Effect of temperature on the pre-creep mechanical properties of silicon nitride

The elasto-plastic properties and contact damage evolution of a commercial polycrystalline silicon nitride are evaluated as a function of temperature up to 1000 °C, using a recently developed method combining Hertzian indentation and FEM simulation. The results of the study are compared to existing data for other ceramic materials such as alumina and zirconia. Silicon nitride is found to exhibit an excellent combination of elasto-plastic properties in the pre-creep temperature range and good contact damage resistance. These qualities make this material ideal for high temperature applications in general, and in particular to be used in spherical indenters for the evaluation of mechanical properties of other materials at elevated temperature using the procedure applied in this work.     

Synthesis, Molecular Characterization and Preliminary Antioxidant Activity Evaluation of Quercetin Fatty Esters

Quercetin shows interesting pharmacological effects, but its use in topical applications is limited by its low skin permeability and solubility. In this work, the synthesis of highly lipophilic quercetin esters with oleic, linoleic and linolenic acid useful as topical quercetin prodrugs is reported. Partial OH esterification is advisable to maintain the antioxidant activity of these compounds; tetraesters and triesters can be achieved by modulating the reaction conditions utilized for the total esterification of quercetin. The chemical structures of the esters were proven by spectroscopic techniques; quantum chemical NMR calculation were mandatory to unequivocally assign the free position in triesters. Finally, the antioxidant activity of all the synthesized compounds was determined by the 2,2-diphenyl-1-picryl-hydrazyl method and by 2,2-azinobis(3-ethyl-benzothiazoline-6-sulfonic acid) assay.     

Quantitative detection of trichloroacetic acid in human urine using isotope dilution high-performance liquid chromatography-electrospray ionization tandem mass spectrometry

The chemical disinfection of drinking water to control microbial contaminants results in the formation of disinfection byproducts (DBPs). The volatile trihalomethanes and the nonvolatile haloacetic acids (HAAs) are the most prevalent DBPs. It is important to monitor human exposure to HAAs because of their potential adversehealth effects, such as cancer. Among the HAAs, urinary trichloroacetic acid (TCAA) is a potential valid biomarker for assessing chronic ingestion exposure to HAAs from drinking water. We have developed a rugged, high-throughput, sensitive, accurate, and precise assay for the measurement of trace levels of TCAA in human urine using a simple solid-phase extraction (SPE) cleanup followed by isotope dilution high-performance liquid chromatography tandem mass spectrometry (HPLC-MS/MS). TCAA is extracted from the urine using SPE, separated from other extract components by reversed-phase HPLC, and analyzed by negative ion electrospray ionization-isotope dilution-MS/MS using a multiple reaction monitoring experiment. The method is simple and fast and is not labor intensive (sample preparation and analysis can be performed in approximately 15 min) with a limit of detection of 0.5 ng/mL in 1 mL of urine.     

Temperature effects on trigate SOI MOSFETs

Trigate silicon-on-insulator (SOI) MOSFETs have been measured in the 5-400 K temperature range. The device fin width and height is 45 and 82 nm, respectively, and the p-type doping concentration in the channel is 6/spl times/10/sup 17/ cm/sup -3/. The subthreshold slope varies linearly with temperature as predicted by fully depleted SOI MOS theory. The mobility is phonon limited for temperatures larger than 100 K, while it is limited by surface roughness below that temperature. The corner effect, in which the device corners have a lower threshold voltage than the top and sidewall Si/SiO/sub 2/ interfaces, shows up at temperatures lower than 150 K.     

From application service provision to service-oriented computing: A study of the IT outsourcing evolution

IT outsourcing is not a new concept. Originating from the early 60’s in the form of time sharing, IT outsourcing has evolved to the application service provision (ASP) model, in the late 90’s to pure services in the beginning of the century. Services, and their major representative web services, are actually the next phase of the movement toward Internet-based componentized software, known in the not so distant past as ASP. As the continuous expansion of the Internet and its relating technologies creates new marketing opportunities, traditional monolithic architectures are giving way to service-oriented computing (SOC), the architecture that enables service provision. SOC permits the utilization of large systems which are comprised of self-containing building blocks: services. Services may be made public, searched, reused and combined to form complex business processes while in the same time retaining a significant level of flexibility. Services and SOC have emerged as a response to a fundamental shift in enterprise business culture that started at the late 90’s. Although they are promising as an IT outsourcing enabler, many issues need to be dealt with before they can be considered suitable for wide adoption. These issues are of technological, business, economic and cultural nature and they were also faced by ASPs in the past. It is worth revisiting the successes and failures of the ASP model in order to get a better understanding of the evolving IT outsourcing industry. In this work, we describe the evolution of service provision from its initial form as software application, through the application service provision era and towards the new trend of web services.     

