Factors influencing the production of volatile phenols by wine lactic acid bacteria

This work aimed to evaluate the effect of certain factors on the production of volatile phenols from the metabolism of p-coumaric acid by lactic acid bacteria (LAB) (Lactobacillus plantarum, L. collinoides and Pediococcus pentosaceus). The studied factors were: pH, L-malic acid concentration, glucose and fructose concentrations and aerobic/anaerobic conditions. It was found that, in the pH range of 3.5 to 4.5, the higher the pH the greater the production of volatile phenols. This behaviour is correlated with the effect of pH on bacterial growth. Increasing levels of L-malic acid in the medium diminished the production of 4-vinylphenol (4VP) and stimulated the production of 4-ethylphenol (4EP) by L. plantarum NCFB 1752 and L. collinoides ESB 99. The conversion of 4VP into 4EP by the activity of the vinylphenol reductase may be advantageous to the cells in the presence of L-malic acid, presumably due to the generation of NAD+, a cofactor required by the malolactic enzyme. Relatively high levels of glucose (20 g/L) led to an almost exclusive production of 4VP by L. plantarum NCFB 1752, while at low concentrations (≤ 5 g/L), 4EP is mainly or solely produced. Part of the glucose may be diverted to the production of mannitol as an alternative pathway to regenerate NAD+. This is corroborated by the experiments done with fructose, a compound that can be used as an electron acceptor by some bacteria becoming reduced to mannitol. In anaerobiosis, the reduction of 4VP into 4EP is clearly favoured, which is consistent with the need to increase the availability of NAD+ in these conditions. This study shows that the amount and the ratio 4VP/4EP produced by LAB are greatly affected by certain environmental and medium composition factors. The behaviour of the bacteria seems to be driven by the intracellular NAD+/NADH balance.     

Biofilms of Listeria monocytogenes produced at 12 °C either in pure culture or in co-culture with Pseudomonas aeruginosa showed reduced susceptibility to sanitizers

The biofilm-forming ability of 21 Listeria monocytogenes isolates, previously pulsotyped and corresponding to 16 strains, from different origins was evaluated using the Calgary Biofilm Device, at 37 °C. Biofilms of 4 selected strains were also produced either on pure cultures or on co-cultures with Pseudomonas aeruginosa (PAO1), at 12 °C and at 37 °C. For these biofilms, the minimum biofilm eradication concentrations (MBECs) of 4 commercial dairy sanitizers (1 alkyl amine acetate based--T99, 2 chlorine based--T66 and DD, and 1 phosphoric acid based--BP) were determined. Listeria monocytogenes biofilms grown, either at 37 °C or 12 °C, were able to achieve similar cell densities by using different incubation periods (24 h and 7 d, respectively). In co-culture biofilms, P. aeruginosa was the dominant species, either at 37 °C or at 12 °C, representing 99% of a total biofilm population of 6 to 7 log CFU/peg. Co-culture biofilms were generally less susceptible than L. monocytogenes pure cultures. More interestingly, the biofilms produced at 12 °C were usually less susceptible to the sanitizers than when produced at 37 °C. Single or co-culture biofilms of L. monocytogenes and PAO1, particularly produced at 12 °C, retrieved MBEC values for agents T99 and BP that were, at times, above the maximum in-use recommended concentrations for these agents. The results presented here reinforce the importance of the temperature used for biofilm formation, when susceptibility to sanitizers is being assessed. PRACTICAL APPLICATION: Since most food plants have cold wet growth niches in production and storage areas, susceptibility testing should be performed on biofilms produced at refrigeration temperatures. Moreover, the efficiency of the sanitizers used in food industries should be performed on mixed culture biofilms, since in field conditions these will predominate. The results presented here highlight the importance of the temperature used for biofilm formation, when susceptibility to disinfectants is being assessed, as biofilms produced at lower temperature were less susceptible to sanitizers.     

Immersive $$360^{\circ }$$ video user experience: impact of different variables in the sense of presence and cybersickness

Universal Access in the Information Society - Virtual Reality (VR) has been recently gaining interest from researchers and companies, contributing to the development of the associated technologies...     

Monitoring Methodology of Interventions for Riverbanks Stabilization: Assessment of Technical Solutions Performance

The success of the river rehabilitation process depends not only on the intervention project but also on the attention given to the monitoring and evaluation of the implemented measures. In spite of the recent efforts on the quantification and sharing of interventions’ results, there are still very few written records documenting that information. The present work proposes a monitoring methodology for riverbanks’ stabilization interventions by comparing the results obtained by monitoring the implemented technical solutions with the corresponding theoretical time-expected performance. For this purpose, two case studies located in the south of Portugal were analysed. For each of those case studies, the dominant factors that influenced the temporal evolution of the observed outcomes were assessed. It was possible to verify that, depending on the implemented technical solution type and on the specific characteristics of the intervention site, monitoring actions can be fundamental to achieve the expected technical and ecological efficiency, namely when bioengineering technical solutions are involved. This work led to the development of a database structure that will gather information on the application of the proposed methodology over time and that shall be improved with the analysis of the behaviour of other riverbanks’ stabilization interventions. The development of this database will surely contribute to enable choosing and applying the most adequate riverbank protection solutions.     

