A Novel Volume-Stable Collagen Matrix Induces Changes in the Behavior of Primary Human Oral Fibroblasts,Periodontal Ligament,and Endothelial Cells

The aim of the present study was to investigate the influence of a novel volume-stable collagen matrix (vCM) on early wound healing events including cellular migration and adhesion, protein adsorption and release, and the dynamics of the hemostatic system. For this purpose, we utilized transwell migration and crystal violet adhesion assays, ELISAs for quantification of adsorbed and released from the matrix growth factors, and qRT-PCR for quantification of gene expression in cells grown on the matrix. Our results demonstrated that primary human oral fibroblasts, periodontal ligament, and endothelial cells exhibited increased migration toward vCM compared to control cells that migrated in the absence of the matrix. Cellular adhesive properties on vCM were significantly increased compared to controls. Growth factors TGF-β1, PDGF-BB, FGF-2, and GDF-5 were adsorbed on vCM with great efficiency and continuously delivered in the medium after an initial burst release within hours. We observed statistically significant upregulation of genes encoding the antifibrinolytic thrombomodulin, plasminogen activator inhibitor type 1, thrombospondin 1, and thromboplastin, as well as strong downregulation of genes encoding the profibrinolytic tissue plasminogen activator, urokinase-type plasminogen activator, its receptor, and the matrix metalloproteinase 14 in cells grown on vCM. As a general trend, the stimulatory effect of the vCM on the expression of antifibrinolytic genes was synergistically enhanced by TGF-β1, PDGF-BB, or FGF-2, whereas the strong inhibitory effect of the vCM on the expression of profibrinolytic genes was reversed by PDGF-BB, FGF-2, or GDF-5. Taken together, our data strongly support the effect of the novel vCM on fibrin clot stabilization and coagulation/fibrinolysis equilibrium, thus facilitating progression to the next stages of the soft tissue healing process.     

The Non-Erythropoietic EPO Analogue Cibinetide Inhibits Osteoclastogenesis In Vitro and Increases Bone Mineral Density in Mice

The two erythropoietin (EPO) receptor forms mediate different cellular responses to erythropoietin. While hematopoiesis is mediated via the homodimeric EPO receptor (EPOR), tissue protection is conferred via a heteromer composed of EPOR and CD131. In the skeletal system, EPO stimulates osteoclast precursors and induces bone loss. However, the underlying molecular mechanisms are still elusive. Here, we evaluated the role of the heteromeric complex in bone metabolism in vivo and in vitro by using Cibinetide (CIB), a non-erythropoietic EPO analogue that exclusively binds the heteromeric receptor. CIB is administered either alone or in combination with EPO. One month of CIB treatment significantly increased the cortical (~5.8%) and trabecular (~5.2%) bone mineral density in C57BL/6J WT female mice. Similarly, administration of CIB for five consecutive days to female mice that concurrently received EPO on days one and four, reduced the number of osteoclast progenitors, defined by flow cytometry as Lin⁻CD11b⁻Ly6C^hi CD115⁺, by 42.8% compared to treatment with EPO alone. In addition, CIB alone or in combination with EPO inhibited osteoclastogenesis in vitro. Our findings introduce CIB either as a stand-alone treatment, or in combination with EPO, as an appealing candidate for the treatment of the bone loss that accompanies EPO treatment.     

Verhalten austenitischer Manganstähle in Meerwasser

Auslagerungsversuche mit verschiedenen geschweißten und verspannten Proben aus den chromhaltigen austenitischen Manganstählen X 40 MnCrN 19 und X 12 MnCr 18 12 sowie dem chromfreien Stahl X 50 Mn 20 in Meerwasser der Nord- und Ostsee. Makroskopische und mikroskopische Beurteilung der Proben nach sechs Wochen, einem halben Jahr, einem Jahr und zwei Jahren hinsichtlich Beständigkeit gegen unterschiedliche Korrosionserscheinungen, besonders hinsichtlich transkristalliner Spannungsrißkorrosion.     

Cloning and heterologous expression of three type II PKS gene clusters from Streptomyces bottropensis

Mensacarcin is a potent cytotoxic agent isolated from Streptomyces bottropensis. It possesses a high content of oxygen atoms and two epoxide groups, and shows cytostatic and cytotoxic activity comparable to that of doxorubicin, a widely used drug for antitumor therapy. Another natural compound, rishirilide A, was also isolated from the fermentation broth of S. bottropensis. Screening a cosmid library of S. bottropensis with minimal PKS-gene-specific primers revealed the presence of three different type II polyketide synthase (PKS) gene clusters in this strain: the msn cluster (mensacarcin biosynthesis), the rsl cluster (rishirilide biosynthesis), and the mec cluster (putative spore pigment biosynthesis). Interestingly, luciferase-like oxygenases, which are very rare in Streptomyces species, are enriched in both the msn cluster and the rsl cluster. Three cosmids, cos2 (containing the major part of the msn cluster), cos3 (harboring the mec cluster), and cos4 (spanning probably the whole rsl cluster) were introduced into the general heterologous host Streptomyces albus by intergeneric conjugation. Expression of cos2 and cos4 in S. albus led to the production of didesmethylmensacarcin (DDMM, a precursor of mensacarcin) and the production of rishirilide A and B (a precursor of rishirilide A), respectively. However, no product was detected from the expression of cos3. In addition, based on the results of isotope-feeding experiments in S. bottropensis, a putative biosynthesis pathway for mensacarcin is proposed.     