Prediction of botanical composition in grassland herbage samples by near infrared reflectance spectroscopy

Near infrared reflectance spectroscopy (NIRS) was evaluated as a method to predict the botanical composition of seminatural grassland in ‘dehesa’ systems. Samples of herbaceous biomass were harvested over four consecutive years, determining in each—by manual separation—the proportion by weight of the following taxonomic groups: grasses, legumes and the rest of the families in a single block (‘others’). After reconstructing the natural samples they were analysed by NIRS. One set of samples (calibration set) was selected for the development of the equations, assaying different mathematical treatments (log l/R, first derivative and second derivative). The ranges of coefficients of multiple determination and standard errors of calibration, respectively, for the various components were: grasses, 0.86 to 0.92 and 6.66 to 9.14; legumes, 0.77 to 0.81 and 6.82 to 7.43; and ‘others’, 0.85 to 0.88 and 8.17 to 9.54. The remaining samples not included in the development of the NIRS equations (prediction set) were used for the purposes of validating the best equations. Standard errors of performance were: grasses, 6.12; legumes, 7.56 and ‘others’, 7.70.     

Optical properties of high-density dispersions of particles: application to intralipid solutions

We propose to study the scattering properties of dense distributions of spherical scatterers by resorting to an iterative solution of the Foldy-Twersky equation for the propagation of the coherent field. As a result of the first step of the iterative procedure, the host medium is substituted by an effective medium of complex refractive index to account for the multiple-scattering processes that occur among the particles. Although we truncate the above-mentioned iterative procedure to the second step, the results of our calculations are in excellent agreement with previous experimental results of Zaccanti et al. ("Measurement of optical properties of high-density media," to be published in Applied Optics) for the scattering coefficient of Intralipid solutions up to a volume density of 15% and show a limited disagreement at a volume density of 22%.     

Fabrication of bronze components by metal injection moulding using powders with different particle characteristics

The aim of this work is to fabricate bronze components by metal injection moulding (MIM) studying the possibility of changing partially or totally the gas atomised powder by water atomised ones that are cheaper than the former. In order to carry out this study, a bronze 90/10 gas atomised spherical powder (usual MIM powder <22 μm) and two water atomised irregular powders (particle size <35 μm and <140 μm) were mixed in different proportions. As received powders and their mixtures were used to fabricate feedstocks and processed by MIM to evaluate the influence of powder particle size and morphology on debinding and sintering stages. Finally, both mechanical properties hardness and maximum flexural stress were determined to characterize the sintered materials. The addition of irregular fine and coarse powders was found to affect the moulding process, although densities and mechanical properties close to values of gas atomised one were obtained after sintering. Therefore, the use of water atomised bronze powders could be a promising way to diminish production costs in this technology.     

Enhancement of activity and selectivity in lipase‐catalyzed transesterification in ionic liquids by the use of additives

BACKGROUND: Seven ionic liquids (ILs) based on 1-alkyl-3-methylimidazolium cation in combination with hexafluorophosphate and bis{(trifluoromethyl)sulfonyl}imide anions were tested as reaction media for lipase-catalyzed transesterification in low water conditions. With the aim of improving the activity and/or selectivity of the lipase, various treatments were applied to ionic liquid media such as equilibration with aqueous solutions of salts, NaHCO₃ or Na₂CO₃, or the addition of a catalytic amount of a non-reactive organic base to the reaction mixture, triethylamine. RESULTS: The treated ionic liquids were shown to be excellent media for lipase-catalyzed ester synthesis by transesterification compared with conventional organic solvents, such as n-hexane. All treatments were found to enhance the synthetic activity of the enzyme, the best results being achieved with the addition of triethylamine. The addition of a catalytic amount of this base to the ILs resulted in a significant increase in both the synthetic activity and selectivity values. For instance, the synthetic activity in [emim⁺][TfN₂⁻] was enhanced more than 12 times and the selectivity increased from 86% to 95% when triethylamine was used. CONCLUSION: These treatments could be easy-to-use approaches to improve the efficiency of enzymatic reactions in ionic liquids when the reaction does not proceed smoothly. Copyright © 2007 Society of Chemical Industry