Thermal-responsive hydrogels for sublingual administration of Ondansetron™

Thermo-sensitive hydrogels were prepared by grafting N-isopropylacrylamide (NIPAAm) onto chitosan and dextran. The grafting reactions were performed during variable periods of time and different films were obtained. To prepare a drug-delivery system for sublingual delivery of Ondansetron?, this drug was entrapped in the films. Elemental analysis results showed that the amount of poly(NIPAAm) in the final films increased with reaction time, influencing their lower critical solution temperature and swelling behavior. Also, drug release profile depended on grafting extension as well as on the temperature, as the release of Ondansetron? presented a more sustained-like profile at physiologic temperature.     

Potential of NMR spectroscopy for the study of human amniotic fluid

1D and 2D 800 MHz high-resolution nuclear magnetic resonance spectroscopy of human amniotic fluid (HAF) enabled the identification of approximately 50 metabolites. In addition, liquid chromatography-NMR and diffusion ordered spectroscopy (DOSY) allowed signal overlap to be reduced and the characterization of higher molecular weight (Mw) components, respectively. Indeed, the DOSY spectrum of a Mw >10 kDa HAF fraction enabled three protein families, differing in average Mw, to be detected and may therefore be of potential value in the study of disorder-related variations in HAF protein profiles. The effects of freeze-drying, storage at -20 or -70 degrees C, and freeze-thawing cycles on HAF compositional stability were investigated, as well as stability at room temperature (to account for overnight data acquisition runs). These data are the basis for establishing statistically validated correlations between HAF NMR data and any physiological disorders of the fetus/mother. Freeze-drying caused signal loss for urea, ethanol, and compounds resonating at 2.22 and 1.17 ppm. Storage at -70 degrees C or lower is recommended since only minor compositional changes were observed, affecting mainly acetate and pyruvate. Freeze-thaw cycles did not cause significant compositional changes, and room-temperature stability studies indicated a 4-5 h maximum period of handling/acquisition time to ensure HAF stability.     

Preparation,structural development,and mechanical properties of microfibrillar composite materials based on polyethylene/polyamide 6 oriented blends

The preparation of microfibrillar composites (MFCs) based on oriented blends of polyamide 6 (PA6) and high‐density polyethylene (HDPE) is described. By means of conventional processing techniques, the PA6 phase was transformed in situ into fibrils with diameters in the upper nanometer range embedded in an isotropic HDPE matrix. Three different composite materials were prepared through the variation of the HDPE/PA6 ratio with and without a compatibilizer: MFCs reinforced by long PA6 fibrils arranged as a unidirectional ply; MFCs containing middle‐length, randomly distributed reinforcing PA6 bristles; and a nonoriented PA6‐reinforced material in which the PA6 phase was globular. The evolution of the morphology in the reinforcing phase (e.g., its visible diameter, length, and aspect ratio) was followed during the various processing stages as a function of the blend composition by means of scanning electron microscopy. Synchrotron X‐ray scattering was used to characterize selected unidirectional ply composites. The presence of transcrystalline HDPE was demonstrated in the shell of the reinforcing PA6 fibrils of the final MFCs. The impact of the compatibilizer content on the average diameter and length of the fibrils was assessed. The influence of the reinforcing phase on the tensile strength and Young's modulus of the various composites was also evaluated. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Partial oxidation of methane over bimetallic nickel–lanthanide oxides

The study of partial oxidation of methane (POM) over bimetallic nickel–lanthanide oxides was undertaken. Binary intermetallic compounds of the type LnNi (Ln = Pr, Gd, Lu) were used as bimetallic nickel–lanthanide oxides precursors and the products (NiO·Pr₂NiO₄, 2NiO·Gd₂O₃ and 2NiO·Lu₂O₃) were characterized by means of X-ray diffraction, X-ray photoelectron spectroscopy, Raman and temperature programmed reduction. The catalytic activity increases when gadolinium or lutetium replaces praseodymium and the selectivity of the bimetallic nickel–lanthanide oxides is clearly different from that of single metal oxides and/or mechanical mixtures.The existence of an unusual synergism effect between the two metal oxide phases (NiO and Ln₂O₃) that lead to higher conversions of methane and higher selectivities to hydrogen and carbon monoxide correlate also the catalysts stability to deactivation. The activity and selectivity of the gadolinium and lutetium compounds is, under the same conditions, equivalent to that of a platinum commercial catalyst, 5 wt% Pt/Al₂O₃, which stresses the good catalytic performance of this new type of compounds for the production of H₂ and CO (H₂/CO = 2).