Characterization of synthetic hydrocalumite-type [Ca2Al(OH)6]NO3·mH2O: Effect of the calcination temperature

A lamellar hydrocalumite-type [Ca₂Al(OH)₆]NO₃·mH₂O, (HC), was synthesized and characterized by X-ray diffraction analysis (XRD), surface area, pore size measurements, CO₂-Thermal Programmed Desorption, and later tested as catalysts in the double bond isomerization of 1-butene. The layered structure of HC collapses above 523 K yielding an amorphous material at 573 K which upon calcination at 873–973 K transforms into a mixture of CaO and mayenite Ca₁₂Al₁₄O₃₃. The calcination temperature has a marked effect in the formation of basic sites. Thus for example, HC calcined at 1073 K shows 90% of strong basic sites (CO₂ desorption at 1023 K) while they are absent in HC calcined at 573–673 K. HC calcined at 973 K shows high catalytic activity (74% conversion) in the isomerization of 1-butene without any appreciable deactivation after 4 h on stream.     

Specific detection of viable Listeria monocytogenes in Spanish wastewater treatment plants by Fluorescent In Situ Hybridization and PCR

Listeria monocytogenes detection in wastewater can be difficult because of the large amount of background microbiota and the presence of viable but non-culturable forms in this environment. The aim of this study was to evaluate a Fluorescent In Situ Hybridization (FISH) assay combined with Direct Viable Count (DVC) method for detecting viable L. monocytogenes in wastewater samples, as an alternative to conventional culture methods. 16S rRNA sequence data were used to design a specific oligonucleotide probe. In order to assess the suitability of the method, the assays were performed on naturally (n = 87) and artificially (n = 14) contaminated samples and results were compared to those obtained with the isolation of cells on selective media and with a PCR method. The detection limit of FISH and PCR assays was 10⁴ cells/mL without enrichment and 10 cells/mL after enrichment. A total of 47 samples, including 3 samples from effluent sites, yielded FISH positive results for L. monocytogenes. Using DVC-FISH technique, the presence of viable L. monocytogenes cells was detected in 23 out of these 47 FISH positive wastewater samples. PCR and culture methods yielded 27 and 23 positive results, respectively. According to these results, FISH technique has the potential to be used as a sensitive method for the detection and enumeration of L. monocytogenes in environmental wastewater samples.     

Au-Sn SLID Bonding: A Reliable HT Interconnect and Die Attach Technology

Au-Sn solid–liquid interdiffusion (SLID) bonding is an established reliable high temperature (HT) die attach and interconnect technology. This article presents the life cycle of an optimized HT Au-Sn SLID bond, from fabrication, via thermal treatment, to mechanical rupture. The layered structure of a strong and uniform virgin bond was identified by X-ray diffraction to be Au/ζ (Au_0.85Sn_0.15)/Au. During HT exposure, it was transformed to Au/β (Au_1.8Sn_0.2)/Au. After HT exposure, the die shear strength was reduced by 50 pct, from 14 Pa to 70 MPa, which is still remarkably high. Fractographic studies revealed a change in fracture mode; it was changed from a combination of adhesive Au/Ni and cohesive SiC fracture to a cohesive β-phase fracture. Design rules for high quality Au-Sn SLID bonds are given.     

Testing software components for integration: a survey of issues and techniques

Component‐based development has emerged as a system engineering approach that promises rapid software development with fewer resources. Yet, improved reuse and reduced cost benefits from software components can only be achieved in practice if the components provide reliable services, thereby rendering component analysis and testing a key activity. This paper discusses various issues that can arise in component testing by the component user at the stage of its integration within the target system. The crucial problem is the lack of information for analysis and testing of externally developed components. Several testing techniques for component integration have recently been proposed. These techniques are surveyed here and classified according to a proposed set of relevant attributes. The paper thus provides a comprehensive overview which can be useful as introductory reading for newcomers in this research field, as well as to stimulate further investigation. Copyright © 2006 John Wiley & Sons, Ltd.     

Control system to counteract axial displacement during the welding of huge pipes

Development research has been carried out in order to solve a practical industrial problem: to counteract axial displacement (axial drift or axial creep) of workpieces during the welding process. Solutions found in the literature generally provide adequate results; however, they are mechanically complex with high purchase and maintenance costs. A mechanically simple and inexpensive solution is proposed in this paper. Axial drift is measured with a low-cost custom-built contact displacement sensor. This sensor can measure axial drift without calibration or set-up operations. It is highly robust in order to function correctly in industrial conditions. A pneumatic cylinder moves the idle turning roll along a rail, modifying the longitudinal position of the idle turning roll in order to counteract axial drift. The position of the idle turning roll is controlled by a control algorithm, which consists of a set of rules. Tests were carried out in order to validate the proposed solution, which can be applied to existing turning rolls thereby significantly reducing costs.     

Deposition and photo-induced electrical resistivity of dip-coated NiO thin films from a precipitation process

Thin films of the semiconductor NiO are deposited using a straightforward combination of simple and versatile techniques: the co-precipitation in aqueous media along with the dip- coating process. The obtained material is characterized by gravimetric/differential thermal analysis (TG–DTA) and X-ray diffraction technique. TG curve shows 30 % of total mass loss, whereas DTA indicates the formation of the NiO phase about 578 K (305 °C). X-ray diffraction (XRD) data confirms the FCC crystalline phase of NiO, whose crystallinity increases with thermal annealing temperature. UV–Vis optical absorption measurements are carried out for films deposited on quartz substrate in order to avoid the masking of bandgap evaluation by substrate spectra overlapping. The evaluated bandgap is about 3.0 eV. Current–voltage (I–V) curves measured for different temperatures as well as the temperature-dependent resistivity data show typical semiconductor behavior with the resistivity increasing with the decreasing of temperature. The Arrhenius plot reveals a level 233 meV above the conduction band top, which was attributed to Ni²⁺ vacancy level, responsible for the p-type electrical nature of NiO, even in undoped samples. Light irradiation on the films leads to a remarkable behavior, because above bandgap light induced a resistivity increase, despite the electron–hole generation. This performance was associated with excitation of the Ni²⁺ vacancy level, due to the proximity between energy levels.     

Detection of lead in Zea mays by dual‐energy X‐ray microtomography at the SYRMEP beamline of the ELETTRA synchrotron and by atomic absorption spectroscopy

This study is related to the application of the X‐ray dual‐energy microradiography technique together with the atomic absorption spectroscopy (AAS) for the detection of lead on Zea mays stem, ear, root, and leaf samples. To highlight the places with lead intake, the planar radiographs taken with monochromatic X‐ray radiation in absorption regime with photon energy below and above the absorption edge of a given chemical element, respectively, are analyzed and processed. To recognize the biological structures involved in the intake, the dual‐energy images with the lead signal have been compared with the optical images of the same Z. mays stem. The ear, stem, root, and leaf samples have also been analyzed with the AAS technique to measure the exact amount of the hyperaccumulated lead. The AAS measurement revealed that the highest intake occurred in the roots while the lowest in the maize ears and in the leaf. It seems there is a particular mechanism that protects the seeds and the leaves in the intake process. Microsc. Res. Tech., 2010. © 2009 Wiley‐Liss, Inc. This article was published online on 1 December 2009. An error was subsequently identified. This notice is included in the online and print version to indicate that both have been corrected 19 February 2010.