure for local particle refinement to be used in smoothed particle hydrodynamics (SPH) is presented. The algorithm is able to consistently produce successive levels of particle splitting in accordance to a flow‐based criterion. It has been applied together with accurate and robust formulations for variable spatial resolution in the framework of a semi‐implicit, truly incompressible scheme for SPH. Different test cases have been considered to assess the capabilities and advantages of the proposed procedure, namely, the laminar flow around circular and square obstacles in a plane channel for various regimes. Such flow cases entail the simulation of attached and separated shear layers, recirculating flow, vortex shedding and surface discontinuities. The results obtained for two levels of particle splitting have demonstrated that significant improvements may be obtained with respect to uniform particle spacing solutions in a variety of situations, thus presenting an excellent trade‐off between accuracy and computational cost. Copyright © 2015 John Wiley & Sons, Ltd.     

Optimization Techniques for Improving the Performance of Silicone‐Based Dielectric Elastomers

Dielectric elastomers are possible candidates for realizing products that are in high demand by society, such as soft robotics and prosthetics, tactile displays, and smart wearables. Diverse and advanced products based on dielectric elastomers are available; however, no elastomer has proven ideal for all types of products. Silicone elastomers, though, are the most promising type of elastomer when viewed from a reliability perspective, since in normal conditions they do not undergo any chemical degradation or mechanical ageing/relaxation. Within this review, different pathways for improving the electro‐mechanical performance of dielectric elastomers are highlighted. Various optimization methods for improved energy transduction are investigated and discussed, with special emphasis placed on the promise each method holds. The compositing and blending of elastomers are shown to be simple, versatile methods that can solve a number of optimization issues. More complicated methods, involving chemical modification of the silicone backbone as well as controlling the network structure for improved mechanical properties, are shown to solve yet more issues. From the analysis, it is obvious that there is not a single optimization technique that will lead to the universal optimization of dielectric elastomer films, though each method may lead to elastomers with certain features, and thus certain potentials.