Three-phase self-excited induction generators: an overview

Induction generators are increasingly being used in nonconventional energy systems such as wind, micro/mini hydro, etc. The advantages of using an induction generator instead of a synchronous generator are well known. Some of them are reduced unit cost and size, ruggedness, brushless (in squirrel cage construction), absence of separate dc source, ease of maintenance, self-protection against severe overloads and short circuits, etc. In isolated systems, squirrel cage induction generators with capacitor excitation, known as self-excited induction generators (SEIGs), are very popular. This paper presents an exhaustive survey of the literature over the past 25 years discussing the process of self-excitation and voltage buildup, modeling, steady-state, and transient analysis, reactive power control methods, and parallel operation of SEIG.     

Raman Study of Hi-Nicalon-Fiber-Reinforced Celsian Composites: II, Residual Stress in Fibers

Band shifts in Raman spectra were used to assess, on a microscopic scale, the residual strain existing in Hi-Nicalon silicon carbide fibers reinforcing celsian-matrix composites. Uncoated as well as p-BN/SiC-coated and p-B(Si)N/SiC-coated Hi-Nicalon fibers were used as the reinforcements. We unambiguously conclude that the fibers were in a state of compressive residual stress. Quantitative determination of the residual stress was made possible by taking into account the heating induced by laser probing and by using a reference line, of fixed wavenumber. We found fiber compressive residual stress values between 110 and 960 MPa, depending on the fiber/matrix coating in the composite. A stress relaxation-like phenomenon was observed at the surface of p-BN/SiC-coated Hi-Nicalon fibers whereas the uncoated or p-B(Si)N/SiC-coated Hi-Nicalon fibers did not show any stress relaxation in the celsian-matrix composites.     

Cutting to the chase [microwave car stopper]

This article presents a microwave device that could spell the end of hair-raising car chases. A prototype has been commissioned by law enforcement agencies and police forces in the United States and Britain have ordered tests of the new system. This car zapper is designed to fit in the trunk of a police car with a directive antenna mounted on the roof. At the touch of a button, a police officer can direct a jolt of microwave energy at a speeding car. The electromagnetic impulse induces high transient currents in the wires leading to the microprocessor of the suspect's car and disables the ignition.     

Fundamental Limits of Organic Packages and Boards and the Need for Novel Ceramic Boards for Next Generation Electronic Packaging

The system-on-a-package (SOP) paradigm proposes a package level integration of digital, RF/analog and opto-electronic functions to address future convergent microsystems. Two major components of SOP fabrication are sequential build-up of multiple layers (4–8) of conducting copper patterns with interlayer dielectrics on a board and multiple ICs flip-chip bonded on the top layer. A wide range of passives, wave-guides and other RF and opto-electronic components buried within the dielectric layers provide the multiple functions on a single microminiaturized platform.The routing of future nanoscale ICs with 10,000+ I/Os require multiple build-up layers of ultra fine board feature sizes of 10 m lines/space widths and 40 m pad diameters. Current FR4 boards cannot achieve this build-up technology because of dimensional instability during processing. These boards also undergo high warpage during the sequential build-up process which limits the fine-line lithography and also causes misalignment between the vias and their corresponding landing pads. In addition, the CTE mismatch between the silicon die and the board leads to IC-package interconnect reliability concerns, particularly in future fine-pitch assemblies where underfilling becomes complicated and expensive.This work reports experimental and analytical work comparing the performance of organic and novel ceramic boards for SOP requirements. The property requirements as deduced from these results indicate that a high stiffness and tailorable CTE from 2–4 ppm/C is required to enable SOP microminiaturized board fabrication and assembly without underfill. A novel ceramic board technology is proposed to address these requirements.     

Taking the grind out of grinding

Existing uses of RF/microwave heating involve soft targets. This article focuses on current research being carried out in the United Kingdom and South Africa, where microwave energy is being applied to "soften up" rocks for the purpose of mineral extraction.     

