Flow Instabilities in Linear and Branched Syndiotactic Poly(propylene)s

Extrusion flow experiments of linear and branched syndiotactic poly(propylene)s were carried out. The work was focused on flow instabilities. Ionized radiation was employed to induce long chain branching in linear samples. Sharkskin and melt fracture were postponed in the case of slightly long branched samples, which possess an enhanced melt elasticity compared to linear samples. For the most elastic samples the nature of the flow instability changed: sharkskin disappeared and melt fracture was observed instead. The correlation between sharkskin and melt strength results is discussed.

     

Protective Effect of Memantine on Bergmann Glia and Purkinje Cells Morphology in Optogenetic Model of Neurodegeneration in Mice

Spinocerebellar ataxias are a family of fatal inherited diseases affecting the brain. Although specific mutated proteins are different, they may have a common pathogenetic mechanism, such as insufficient glutamate clearance. This function fails in reactive glia, leading to excitotoxicity and overactivation of NMDA receptors. Therefore, NMDA receptor blockers could be considered for the management of excitotoxicity. One such drug, memantine, currently used for the treatment of Alzheimer’s disease, could potentially be used for the treatment of other forms of neurodegeneration, for example, spinocerebellar ataxias (SCA). We previously demonstrated close parallels between optogenetically induced cerebellar degeneration and SCA1. Here we induced reactive transformation of cerebellar Bergmann glia (BG) using this novel optogenetic approach and tested whether memantine could counteract changes in BG and Purkinje cell (PC) morphology and expression of the main glial glutamate transporter—excitatory amino acid transporter 1 (EAAT1). Reactive BG induced by chronic optogenetic stimulation presented increased GFAP immunoreactivity, increased thickness and decreased length of its processes. Oral memantine (~90 mg/kg/day for 4 days) prevented thickening of the processes (1.57 to 1.81 vs. 1.62 μm) and strongly antagonized light-induced reduction in their average length (186.0 to 150.8 vs. 171.9 μm). Memantine also prevented the loss of the key glial glutamate transporter EAAT1 on BG. Finally, memantine reduced the loss of PC (4.2 ± 0.2 to 3.2 ± 0.2 vs. 4.1 ± 0.3 cells per 100 μm of the PC layer). These results identify memantine as potential neuroprotective therapeutics for cerebellar ataxias.     

Chemical stability of some poly(amide imide) type polymers

The stability of some heterocyclic poly(amide imide)s in acidic and alkaline medium was compared to the structurally related polyimide and poly(amide imide)s without other heterocyclic groups. All the polymers have high stability in acidic medium. The introduction of additional heterocycles such as 1,3,4-0xadiazole or phenylquinoxaline into the macromolecular chain of a poly(amide imide) increases substantially the resistance to alkaline medium. Polyamides containing imide rings only in the side chain are more stable to hydrolysis than related polyamide having imide units in the main chain.     

Processing parameters of the diethylenetriamine and unsaturated aldehyde resin

The dependence of processing parameters of the reaction between diethylenetriamine (DETA) and crotonaldehyde (CR) or cinnamaldehyde (CA) on reaction time were followed by calorimetric and viscosity measurements. Resins with molecular weights up to 800 g/mol and content of unreacted monomers under 1% were formed. The most reactive were the amino and aldehyde groups. The aldehyde groups are five times more reactive than double bonds. ? NHCHOH, ? CH₂NH? , ? CHNH? , and ? N?CH? groups were formed. The rates of the reactions and the rate constants decrease with increasing molar ratio between DETA and unsaturated aldehydes. The heat of the addition of DETA to CR was up to 54 KJ/mol and the total heat of reaction was up to 71 KJ/mol. The heat of addition of DETA to CA was up to 32 KJ/mol and the total heat of reaction was up to 61 KJ/mol. For DETA and CR the activation energy of condensation were 57.3 KJ/mol, and 42.0 KJ/mol for DETA and CA. The viscosity of the final products increased up to hard resins.     

Techno-economic assessment of providing control energy reserves with a biogas plant

Grid stability is being challenged by the increasing integration of power plants with volatile power generation into the energy system. Power supply fluctuations must be compensated by energy system flexibility. The storability of the energy carrier enables biogas plants to generate power flexibly. In this study, the technical and economic effects of providing positive secondary control energy reserves with an Austrian biogas plant were assessed. The plant’s main focus lies in biomethane production with the option of heat and power generation through combined heat and power (CHP) units. A detailed simulation model of the investigated biogas plant was developed, which is presented in this work. Ex-post simulations of one year of flexible plant operation were conducted with this model. The findings show that the installed biogas storage capacity is sufficient to provide control energy reserves while simultaneously producing biomethane. Profitability of providing control energy reserves largely depends on the prices at the control energy market and on CHP unit start-up costs. A cost efficiency analysis demonstrated that investing in a hot water tank with a volume of 5 m³ for short-term heat storage turned out to be economically viable.

