Adaptive fusion of correlated local decisions

An adaptive fusion algorithm is proposed for an environment where the observations and local decisions are dependent from one sensor to another. An optimal decision rule, based on the maximum posterior probability (MAP) detection criterion for such an environment, is derived and compared to the adaptive approach. In the algorithm, the log-likelihood ratio function can be expressed as a linear combination of ratios of conditional probabilities and local decisions. The estimations of the conditional probabilities are adapted by reinforcement learning. The error probability at steady state is analyzed theoretically and, in some cases, found to be equal to the error probability obtained by the optimal fusion rule. The effect of the number of sensors and correlation coefficients on error probability in Gaussian noise is also investigated. Simulation results that conform to the theoretical analysis are also presented     

Mobility support for IP over wireless ATM

A wireless ATM system consists of a core network infrastructure that provides mobility support to end terminals and a wireless access link. This article outlines two schemes for supporting mobility of IP terminals in this network. In the first scheme, location management and handoff support is integrated within the ATM signaling and control framework (“mobile ATM”), and mobility is transparently supported at the IP layer by mobile ATM underneath. In the second approach, the IP protocol stack is directly executed on ATM switches (without an intermediate ATM signaling stack) using an IP switching technique called IPSOFACTO (IP Switching Over Fast ATM Cell Transport), and terminal mobility is supported via mobile IP     

Efficient and reliable link state information dissemination

Distributing link state information may place a heavy burden on the network resource. In this letter, based on the tree-based reliable topology (TRT), we propose a simple but efficient and reliable scheme for disseminating link state information. We show that the computational complexity of computing the subnet topology over which link state information is distributed is the same as that of computing the minimum spanning tree.     

Bandwidth allocation for multiservice access on EPONs

Ethernet passive optical networks are a low-cost high-speed solution to the bottleneck problem of the broadband access network. A major characteristic of EPONs is the shared upstream channel among end users, mandating efficient medium access control to facilitate statistical multiplexing and provision multiple services for different types of traffic. This article addresses and provides an overview of the upstream bandwidth allocation issue for multiservice access provisioning over EPONs, and proposes an algorithm for dynamic bandwidth allocation with service differentiation. Based on the multipoint control protocol (MPCP) and bursty traffic prediction, our algorithm enhances QoS metrics such as average frame delay, average queue length, and frame loss probability over other existing protocols     

Ultra Wideband Co-planer Microstrip Patch Antenna for Wireless Applications

In this paper, a comparative study of co-planar gap coupled rectangular and elliptical microstrip patch antenna is presented. It is analyzed by using circuit theory concept. The proposed antennas show ultra wideband operations which depend on dimensions of the patches, gap between them as well as air gap thickness. It is observed that the performance of gap coupled elliptical patch antenna is better than that of rectangular patch antenna while the area of rectangular and elliptical patches is same. The bandwidth of proposed rectangular patch antenna is found to be 50.7 % with average gain of 6.5 dBi while for elliptical patch antenna the bandwidth and gain further improves up to 57.6 % and 9.5 dBi respectively. The theoretical results are in good agreement with the simulated results obtained from IE3D simulation software.     

Finding all hops shortest paths

In this letter, we introduce and investigate a new problem referred to as the All Hops Shortest Paths (AHSP) problem. The AHSP problem involves selecting, for all hop counts, the shortest paths from a given source to any other node in a network. We derive a tight lower bound on the worst-case computational complexities of the optimal comparison-based solutions to AHSP.     

IP traceback with deterministic packet marking

We propose a new approach for IP traceback which is scalable and simple to implement, and introduces no bandwidth and practically no processing overhead. It is backward compatible with equipment which does not implement it. The approach is capable of tracing back attacks, which are composed of just a few packets. In addition, a service provider can implement this scheme without revealing its internal network topology.     

Optical and electrical properties of electrochemically deposited polyaniline-CeO2 hybrid nanocomposite film

This paper reports the optical and electrical properties of electrochemically deposited polyaniline (PANI)-cerium oxide (CeO2) hybrid nano-composite film onto indium-tin-oxide (ITO) glass substrate. UV–visible spectroscopy and I-V characteristic were performed to study the optical and electrical parameters of the electrochemically deposited film. The film exhibited a strong absorption below 400 nm (3.10 eV) with a well defined absorbance peak at around 285nm (4.35 eV). The estimated band gap of the CeO2 sample was 3.44 eV and this value is higher than bulk CeO2 powder (Eg = 3.19 eV) due to quantum confinement effect.     

Low voltage second-order alpha function synapse

This paper introduces a Transimpedance Amplifier (TIA) design capable of producing an incremental input resistance in the ohmic range, for input signals in the microampere range, such as are encountered in the design of instrumentation for electrochemical ampero-metric sensors, optical-sensing and current-mode circuits. This low input-resistance is achieved using an input stage incorporating negative feedback. In a Cadence simulation of an exemplary design using a 180 nm CMOS process and operating with?±?1.8 V supply rails, the input resistance is 1.05 ohms and the power dissipation is 93.6 µW. The bandwidth, for a gain of 100 dBohm, exceeded 9 MHz. For a 1µA, 1 MHz sinusoidal input signal the Total Harmonic Distortion, with this gain, is less than 1%. The input referred noise current with zero photodiode capacitance is 2.09 pA/√Hz and with a photodiode capacitance of 2pF is 8.52 pA/√Hz. Graphical data is presented to show the effect of a photodiode capacitance varying from 0.5 to 2 pF, when the TIA is used in optical sensing. In summary, the required very low input resistance, at a low input current level (µA) is achieved and furthermore a Table is included comparing the characteristics and a widely used Figure of Merit (FOM) for the proposed TIA and similar published low-power TIAs. It is apparent from the Table that the FOM of the proposed TIA is better than the FOMs of the other TIAs mentioned.

     

Synthesis and optical properties of nanostructured Ce(OH)4

Nanocrystalline cerium hydroxide (NCs-Ce(OH)4) is a intermediate product of CeO2, synthesized successfully using by a novel and simple wet chemical rout at ambient temperature for the preparation of NCs CeO2 powder and film on mass scale for various purposes. The synthesized NCs-Ce(OH)4 was characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM), thermo-gravimetric analysis (TGA), Fourier transform infrared (FTIR), UV-Visible and photoluminescence (PL) spectroscopy. The average crystallite size of NCs-Ce(OH)4 has been estimated by Scherrer equation was to be 3-4 nm. The SEM examinations show that the surface texture was very uniformly agglomerated and homogeneous. Thermal analysis suggests that cerium (IV) ion is in the tetra hydrated form. Absorption and luminescence spectroscopic studies have been examined for future application in the development of optical devices.