Evaluating the role of composition and local structure on alkali out-diffusion in glasses for thin-film solar cells

The presence of alkali ions has reportedly improved the performance of CIGS/CZTS–based thin-film solar cells. The out-diffusion of the alkali ion, in particular, Na, from the glass substrate offers a facile scalable route of supplying the alkali ions during the growth of the absorber layer. In this work, we demonstrate the diffusion of different alkali ions (Li/Na/K) from composition tuned glasses with intentionally incorporated excess alkali ions into a thin Mo film, typically used as a bottom electrode in solar cells. We also evaluate the physical, mechanical, and thermal properties of the glasses for suitability as a substrate in thin-film deposition. The out-diffusion of alkali ions to the overlayer is found to be critically influenced by the composition and the local structure of the glasses. The Na ions exhibit the highest extent of diffusion among the alkali ions present in glass substrates, while that for the K-ions is the lowest. For the glasses with mixed alkali ions, the presence of Li facilitated the out-diffusion of Na, whereas K ions appear to inhibit the same. Differently with the existing reports, we show that the activation energy and the presence of Ca ions as additional modifiers play a crucial role in the transport mechanism of the ions. In addition, the synthesized glasses exhibit hardness of the order 5-7 GPa, density ~2.55 g cm^-3. The glass transition temperature lies between 535 and 580°C and the coefficient of thermal expansion 8.5-10 ppm/K, which is highly suitable for use as substrates in thin-film solar cells.     

The Yeast ATF1 Acetyltransferase Efficiently Acetylates Insect Pheromone Alcohols: Implications for the Biological Production of Moth Pheromones

Many moth pheromones are composed of mixtures of acetates of long‐chain (≥10 carbon) fatty alcohols. Moth pheromone precursors such as fatty acids and fatty alcohols can be produced in yeast by the heterologous expression of genes involved in insect pheromone production. Acetyltransferases that subsequently catalyze the formation of acetates by transfer of the acetate unit from acetyl‐CoA to a fatty alcohol have been postulated in pheromone biosynthesis. However, so far no fatty alcohol acetyltransferases responsible for the production of straight chain alkyl acetate pheromone components in insects have been identified. In search for a non‐insect acetyltransferase alternative, we expressed a plant‐derived diacylglycerol acetyltransferase (EaDAcT) (EC 2.3.1.20) cloned from the seed of the burning bush (Euonymus alatus) in a yeast system. EaDAcT transformed various fatty alcohol insect pheromone precursors into acetates but we also found high background acetylation activities. Only one enzyme in yeast was shown to be responsible for the majority of that background activity, the acetyltransferase ATF1 (EC 2.3.1.84). We further investigated the usefulness of ATF1 for the conversion of moth pheromone alcohols into acetates in comparison with EaDAcT. Overexpression of ATF1 revealed that it was capable of acetylating these fatty alcohols with chain lengths from 10 to 18 carbons with up to 27‐ and 10‐fold higher in vivo and in vitro efficiency, respectively, compared to EaDAcT. The ATF1 enzyme thus has the potential to serve as the missing enzyme in the reconstruction of the biosynthetic pathway of insect acetate pheromones from precursor fatty acids in yeast.     

A technoeconomic simulation model for A hybrid solar water heating system

A simple mathematical model has been developed to evaluate the technoeconomic performance of a hybrid solar water heating system for commercial and industrial applications. Numerical calculations, corresponding to Delhi climatic data and for the prevalent cost of a solar energy system in the Indian market, show that the optimum collector area (meeting nearly 45 percent of the daily hot water demand M litres) is 0–0075 Mm²; either a reduction of about 35 per cent in the present solar collector costs or a more than 20 per cent rise in the cost of presently subsidized diesel oil makes the solar option economic. With the present parameters the cost of useful solar energy is higher than that obtained from the conventional system.     

Transforming generate-and-test programs to execute under committed-choice AND-parallelism

This paper concerns the exploitation of user transparent inherent parallelism of pure Prolog programs using program transformation. We describe a novel paradigmenumerate-and-filter for transforming generate-and-test programs for execution under the committed-choice model extended to incorporate multiple solutions based on set enumeration. The paradigm simulates OR-parallelism by stream AND-parallelism integrating OR-parallelism, AND-parallelism, and stream parallelism. Generate-and-test programs are classified into three categories:simple generate-and-test, recursively embedded generate-and-test, and deeply intertwined generate-and-test. The intermediate programs are further transformed to reduce structure copying and metacalls. Algorithms are presented and demonstrated by transforming the representative examples of different classes of generate-and-test programs to Flat Concurrent Prolog equivalents. Statistics show that the techniques are efficient.Funded in part by Cleveland Advanced Manufacturing Program through the State of Ohio as a part of its core research program grant to Center of Automation and Intelligent Systems Research, Case Western Reserve University and NSF equipment grant CDA-8820390 to Kent State University.