Open image in new window

     

Dynamic mechanical behaviour of random copolymers of a LC-methacrylate and octyl methacrylate

The dynamic mechanical behaviour of random copolymers of LC monomer-1-(hexyloxycarbonyl)ethyl 4-[4-(methacryloyloxy)benzoyloxy]benzoate (HB) and octyl methacrylate (OMA) was studied in the main transition and flow regions. Even though the aliphatic end groups of the side chain of HB and OMA are roughly the same, the T _g temperature of poly(HB) is ∼ 80 K higher than that of poly(OMA); this fact is due to the presence of the stiff phenyl benzoate mesogenic group in the side chain of HB. With increasing content of OMA in the copolymer the superimposed curves of the storage G′ _p and loss G′′ _p moduli at a constant temperature shift towards shorter frequencies. It has been shown that this shift is mainly due to an increase of the free volume in the copolymers with increasing content of OMA. While HB monomer shows liquid crystalline (LC) properties, its polymer (poly(HB)) and random copolymers with OMA show only isotropic thermal behaviour because no flexible spacer is present in the side chain of HB which would decouple the main chain and mesogenic group motions. This means that neither the homopolymer of HB, nor its copolymers with a flexible comonomer retain the LC properties of the starting LC monomer, HB. Received: 26 September 1996/Revised: 7 November 1996/Accepted: 7 November 1996     

Degradation Products of Tryptophan in Cell Culture Media: Contribution to Color and Toxicity

Biomanufacturing processes may be optimized by storing cell culture media at room temperature, but this is currently limited by their instability and change in color upon long-term storage. This study demonstrates that one of the critical contributing factors toward media browning is tryptophan. LC-MS technology was utilized to identify tryptophan degradation products, which are likely formed primarily from oxidation reactions. Several of the identified compounds were shown to contribute significantly to color in solutions but also to exhibit toxicity against CHO cells. A cell-culture-compatible antioxidant, a-ketoglutaric acid, was found to be an efficient cell culture media additive for stabilizing components against degradation, inhibiting the browning of media formulations, and decreasing ammonia production, thus providing a viable method for developing room-temperature stable cell culture media.     

A Novel Volume-Stable Collagen Matrix Induces Changes in the Behavior of Primary Human Oral Fibroblasts,Periodontal Ligament,and Endothelial Cells

The aim of the present study was to investigate the influence of a novel volume-stable collagen matrix (vCM) on early wound healing events including cellular migration and adhesion, protein adsorption and release, and the dynamics of the hemostatic system. For this purpose, we utilized transwell migration and crystal violet adhesion assays, ELISAs for quantification of adsorbed and released from the matrix growth factors, and qRT-PCR for quantification of gene expression in cells grown on the matrix. Our results demonstrated that primary human oral fibroblasts, periodontal ligament, and endothelial cells exhibited increased migration toward vCM compared to control cells that migrated in the absence of the matrix. Cellular adhesive properties on vCM were significantly increased compared to controls. Growth factors TGF-β1, PDGF-BB, FGF-2, and GDF-5 were adsorbed on vCM with great efficiency and continuously delivered in the medium after an initial burst release within hours. We observed statistically significant upregulation of genes encoding the antifibrinolytic thrombomodulin, plasminogen activator inhibitor type 1, thrombospondin 1, and thromboplastin, as well as strong downregulation of genes encoding the profibrinolytic tissue plasminogen activator, urokinase-type plasminogen activator, its receptor, and the matrix metalloproteinase 14 in cells grown on vCM. As a general trend, the stimulatory effect of the vCM on the expression of antifibrinolytic genes was synergistically enhanced by TGF-β1, PDGF-BB, or FGF-2, whereas the strong inhibitory effect of the vCM on the expression of profibrinolytic genes was reversed by PDGF-BB, FGF-2, or GDF-5. Taken together, our data strongly support the effect of the novel vCM on fibrin clot stabilization and coagulation/fibrinolysis equilibrium, thus facilitating progression to the next stages of the soft tissue healing process.     

Interface reactions between rutile coatings and molten aluminium or AlSi7Mg0.6 alloy

Rutile coatings deposited on corundum substrates are considered as promising functional elements improving the efficiency of the filtration of oxide inclusions out of aluminium melts. This contribution describes the reactions between rutile and two kinds of the aluminium melts and discusses the consequences of these reactions for the filtration process. It was found that the contact of rutile coatings with molten aluminium leads to the formation of a corundum layer at the solid/liquid interface. The exposure of the rutile coatings to molten AlSi7Mg0.6 alloy produces an interface layer of MgTiO₃. The interface layers possess defined orientation relationship to rutile which is characteristic for locally heteroepitaxial growth. The density functional theory calculations revealed that the TiO₂/α-Al₂O₃ and TiO₂/MgTiO₃ interfaces with the orientation relationships observed experimentally have low interface energies. The mechanisms of the interface layer formation and the impact of these layers on the degradation of the rutile coatings are discussed.