AES investigation of the stainless steel surface oxidized in plasma

Auger electron spectroscopy (AES) depth profiling was used to study the oxidation phenomena of AISI316L stainless steel during treatment with oxygen plasma. Samples were exposed to low-pressure RF plasma with a high dissociation degree, so that the flux of oxygen atoms onto the sample surface exceeded 10²⁴ m⁻² s⁻¹. A set of samples was oxidized 4 min at different temperatures up to 1300 K during plasma treatment. AES measurements showed that the oxide film thickness increased with the increasing temperature. The thickness of the oxide film on the samples oxidized in plasma at 300 K was nearly the same as for the untreated sample. The thickness of the oxide film of the samples which were oxidized at 1000 K was about 170 nm and it consisted of iron oxide. The thickest oxide film of about 350 nm was found on the samples heated in oxygen plasma to 1300 K. Depth profiling showed the uppermost layer of manganese oxide, followed by a mixture of chromium oxide and iron oxide. The scanning electron microscope analyses showed a dramatic increase of the surface roughness.     

Energy efficient control of a BTX dividing-wall column

Dividing-wall column (DWC) is considered nowadays the new champion in distillation, as it can bring substantial reduction in the capital invested as well as savings in the operating costs. This work presents the simulation results of energy efficient control and dynamics of a dividing-wall column (DWC). In order to allow a fair comparison of the results with previously published references, the case-study considered here is the industrially relevant ternary separation of the mixture benzene-toluene-xylene (BTX) in a DWC. Rigorous simulations were carried out in Aspen Plus and Aspen Dynamics. Several conventional control structures based on PID control loops (DB/LSV, DV/LSB, LB/DSV, LV/DSB) were used as a control basis. These control structures were enhanced by adding an extra loop controlling the heavy component composition in the top of the prefractionator, by using the liquid split as an additional manipulated variable, thus implicitly achieving minimization of energy requirements. The results of the dynamic simulations show relatively short settling times and low overshooting especially for the DB/LSV and LB/DSV control structures. Moreover, the energy efficient control proposed in this work allows the operation of DWC with minimum energy requirements or maximum purity of products.     

Evaporation of liquids on chemically patterned surfaces

We studied evaporation rates of volatile liquids deposited onto chemically patterned surfaces by means of experiments and numerical simulations. We quantified the influence of the droplet geometry, in particular circular, triangular, rectangular and square shapes, as well as the influence of contact angles. We considered the two cases of vaporization both in stagnant atmospheres as well as in the presence of well-defined laminar airflows. While lateral air-convection enhances evaporation, it causes a dependence of the evaporation rate on the pattern orientation with respect to the airflow. Neighboring droplets and rivulets tend to mutually reduce their evaporation rate relative to isolated patterns.     

A Genomics-Based Model for Prediction of Severe Bioprosthetic Mitral Valve Calcification

Severe bioprosthetic mitral valve calcification is a significant problem in cardiovascular surgery. Unfortunately, clinical markers did not demonstrate efficacy in prediction of severe bioprosthetic mitral valve calcification. Here, we examined whether a genomics-based approach is efficient in predicting the risk of severe bioprosthetic mitral valve calcification. A total of 124 consecutive Russian patients who underwent mitral valve replacement surgery were recruited. We investigated the associations of the inherited variation in innate immunity, lipid metabolism and calcium metabolism genes with severe bioprosthetic mitral valve calcification. Genotyping was conducted utilizing the TaqMan assay. Eight gene polymorphisms were significantly associated with severe bioprosthetic mitral valve calcification and were therefore included into stepwise logistic regression which identified male gender, the T/T genotype of the rs3775073 polymorphism within the TLR6 gene, the C/T genotype of the rs2229238 polymorphism within the IL6R gene, and the A/A genotype of the rs10455872 polymorphism within the LPA gene as independent predictors of severe bioprosthetic mitral valve calcification. The developed genomics-based model had fair predictive value with area under the receiver operating characteristic (ROC) curve of 0.73. In conclusion, our genomics-based approach is efficient for the prediction of severe bioprosthetic mitral valve calcification.     

Is the analysis of molecular electronic structure of corrosion inhibitors sufficient to predict the trend of their inhibition performance

The often used approach in the corrosion inhibition studies employing quantum chemical calculations that relies on the correlation between molecular electronic structure parameters and inhibition effectiveness is critically examined. It is shown that the inhibition performance of three selected triazole-based corrosion inhibitors for copper - 3-amino-1,2,4-triazole (ATA), benzotriazole (BTAH), and 1-hydroxybenzotriazole (BTAOH) - cannot be explained on this basis in a sound manner. As the effectiveness of inhibitors is due to several phenomena, the outcome depends on the interplay between them and although molecular electronic parameters may provide many necessary elements, the involved effects can be estimated only approximately which may not always suffice. This supports the proposition that in general molecular electronic properties cannot be directly related to inhibition effectiveness - the actual relation is more involved - thus emphasizing the importance of a rigorous modeling of the inhibitor-surface interaction in the corrosion inhibition studies.