The Non-Erythropoietic EPO Analogue Cibinetide Inhibits Osteoclastogenesis In Vitro and Increases Bone Mineral Density in Mice

The two erythropoietin (EPO) receptor forms mediate different cellular responses to erythropoietin. While hematopoiesis is mediated via the homodimeric EPO receptor (EPOR), tissue protection is conferred via a heteromer composed of EPOR and CD131. In the skeletal system, EPO stimulates osteoclast precursors and induces bone loss. However, the underlying molecular mechanisms are still elusive. Here, we evaluated the role of the heteromeric complex in bone metabolism in vivo and in vitro by using Cibinetide (CIB), a non-erythropoietic EPO analogue that exclusively binds the heteromeric receptor. CIB is administered either alone or in combination with EPO. One month of CIB treatment significantly increased the cortical (~5.8%) and trabecular (~5.2%) bone mineral density in C57BL/6J WT female mice. Similarly, administration of CIB for five consecutive days to female mice that concurrently received EPO on days one and four, reduced the number of osteoclast progenitors, defined by flow cytometry as Lin⁻CD11b⁻Ly6C^hi CD115⁺, by 42.8% compared to treatment with EPO alone. In addition, CIB alone or in combination with EPO inhibited osteoclastogenesis in vitro. Our findings introduce CIB either as a stand-alone treatment, or in combination with EPO, as an appealing candidate for the treatment of the bone loss that accompanies EPO treatment.     

Elevated temperature impact on performance of Low Temperature Co-fired Ceramic dielectrics

The need for electronics to operate at temperatures of 200°C and above continues to grow. These applications include avionics, aerospace, automotive, downhole drilling, mining, and many others. To satisfy this demand, a significant amount of research and development has been conducted. Despite the efforts, the number of new electronic components designed specifically for high-temperature operation is still relatively limited. In Low Temperature Co-fired Ceramic (LTCC) packages, LTCC materials are generally used as the host media for a number of pre-fabricated semiconductor components. As a result, reliability of the entire LTCC package largely depends on the performance of the least robust component. Ferro A6M-E and Ferro L8 are the two well-established and recognized LTCC dielectrics widely used for mid and high frequency LTCC applications, including several high reliability aerospace and defense applications that require demanding Mil-Spec qualifications. This study is our first attempt to characterize and understand basic high-temperature dielectric properties of these two commercial LTCC materials. The secondary objective is to initiate a dialogue in attempt to establish reliability requirements for LTCC packages dedicated for high-temperature operation.     

Dynamic mechanical behaviour of random copolymers of a LC-methacrylate and octyl methacrylate

The dynamic mechanical behaviour of random copolymers of LC monomer-1-(hexyloxycarbonyl)ethyl 4-[4-(methacryloyloxy)benzoyloxy]benzoate (HB) and octyl methacrylate (OMA) was studied in the main transition and flow regions. Even though the aliphatic end groups of the side chain of HB and OMA are roughly the same, the T _g temperature of poly(HB) is ∼ 80 K higher than that of poly(OMA); this fact is due to the presence of the stiff phenyl benzoate mesogenic group in the side chain of HB. With increasing content of OMA in the copolymer the superimposed curves of the storage G′ _p and loss G′′ _p moduli at a constant temperature shift towards shorter frequencies. It has been shown that this shift is mainly due to an increase of the free volume in the copolymers with increasing content of OMA. While HB monomer shows liquid crystalline (LC) properties, its polymer (poly(HB)) and random copolymers with OMA show only isotropic thermal behaviour because no flexible spacer is present in the side chain of HB which would decouple the main chain and mesogenic group motions. This means that neither the homopolymer of HB, nor its copolymers with a flexible comonomer retain the LC properties of the starting LC monomer, HB. Received: 26 September 1996/Revised: 7 November 1996/Accepted: 7 November 1996     

Operating limits and features of direct air capture on K2CO3/ZrO2 composite sorbent

Potassium carbonate-based sorbents are prospective materials for direct air capture (DAC). In the present study, we examined and revealed the influence of the temperature swing adsorption (TSA) cycle conditions on the CO₂ sorption properties of a novel aerogel-based K₂CO₃/ZrO₂ sorbent in a DAC process. It was shown that the humidity and temperature drastically affect the sorption dynamic and sorption capacity of the sorbent. When a temperature at the sorption stage was 29 ℃ and a water vapor pressure in the feed air was 5.2 mbar (1 bar = 10⁵ Pa), the composite material demonstrated a stable CO₂ sorption capacity of 3.4% (mass). An increase in sorption temperature leads to a continuous decrease in the CO₂ absorption capacity reaching a value of 0.7% (mass) at T = 80 ℃. The material showed the retention of a stable CO₂ sorption capacity for many cycles at each temperature in the range. Increasing P_H2O in the inlet air from 5.2 to 6.8 mbar leads to instability of CO₂ sorption capacity which decreases in the course of 3 consecutive TSA cycles from 1.7% to 0.8% (mass) at T = 29 ℃. A further increase in air humidity only facilitates the deterioration of the CO₂ sorption capacity of the material. A possible explanation for this phenomenon could be the filling of the porous system of the sorbent with solid reaction products and an aqueous solution of potassium salts, which leads to a significant slowdown in the CO₂ diffusion in the composite sorbent grain. To investigate the regeneration step of the TSA cycle in situ, the macro ATR-FTIR (attenuated total reflection Fourier-transform infrared) spectroscopic imaging was applied for the first time. It was shown that the migration of carbonate-containing species over the surface of sorbent occurs during the thermal regeneration stage of the TSA cycle. The movement of the active component in the porous matrix of the sorbent can affect the sorption characteristics of the composite material. The revealed features make it possible to formulate the requirements and limitations that need to be taken into account for the practical implementation of the DAC process using the K₂CO₃/ZrO₂ composite sorbent.     

Proton beam writing and electroplating for the fabrication of high aspect ratio Au microstructures

We present an approach to fabricate tall high aspect ratio Au microstructures by means of proton beam direct writing. Combining proton beam direct writing and electroplating, we successfully produced gold structures with sub-micrometer lateral dimensions, structure heights in excess of 11 μm, and aspect ratios over 28. Sidewall quality of the Au structures was improved by lowering the process temperature to 20 °C when developing PMMA patterns with GG developer. The application of such structures as X-ray masks for deep X-ray lithography with synchrotron radiation was demonstrated.     

Peculiarities in thermal evolution of precipitated amorphous calcium phosphates with an initial Ca/P ratio of 1:1

Thermal evolution of amorphous calcium phosphate (ACP) powder from a fast nitrate synthesis with a Ca/P ratio of 1:1 were studied in the range of 20–980?°C. The powder consisted of amorphous dicalcium phosphate anhydrate (CaHPO₄) after heating to 200?°C. CaHPO₄ gradually condensed to amorphous calcium pyrophosphate Ca₂P₂O₇ (CPP) between 200 to 620?°C. Amorphous CPP crystallized at 620–740?°C to a metastable polymorph α′-CPP of the high-temperature phase α-CPP and β-CPP. The α′-CPP/ β-CPP phase ratio reached a maximum at 800?°C (60?wt% α′-CPP/40?wt% β-CPP), and α′-CPP gradually transformed to β-CPP at a higher temperature. Some β-TCP occurred at 900?°C, so that a three-phasic mixture was obtained in the powder heated to 980?°C. The occurrence of metastable α′-CPP is attributed to Ostwald’s step rule, and a mechanism for β-TCP formation is proposed. The advantages of prospective biomaterials from these powders are discussed.